2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty

2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty
2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty
2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty

2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty
2013 HONDA CIVIC SEDAN. 2013 HONDA CIVIC COUPE. 2012 HONDA CIVIC SEDAN. 2012 HONDA CIVIC COUPE. ALL HARNESSING AND CONNECTIONS NEEDED ARE SUPPLIED IN THIS KIT. PRODUCT DOES NOT APPLY TO VEHICLES TRIMMED WITH FACTORY NAVIGATION SYSTEM. INSTALL INSTRUCTIONS ARE BELOW. Drill hole utilizing provided holesaw. Be sure to pre-inspect area prior to drilling for proper clearance and safe mounting. Feed camera wires thru hole and follow path of original harnessing making your way to the factory screen location. Power and ground for camera. Power and ground for camera can be located and utilized from the rear tail light assembly. At the reverse light, locate the BROWN wire and connect red camera 12 volt wire. Locate a clean, paint free metal chassis spot and connect camera ground wire. Tap on an extra wire from the brown reverse wire at the taillight, long enough to run along with the camera video wire. This will be needed to connect to the screen as well as the video rca for picture. Run cables (both extra power wire and video rca) from camera to the rear of the screen in the dash. Be sure to avoid any pinch points or potential areas that can damage the camera wires. Connect the extra power wire from the taillight to the power wire coming off of the provided screen harness (this will tell the monitor when to show camera everytime the vehicle is in reverse). Connect the video rca to the provided harness rca input. This will provide the video signal to the screen provided that power, ground and video for the camera have been connected properly. Test your camera system. Make sure u have sufficient battery power before testing. Camera should activate and display on original screen while in reverse. NOTE: Camera system is not compatible with navigation equipped models. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “wayne81473″ and is located in this country: US. This item can be shipped worldwide.
  • Camera Connection Type: Wired
  • Model: HONDA CAM
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Compatible Vehicle Make: Honda
  • Custom Bundle: No
  • Screen Display: LCD
  • Country of Manufacture: China
  • Type: Rear View Camera Kit
  • Brand: aftermarket
  • Screen Size: 5\

2012-2016 Honda CIVIC Back Up Camera System Kit Inc. Harness 3 Year Warranty

Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup

Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup

Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup
2014-15 Chevrolet Silverado 1500 Upgrade Rear View Camera Kit. 2015 Chevrolet Silverado 2500 HD Upgrade Rear View Camera Kit. 2015 Chevrolet Silverado 3500 HD Upgrade Rear View Camera Kit. 2014-15 GMC Sierra 1500 Upgrade Rear View Camera Kit. 2015 GMC Sierra 2500 HD Upgrade Rear View Camera Kit. 2015 GMC Sierra 3500 HD Upgrade Rear View Camera Kit. Lens Angle: 167° / 138° / 112°. 8 meter (26-1/4 feet) video cable with RCA connector. 3 meter (9-3/4 feet) fused power cable. Note: A separate monitor/display with an RCA video input will be needed to complete this installation. This part will not work with the factory wiring. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. Paint To Match Note. “Paint-to-match finish” refers to a smooth, paintable surface. Paint offers better coverage and adhesion, but it is not necessary for installation. This part is designed as an upgrade from the factory. We suggest professional installation as modification to your vehicle is necessary, and instructions are not included. Lowest price on brand new, in-the-box auto parts. In order to keep our prices low, we have the following purchasing policies. We’re here for you! The item “Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup” is in sale since Friday, February 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Camera, Monitor & Sensor Kits”. The seller is “am-autoparts” and is located in Gardner, Kansas. This item can be shipped to United States.
  • Brand: AM Autoparts
  • Placement on Vehicle: Rear
  • Manufacturer Part Number: AM-2193779128
  • Other Part Number: AM-2193779128
  • Custom Bundle: No
  • Interchange Part Number: 2014 2015 2016 Sierra 1500 Sierra 2500 HD Sierra 3500
  • Superseded Part Number: 2014 2015 2016 Sierra 1500 Sierra 2500 HD Sierra 3500
  • Manufacturer Warranty: 10 Year

Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Pickup

MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE

MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE

MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE
MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE. Title – MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE. Model – E-CLASS (W212). Part number – A2124406834. Year of Manufacture – 2012. This part is brand NEW, directly from factory (Not Chinese replacement or Refurbished like other sellers have for same price), 100% suitable and Original. Please pay within 3 days of ordering. We accept following payments methods. If you are not happy with your item please return in the original packaging and with all tags attached within 14 days. The item “MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE” is in sale since Thursday, January 2, 2020. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Starters, Alternators, ECUs & Wiring\Wiring Harnesses, Cables & Connectors”. The seller is “oem_genuine_parts” and is located in Vilnius. This item can be shipped worldwide.
  • Manufacturer Part Number: A2124406834
  • Brand: Mercedes-Benz

MERCEDES-BENZ E W212 Rear-View Camera Wiring Harness A2124406834 NEW GENUINE

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck
TRQ Rear View Camera Add On Kit w/ Wiring Harness & Tailgate Handle for GM Truck. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. Lens Angle: 167° / 138° / 112°. 8 meter (26-1/4 feet) video cable with RCA connector. 3 meter (9-3/4 feet) fused power cable. Note: A separate monitor/display with an RCA video input will be needed to complete this installation. This part will not work with the factory wiring. Upgrade – Modification Necessary. This part is designed as an upgrade from the factory. Professional installation is recommended as modification to your vehicle is necessary, and instructions are not included. 2014-15 Chevrolet Silverado 1500 Upgrade Rear View Camera Kit. 2015 Chevrolet Silverado 2500 HD Upgrade Rear View Camera Kit. 2015 Chevrolet Silverado 3500 HD Upgrade Rear View Camera Kit. 2014-15 GMC Sierra 1500 Upgrade Rear View Camera Kit. 2015 GMC Sierra 2500 HD Upgrade Rear View Camera Kit. 2015 GMC Sierra 3500 HD Upgrade Rear View Camera Kit. The item “TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck” is in sale since Tuesday, September 5, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Safety & Security\Other Safety & Security”. The seller is “1aauto” and is located in Gardner, Kansas. This item can be shipped to United States.
  • Brand: TRQ
  • Placement on Vehicle: Rear
  • Manufacturer Part Number: ADA40437
  • Other Part Number: 1ADHS01628
  • California Prop 65 Warning: Attention California Customers: WARNING: Cancer and Reproductive Harm -
  • Custom Bundle: No
  • Interchange Part Number: 2014 2015 2016 2017 Sierra 1500 Sierra 2500 HD Sierra 3500
  • Superseded Part Number: 2014 2015 2016 2017 Sierra 1500 Sierra 2500 HD Sierra 3500
  • Type: Park Assist Camera
  • Warranty: Lifetime

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for GM Truck

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Ford Backup Camera Input Harness and CANopener Flash Programmer. For SYNC 1 4.2 Screen Systems. Have a question or need advice first? Send us a Message! Add the input and capability of a backup camera to your 4.2 Screen System (see screen compatibility below). There are 2 versions of this bundle for the 4.2 screen depending on model and year. Be sure to use the compatibility listing to ensure you are purchasing the correct bundle. Another in the line of CANopener products! This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle with SYNC 1 (MyFord) in three easy steps. Install our (optional) Plug n’ Play “T” harness behind the touchscreen. Plug the camera of your choice into our T harness. Easily enable the backup camera input using included CANopener Flash programmer. The CANopener Flash programmer plugs into your vehicle’s OBDII diagnostic port under your steering column. In a matter of seconds, the Flash will enable the backup camera feature on your vehicle’s touchscreen. It will show the attached backup camera when the vehicle is placed in reverse – just like it would from the factory! Camera Video “T” Harness. Easy Plug n’ Play install. Simple DIY vehicle programming. Programming with the CANopener Flash. (same procedure with 4.2 screen). CANopener Flash Programmer – YouTube. Video will open in a new window. 4.2 MyFord Screen – Backup Camera Compatibility Testing – YouTube. Our harness will support any vehicle backup camera with a standard RCA connection. Please note, you will need to follow the camera instructions for sourcing power. If your screen is not listed please refer to the compatibility testing video. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen. This kit does not include a camera. Our staff has been part of the car audio and accessory industry for many years – specifically we have been involved in the sale, repair and modification of these Ford navigation systems since they were introduced. Our narrow focus on Ford navigation systems and accessories combined with our years of experience allow us to truly be the experts on these units. We engineer many products and solutions allowing us to offer products not available anywhere else. Our engineering team has developed custom hardware \ software tools used to program, test and diagnosis these systems. We believe service is important, not only before the sale to help you understand the options and which might be best for you but also after the sale. Our friendly and experienced technical staff are here to help. Our technicians have actually done many of these installs\upgrades and can answer most questions quickly and accurately. Everyone says they offer top-notch service but unfortunately not everyone does, so don’t just take our word for it, find out for yourself. Give us a call, write us a message or catch us on instant chat and let us prove it. We believe we accomplish this with quality products, superior service and good pricing. The item “Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A” is in sale since Monday, December 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “4dtech” and is located in Webster, New York. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 4DT-FLASHCMB-02A
  • Brand: 4D Tech
  • Non-Domestic Product: No

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford
TRQ Rear View Camera Add On Kit w/ Wiring Harness & Tailgate Handle for Ford. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. Lens Angle: 167° / 138° / 112°. 8 meter (26-1/4 feet) video cable with RCA connector. 3 meter (9-3/4 feet) fused power cable. Note: A separate monitor/display with an RCA video input will be needed to complete this installation. This part will not work with the factory wiring. WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.. Upgrade – Modification Necessary. This part is designed as an upgrade from the factory. Professional installation is recommended as modification to your vehicle is necessary, and instructions are not included. 2008-14 Ford F150 Truck Upgrade Rear View Camera Kit. 2008-15 Ford F250 Super Duty Truck Upgrade Rear View Camera Kit. 2008-15 Ford F350 Super Duty Truck Upgrade Rear View Camera Kit. 2008-15 Ford F450 Truck Upgrade Rear View Camera Kit. 2008-15 Ford F550 Truck Upgrade Rear View Camera Kit. 2008 Lincoln Mark LT Upgrade Rear View Camera Kit. The item “TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford” is in sale since Tuesday, July 11, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Safety & Security\Other Safety & Security”. The seller is “www.1aautomotive.com” and is located in Gardner, Kansas. This item can be shipped to United States.
  • Brand: TRQ
  • Placement on Vehicle: Rear
  • Manufacturer Part Number: ADA02035
  • Other Part Number: 1ADHS01655
  • California Prop 65 Warning: Attention California Customers: WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.
  • Custom Bundle: No
  • Interchange Part Number: 2008 2009 2010 2011 2012 2013 2014 2015 F150 Truck
  • Superseded Part Number: 2008 2009 2010 2011 2012 2013 2014 2015 F150 Truck
  • Warranty: Lifetime

TRQ Rear View Camera Add On Kit with Wiring Harness & Tailgate Handle for Ford

Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy

Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy

Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy
Lowest price on brand new, in-the-box auto parts. Rear View Camera Add On Kit w/ Wiring Harness Tailgate Handle & Bezel for Chevy. Lens Angle: 167° / 138° / 112°. 8 meter (26-1/4 feet) video cable with RCA connector. 3 meter (9-3/4 feet) fused power cable. Note: A separate monitor/display with an RCA video input will be needed to complete this installation. This part will not work with the factory wiring. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. This is a universal part and not a direct replacement for the existing part on your vehicle. In some situations, modifications may be necessary for it to fit and function properly. This part is designed as an upgrade from the factory. We suggest professional installation as modification to your vehicle is necessary, and instructions are not included. 2008-13 Chevrolet Silverado 1500 Upgrade Rear View Camera Kit. 2007 Chevrolet Silverado 1500 with New Body Style Upgrade Rear View Camera Kit. 2008-14 Chevrolet Silverado 2500 HD Upgrade Rear View Camera Kit. 2007 Chevrolet Silverado 2500 HD with New Body Style Upgrade Rear View Camera Kit. 2008-14 Chevrolet Silverado 3500 HD Upgrade Rear View Camera Kit. 2007 Chevrolet Silverado 3500 HD with New Body Style Upgrade Rear View Camera Kit. 2008-13 GMC Sierra 1500 Upgrade Rear View Camera Kit. 2007 GMC Sierra 1500 with New Body Style Upgrade Rear View Camera Kit. 2008-14 GMC Sierra 2500 HD Upgrade Rear View Camera Kit. 2007 GMC Sierra 2500 HD with New Body Style Upgrade Rear View Camera Kit. 2008-14 GMC Sierra 3500 HD Upgrade Rear View Camera Kit. 2007 GMC Sierra 3500 HD with New Body Style Upgrade Rear View Camera Kit. In order to keep our prices low, we have the following purchasing policies. We’re here for you! Thank you for your interest and we hope to do business with you! The item “Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy” is in sale since Saturday, August 18, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Safety & Security\Other Safety & Security”. The seller is “am-autoparts” and is located in Gardner, Kansas. This item can be shipped to United States.
  • Brand: AM Autoparts
  • Placement on Vehicle: Rear
  • Manufacturer Part Number: AM-1442225670
  • Other Part Number: AM-1442225670
  • California Prop 65 Warning: Attention California Customers: WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.
  • Custom Bundle: No
  • Interchange Part Number: 2007 2008 2009 2010 2011 2012 2013 2014 Sierra 1500
  • Superseded Part Number: 2007 2008 2009 2010 2011 2012 2013 2014 Sierra 1500
  • Warranty: 10 Year

Rear View Camera Add On Kit with Wiring Harness Tailgate Handle & Bezel for Chevy

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Ford Backup Camera Input Harness and CANopener Flash Programmer. For SYNC 1 4.2 Screen Systems. Have a question or need advice first? Send us a Message! Add the input and capability of a backup camera to your 4.2 Screen System (see screen compatibility below). NOTE: There are 2 versions of this bundle for the 4.2 screen depending on model and year. Be sure to use the compatibility listing to ensure you are purchasing the correct bundle. Another in the line of CANopener products! This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle with SYNC 1 (MyFord) in three easy steps. Install our (optional) Plug n’ Play “T” harness behind the touchscreen. Plug the camera of your choice into our T harness. Easily enable the backup camera input using included CANopener Flash programmer. The CANopener Flash programmer plugs into your vehicle’s OBDII diagnostic port under your steering column. In a matter of seconds, the Flash will enable the backup camera feature on your vehicle’s touchscreen. It will show the attached backup camera when the vehicle is placed in reverse – just like it would from the factory! Camera Video “T” Harness. Easy Plug n’ Play install. Simple DIY vehicle programming. Programming with the CANopener Flash. (same procedure with 4.2 screen). CANopener Flash Programmer – YouTube. Video will open in a new window. 4.2 MyFord Screen – Backup Camera Compatibility Testing – YouTube. Our harness will support any vehicle backup camera with a standard RCA connection. Please note, you will need to follow the camera instructions for sourcing power. If your screen is not listed please refer to the compatibility testing video. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen. This kit does not include a camera. Our staff has been part of the car audio and accessory industry for many years – specifically we have been involved in the sale, repair and modification of these Ford navigation systems since they were introduced. Our narrow focus on Ford navigation systems and accessories combined with our years of experience allow us to truly be the experts on these units. We engineer many products and solutions allowing us to offer products not available anywhere else. Our engineering team has developed custom hardware \ software tools used to program, test and diagnosis these systems. We believe service is important, not only before the sale to help you understand the options and which might be best for you but also after the sale. Our friendly and experienced technical staff are here to help. Our technicians have actually done many of these installs\upgrades and can answer most questions quickly and accurately. Everyone says they offer top-notch service but unfortunately not everyone does, so don’t just take our word for it, find out for yourself. Give us a call, write us a message or catch us on instant chat and let us prove it. We believe we accomplish this with quality products, superior service and good pricing. The item “Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2″ is in sale since Monday, December 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “4dtech” and is located in Webster, New York. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 4DT-FLASHCMB-02
  • Brand: 4D Tech
  • Non-Domestic Product: No

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2

Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch

Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch

Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch
Ford Backup Camera Input Harness and CANopener Flash Programmer. For SYNC 2 and SYNC 3 Touchscreens. Have a question or need advice first? Send us a Message! Add the input and capability of a backup camera to your MyFord Touch / SYNC 2 or SYNC 3 8 Touchscreen System. Another in the line of CANopener products! This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle with SYNC 2 (MyFord / MyLincoln Touch) or SYNC 3 in three easy steps. Install our (optional) Plug n’ Play “T” harness behind the touchscreen. Plug the camera of your choice into our T harness. Easily enable the backup camera input using included CANopener Flash programmer. The CANopener Flash programmer plugs into your vehicle’s OBDII diagnostic port under your steering column. In a matter of seconds, the Flash will enable the backup camera feature on your vehicle’s touchscreen. It will show the attached backup camera when the vehicle is placed in reverse – just like it would from the factory! Camera Video “T” Harness. Easy Plug n’ Play install. Simple DIY vehicle programming. Programming SYNC 3 with the CANopener Flash. CANopener Flash Programmer – YouTube. Video will open in a new window. Programming MYFord Touch / SYNC 2 with the CANopener Flash. All Vehicles Equipped with MyFord Touch SYNC 2 8 Touchscreen. All Vehicles Equipped with SYNC 3 8 Touchscreen. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen. This kit does not include a camera. Our staff has been part of the car audio and accessory industry for many years – specifically we have been involved in the sale, repair and modification of these Ford navigation systems since they were introduced. Our narrow focus on Ford navigation systems and accessories combined with our years of experience allow us to truly be the experts on these units. We engineer many products and solutions allowing us to offer products not available anywhere else. Our engineering team has developed custom hardware \ software tools used to program, test and diagnosis these systems. We believe service is important, not only before the sale to help you understand the options and which might be best for you but also after the sale. Our friendly and experienced technical staff are here to help. Our technicians have actually done many of these installs\upgrades and can answer most questions quickly and accurately. Everyone says they offer top-notch service but unfortunately not everyone does, so don’t just take our word for it, find out for yourself. Give us a call, write us a message or catch us on instant chat and let us prove it. We believe we accomplish this with quality products, superior service and good pricing. The item “Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch” is in sale since Monday, July 24, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “4dtech” and is located in Webster, New York. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 4DT-FLASHCMB-01
  • Brand: 4D Tech
  • Non-Domestic Product: No

Backup Camera Programmer & Harness for SYNC 2 & 3 Rear Reverse My Ford Touch

GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS

GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS

GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS
REVERSING CAMERA + HARNESS. Suitable for the following vehicles. VW MK7 Golf / R / GTI / Sportwagen / E. Composition Media radio EXCEPT Part numbers 5G0035812, 5G0035819, 5G0035819A, 5G0035820, or 5G0035820A. See behind your car with a camera in your boot. A camera at the back of your car shows you what’s behind to make reversing safer and easier. Or rear view camera lets you spot any obstacles behind your car – even moving ones – quickly. And easily, thanks to the camera built into the boot. The camera starts working as soon as you put your car into reverse gear. It shows the area behind your car on your radio or radio navigation system display offering you a clear reversing image with easy-to-follow guidelines. Guidelines to the easy parking. Using the rear view camera means you’ll be able to manoeuvre quickly and easily, even into the most difficult parking space. It also alerts you to low-down obstacles which parking sensors cannot always detect. The reversing camera is also a great help when you’re hitching up a trailer. VCDS CODING AFTER INSTALLATION IS REQUIRED. Not compatible with Composition Media with the following part numbers. 5G0035820, 5G0035819 & 5G0035812. NOW FOR THE BORING BIT. The item “GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS” is in sale since Thursday, December 5, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “bargainhunter3210″ and is located in Gatwick. This item can be shipped worldwide.
  • Compatible Vehicle Make: Volkswagen
  • Unit Quantity: 1
  • Connectivity: Wired
  • Type: Built-in Camera
  • Features: Distance Lines
  • Manufacturer Part Number: CRS907.5G0.02
  • Placement on Vehicle: Rear
  • Brand: VW
  • Colour Camera: Yes

GENUINE VW GOLF Mk7 VII REVERSING CAMERA IN EMBLEM 5G0827469F NEW WITH HARNESS