Dual Lens Brake Light Rear View Camera + Mirror Monitor for Ford Transit Custom

Posted on January 8, 2024 by admin

Dual Lens Brake Light Rear View Camera + Mirror Monitor for Ford Transit Custom

Minimum illumination: 0.1-0.5Lux / F = 1.2. Rear watching: Image can be changed left and right. Image sensor: 1/3 CMOS. Monitor Specifications 1 X 7 Mirror monitor. Screen ratio 16:9/4:3 adjustable.

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams

Posted on May 22, 2022 by admin

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams

· Image Sensor: 1/3 OV Color CCD. · Effective Pixels: 628586. · Horizontal Resolution: 600TVL. · Minimum Illumination: 1.0Lux F=1.2 (0Lux with IR on). · Diagonal Viewing Angle: 170 degree optional. · Synchronization: Internal synchronization. · Signal to noise ratio: >48db. · Signal System: NTSC. · Electronic Shutter: Auto. · Video Output: RCA interface, 1.0Vp-p, 75Ohm. · White Balance: Auto. · Backlight Compensation: Auto. · Power: DC 12V. · Current Consumption: 50-60mA, Max 130mA with IR on. · Operating Temperature: -20°C +60°C, RH95% Max. · Storage Temperature: -30°C +80°C, RH95% Max. · CCD imaging sensor. · Support NTSC Video system. · High-definition and wide viewing angle. · Applicable to variety of Vehicles: car, truck, RV, mini-van etc. · Easy to install, you can install the monitor via mount holder or universal bracket. · 1x Car Rear View Camera. · 1x10m Video Cable. Adapter cable 4 pin to AV cinch. · 1x1m Power Cable. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “yixinfan2010″ and is located in this country: CN. This item can be shipped worldwide.

Camera Connection Type: Wired
Screen Display: LCD, TFT – LCD
Brand: Unbranded
Type: Reversing Camera
Compatible Vehicle Make: Ford
Model: Ford Transit

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Posted on December 14, 2021 by admin

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Reversing Camera & 7 Monitor For Transit Custom. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “FORD TRANSIT CUSTOM REVERSING CAMERA & 7 MONITOR BACK UP BRAKE LIGHT 14 19″ is in sale since Friday, December 28, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Ford Transit Custom Reversing Camera & Mirror Monitor Brake Light 2014 2019

Posted on August 28, 2021 by admin

Ford Transit Custom Reversing Camera & Mirror Monitor Brake Light 2014 2019

Reversing Camera & Mirror Monitor For Transit Custom. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Full colour LED backlight display. With 2 video input: White video cable connects to car rearview camera, yellow one to other video equipment. Parking rearview priority: The monitor will start up automatically display the video from rearview camera when you are reversing and then close itself afterwards. Supports Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. With menu buttons, Brightness/contrast/hue/saturation/language (Chinese/English/Spanish) adjustable. No Audio input or output. Please note: This monitor is used to clip over an existing mirror. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connection. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “FORD TRANSIT CUSTOM REVERSING CAMERA & MIRROR MONITOR BRAKE LIGHT 2014 2019″ is in sale since Thursday, January 31, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Manufacturer Part Number: Does Not Apply
Brand: Unbranded

InCarTec 27-317 SYNC 2 3 Reverse Camera Addon for Ford Transit Custom 2018 On

Posted on August 7, 2021 by admin

InCarTec 27-317 SYNC 2 3 Reverse Camera Addon for Ford Transit Custom 2018 On

Mens / Womens Shavers. 27-317 Camera Add On Interface Adaptor for Ford. Reverse Camera input adaptor for Ford Sync 2 8 inch & Sync 3 systems. Enables connection of an aftermarket NTSC camera to the vehicles OEM screen. The Vehicle will need programming to enable the rear view camera function. The Adaptor has 54 pin male and female connectors with a RCA Phono camera input. Compatible with following vehicles. Car Make / Model. Note: The years stated refer to the model’s years of manufacture, please check the item description for information about any changes there may be within these productions years. The item “InCarTec 27-317 SYNC 2 3 Reverse Camera Addon for Ford Transit Custom 2018 On” is in sale since Friday, November 6, 2020. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “dynamicsounds00″ and is located in London. This item can be shipped worldwide.

Compatible Vehicle Make: Ford
Connectivity: Wired
Manufacturer Part Number: 27-317 TC
Brand: Incar Tec

Ford Transit Custom Sync3 Reversing Camera Kit (2018 Onwards) Brake Light

Posted on June 19, 2021 by admin

Ford Transit Custom Sync3 Reversing Camera Kit (2018 Onwards) Brake Light

Ford Transit Custom Sync3 Reversing Reverse Camera Kit (2018 Onwards) Brake Light. This is our Reversing Camera Kit for the Ford Transit Custom from 2018 Onwards. To check if you have Sync3 onscreen press Settings-General-About and the software page will be displayed. Sync3 will say Sync3 and a software version (the version is irrelevant). If you only see a software page with software beginning with the letter F or R then you have the newer Sync2.5 that this kit will NOT Fit! (Please see our other listing for the Sync 2.5 kit) This Plug and Play Kit comes with a T harness loom that plugs into the Sync unit fitted behind the glovebox. The Kit comes supplied with our replacement LED Brake Light Camera for the Left Rear Door. Simply plug the programmer into the vans OBD port under the drivers side of the dashboard and it will automatically code the Sync unit to activate the rear camera. This will then display the camera menu in the settings screen giving you the option of only having the camera in reverse gear or having a delay option, which will keep the camera image on the display until the van reaches 15 mph. The kit will not provide moving guidelines but if factory parking sensors are installed then they will show on the top right corner of the screen. Please See Our Product Video to Experience this Kit in Action. This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us. The item “Ford Transit Custom Sync3 Reversing Camera Kit (2018 Onwards) Brake Light” is in sale since Tuesday, February 19, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “empirical-in-car-technology” and is located in Glasgow. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

Compatible Vehicle Make: Ford
Type: Built-in Camera
Manufacturer Part Number: Does Not Apply
Placement on Vehicle: Front
Brand: EMPIRICAL IN CAR TECHNOLOGY

Ford Transit Custom & Tourneo Sync3 Reversing Camera Kit (2018 Onwards)

Posted on June 15, 2021 by admin

Ford Transit Custom & Tourneo Sync3 Reversing Camera Kit (2018 Onwards)

Ford Transit Custom & Tourneo Sync3 Reversing Reverse Camera Kit (2018 Onwards). This is our Reversing Camera Kit for the Ford Transit Custom & Tourneo from 2018 Onwards. To check if you have Sync3 onscreen press Settings-General-About and the software page will be displayed. Sync3 will say Sync3 and a software version (the version is irrelevant). If you only see a software page with software beginning with the letter F or R then you have the newer Sync2.5 that this kit will NOT Fit! (Please see our other listing for the Sync 2.5 kit). This Plug and Play Kit comes with a T harness loom that p lugs into the Sync unit fitted behind the glovebox. Our low voltage wedge style NTSC camera supplied, fits neatly at the side of the number plate plinth. Simply plug the programmer into the vans OBD port under the drivers side of the dashboard and it will automatically code the Sync unit to activate the rear camera. This will then display the camera menu in the settings screen giving you the option of only having the camera in reverse gear or having a delay option, which will keep the camera image on the display until the van reaches 15 mph. The kit will not provide moving guidelines but if factory parking sensors are installed then they will show on the top right corner of the screen. Please See Our Product Video to Experience this Kit in Action. This is why all of the photos you see within our product range are of the actual device we have fitted in use, as opposed to a stock or catalogue image. We only sell products and packages that we have fitted personally and this is why we are able to provide the in depth support and expert knowledge of the actual product, which our customers have come to expect from us. The item “Ford Transit Custom & Tourneo Sync3 Reversing Camera Kit (2018 Onwards)” is in sale since Thursday, August 1, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “empirical-in-car-technology” and is located in Glasgow. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

Compatible Vehicle Make: Ford
Type: Built-in Camera
Features: Marine/Waterproof
Manufacturer Part Number: Does Not Apply
Placement on Vehicle: Front
Brand: EMPIRICAL IN CAR TECHNOLOGY

7 Monitor & Reverse Rear View Camera Brake Light For Ford Transit Custom 16 On

Posted on November 26, 2020 by admin

7 Monitor & Reverse Rear View Camera Brake Light For Ford Transit Custom 16 On

7 TFT LCD Color Mirror Parking Monitor For Car Bus Rear View Reverse Camera. Universal Car Rear Reversing High Level Brake Light Camera 170° & 7 LCD Monitor. 170° Universal Car Rear View Reversing High Level Brake Light Camera 1/3 CMOS. 7 Monitor + Reversing Backup Rear View Camera w/ Brake Light For Ford Transit Custom 2016 on Specification of Rear View Camera: Material: ABS Color: Black + Red TV System: NTSC Sensor: 1/4 PC7070 CMOS Resolution: 480TVL Power Supply: DC12V ± 10 View Angle: 170° Night Vision: Yes Waterproof: IP68 Scanning System: 2:1 Interlace Sync System: Internal ADC:Auto BLC: Auto Mini Lumination: 0.5Lux / F1.2 (0 Lux with LED) Operating Temperature: -2070 RH 95 MAX Storage Temperature: -3080 RH 95 MAX Placement on vehicle: Rear Quantity: 1set Feature : Shockproof, IP68, anti-interference and resistance to high/low temperature. Super low-light, high quality image capabilities, high resolution, high sensitivity and high signal to noise ratio. High-definition and 170 degree wide viewing angle. This camera can give you a full sight of the back of your car when you are driving. Specification of Monitor: Color: Black Power: DC 12V-24V Visual Angle: 160° Screen Dimensions: 7.0 inch Screen Format: 16:9 Video: 2-channel video input;V1/V2 switch Screen/Monitor Type: 7 Inch TFT Color LCD Monitor Resolution: 480(W) X RGB X 234(H)=336960Pixels Power Supply: 7W / 12V Suitable for any vehicles, e. Car, truch, van, lorry, motorbike and so on System: PAL / NTSC Rear Watching: Image can be changed left and right Operate Mode: The Key operation and remote control Size: Approx 250x105x25mm DC Power cable length: 1.95m-2m Quantity: 1set Feature : 7TFT LED backlight full color display LCD screen monitor with high-resolution picture. With two AV input: AV1 connects to car DVD, VCR and other video equipment. AV2 to car backup camera. Support rotating the screen Easy to install. No Audio input or output. Support adjust the Brightness, contrast, color. Delicate design, stable performance, clear picture and excellent color effect. Comes with an IR remote controller for an easy operation. Working perfectly with Car DVD, VCD, camera, and other video equipment. Anti-glare bule mirror to make safer driving. Activities buckle: direct link with your original rearview mirror Fitment: For Ford Transit Custom 2016 on The compatibility just for reference, Please make sure the item fit for your vehicle. Package included : 1 x Camera 1 x Adaptor 1 x Video Extension Cable 1 x Power Supply Cable 1 x 7 monitor 1 x remote controller 1 x DC power cable 1 x English Instruction Note: 1. We provide clear pictures , measurement where possible. Please check as much as possible to make sure the item the one that you need. The actual item maybe has slight color distinct with listing image due to different computer screens , thanks for your understanding. The size of item is manual measurement, please allow 0.5-1inch difference. Instructions is included in this kit. We will provide help as much as possible. The item “7 Monitor & Reverse Rear View Camera Brake Light For Ford Transit Custom 16 On” is in sale since Thursday, March 14, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “unopery” and is located in Shenzhen. This item can be shipped worldwide.

MPN: WPd9865367
Brand: MATCC
Connectivity: Cable
Manufacturer Part Number: WPd9865367
Compatible Vehicle Make: Ford
Colour: Black, Red
Features: Marine/Waterproof, Night Vision
Custom Bundle: No
Placement on Vehicle: Rear
Standard: NTSC
Type: Reversing Camera
Coloured Camera: Yes
Reversing Camera Type: Colour Camera Kits
View Angle Rear View Camera: 170°
Sensor Rear View Camera: 1/4 PC7070 CMOS
Waterproof Rear View Camer: IP68
Screen Format Monitor: 16:9
Screen Dimensions Monitor: 7.0 inch
System Monitor: PAL / NTSC
Fitment: For Ford Transit Custom 2016 on

Ford Transit Custom 2016 IR LED Brake Light Parking Reverse Camera + 7 Monitor

Posted on August 25, 2020 by admin

Ford Transit Custom 2016 IR LED Brake Light Parking Reverse Camera + 7 Monitor

HID Kit By Bulb Fitment. HID Kit By Car Model. HID Conversion kits list cars. CISBO Parking Sensor Kit. 8 Meters sensor kit. QUANAN OEM PARKING SENSOR. Ford Transit Custom 2016 Onwards IR LED Brake Light Parking Reverse Camera + 7 Monitor. Ford Transit Custom 2016 Onwards Door Brake Light Rear Parking Reversing Camera. Night Vision Distance: 35ft. Operation Temp: -20 to 70+. 10 Meter AV Video Cable Included. Compatible with: Ford Transit Custom May 2016 Onwards (LED brake light bulb). Dimensions: 263 (Longest side) x 50mm. The monitor comes with dual video input i. V1 and V2, with V1 video as the default when the reverse gear is not engaged, once the reverse gear is engaged the monitor automatically switches to V2 video input. Switching between V1 and V2 inputs (when not reversing) can be done by pressing the V1/V2 button on the right side of display or using remote control key:’video select. The display automatically powers on when reverse gear is engaged, and if there is no video signal, the monitor can be turned on/off by pressing the power button. 1 x Ford Transit Custom Camera. 1 x 7 Monitor. 1 x 1.5m Power Supply Cable. 1 x RCA Adaptor Cable. 1 x 10m AV Video Extension Cable. This brake light camera is only be suitable for the Transit Custom May 2016 onwards with the LED brake light bulb. We are a genuine UK based VAT registered company established in 2006. Every item will be dispatched from our warehouse in Berkshire UK. Also you will have UK. Courier service only collect on Monday to Friday. Goods will be dispatched on Monday if customer pay courier service after 4pm on Friday. We will test the defective part and supply the replacement unit if the item is faulty and not damaged by force. Add to Favourite Sellers. A&E Trading Ltd is a VAT registered company established in 2006 with an aim to be the UK’s No. All of our items are dispatched from our warehouse in Berkshire, UK. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Ford Transit Custom 2016 IR LED Brake Light Parking Reverse Camera + 7 Monitor” is in sale since Wednesday, May 1, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “londoncolour” and is located in Slough, berkshire. This item can be shipped to all countries in Europe, United States, Canada, Australia.

Reversing Camera Type: Colour Camera Kits
Screen Size: 7″
Compatible Vehicle Make: Transit Custom 2016 Onwards
Camera Connection Type: Wired
Connectivity: Wired
Type: Mounted Camera
Features: Waterproof
Manufacturer Part Number: Does Not Apply
Placement on Vehicle: Rear
Brand: Quanan
Colour Camera: Yes

Wireless Ford Transit Custom 2016 LED Brake Light Reverse Camera+7 Dash Monitor

Posted on December 10, 2019 by admin

Wireless Ford Transit Custom 2016 LED Brake Light Reverse Camera+7 Dash Monitor

HID Kit By Bulb Fitment. HID Kit By Car Model. HID Conversion kits list cars. CISBO Parking Sensor Kit. 8 Meters sensor kit. QUANAN OEM PARKING SENSOR. Wireless Ford Transit Custom 2016 LED Brake Light Reverse Camera+7 Dash Monitor. Wireless Ford Transit Custom 2016 -2019 LED Brake Light Reverse Camera + 7 Dashboard Monitor. Night Vision Distance: 35ft. Operation Temp: -20 to 70+. Compatible with: Ford Transit Custom May 2016 Onwards (LED brake light bulb). Dimensions: 263 (Longest side) x 50mm. 100% Brand New, with 7 inch LED colour TFT LCD display monitor. Can be either mounted on the headrest or use the dashboard stand supplied. Equipped with 2 AV input. AV1 connects to car DVD, VCR and other video equipment, AV2 to car backup camera. Works perfectly with Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. When in reversing, the monitor will start up automatically, and synchronously. Display the video from rear view camera, and it will close itself after that. The brightness, contrast and colour can be adjusted. There are 2 ways to install: standing or mounting. Comes with an IR remote controller for a easy operation. Screen Size: 7 inch. Screen Ratio: 16:9/4:3. Resolution: 800 x 600 Pixels. Contrast Ratio: 100:1. Power Supply: DC 12V. Working Temperature: 0 80 degree. Storage Temperature: -10 80 degree. Product Dimensions (L x W x D): 193 x 135 x 25mm. 1 x Ford Transit Custom Camera. 1 x 7 Dashboard headrest monitor. 1 x 1.5m Power supply cable. 1 x RCA adaptor cable. 1 x Wireless transmitter and receiver. This brake light camera is only suitable for vehicles from May 2016 onwards with the LED brake light bulb. We are a genuine UK based VAT registered company established in 2006. Every item will be dispatched from our warehouse in Berkshire UK. Also you will have UK. Courier service only collect on Monday to Friday. Goods will be dispatched on Monday if customer pay courier service after 4pm on Friday. We will test the defective part and supply the replacement unit if the item is faulty and not damaged by force. Add to Favourite Sellers. A&E Trading Ltd is a VAT registered company established in 2006 with an aim to be the UK’s No. All of our items are dispatched from our warehouse in Berkshire, UK. View more great items. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Wireless Ford Transit Custom 2016 LED Brake Light Reverse Camera+7 Dash Monitor” is in sale since Thursday, May 9, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “londoncolour” and is located in Slough, berkshire. This item can be shipped to all countries in Europe, United States, Canada, Australia.

Camera Connection Type: Wired
Reversing Camera Type: Colour Camera Kits
Compatible Vehicle Make: Transit Custom 2016 onwards
Screen Size: 7″
Connectivity: Wireless
Type: Mounted Camera
Features: Waterproof
Manufacturer Part Number: Does Not Apply
Placement on Vehicle: Rear
Brand: Quanan
Colour Camera: Yes