Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van

Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van
Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van
Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van
Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van
Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van

Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van
This camera system fits. Mercedes-Benz Vito / Metris / Viano / Valente / V-Class / W447. Easy installation & factory like install. This backup camera is designed to replace your existing third brake light for a clean and factory-like installation. Top CMOS sensor, 600TV lines. Unlike other sellers that use cheap CMOS, our Vardsafe brake light backup camera uses top CMOS sensor and has a resolution of 600TV lines, which means you can get very good video image. Unlike traditional rear view camera that require you to drill holes on the roof of your vehicle to finish installation, this OEM fit camera only need you to replace the brake light in your vans with this camera for a perfect factory-like install. This backup Camera lens can be changed vertically if you need for best viewing angle. 12-24V wide voltage protection design. Most vehicles powered by 12V, but sometimes it actually run higher than 12V. In order to protect the camera from voltage fluctuation, it is designed with 12-24V. 1 X brake light reversing camera. 1 X 10 meters video extension cable. 1 X 1.5 meter power supply cable. 1 X RCA adapter. 1 X installation kit. We not guarantee or promise that the user will not be in an accident or otherwise not collide with an object. We are not responsible for consequential damages of any kind. Personal information collected is only used for customer contact, customer identification, order fulfillment. If we have difficulty processing an order, the contact information is used to get in touch with the customer. All information is fully protected by SSL encryption technology. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “altycan” and is located in this country: CN. This item can be shipped worldwide.
  • Camera Connection Type: Wired
  • TV system: PAL/NTSC compatible
  • Viewing angle: 120°
  • Model: VS381
  • Country/Region of Manufacture: China
  • Compatible Vehicle Make: Mercedes-Benz Metris Vans Vito Viano
  • Power Supply: 12V-24V
  • Operating Temperature: -30℃~+70℃
  • Voltage: DC 12V
  • Image Sensor: Top CMOS
  • Waterproof Rating: IP68
  • Resolution: 756(H) X 504(V)
  • Type: Rear View Camera Kit
  • TV line: 600TV lines
  • Camera type: Third Brake Light Backup Camera
  • Shell Material: Plastic
  • Brand: Unbranded

Brake Light Reverse Backup Camera for Mercedes-Benz Metris / Vito / Viano Van

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams
· Image Sensor: 1/3 OV Color CCD. · Effective Pixels: 628586. · Horizontal Resolution: 600TVL. · Minimum Illumination: 1.0Lux F=1.2 (0Lux with IR on). · Diagonal Viewing Angle: 170 degree optional. · Synchronization: Internal synchronization. · Signal to noise ratio: >48db. · Signal System: NTSC. · Electronic Shutter: Auto. · Video Output: RCA interface, 1.0Vp-p, 75Ohm. · White Balance: Auto. · Backlight Compensation: Auto. · Power: DC 12V. · Current Consumption: 50-60mA, Max 130mA with IR on. · Operating Temperature: -20°C +60°C, RH95% Max. · Storage Temperature: -30°C +80°C, RH95% Max. · CCD imaging sensor. · Support NTSC Video system. · High-definition and wide viewing angle. · Applicable to variety of Vehicles: car, truck, RV, mini-van etc. · Easy to install, you can install the monitor via mount holder or universal bracket. · 1x Car Rear View Camera. · 1x10m Video Cable. Adapter cable 4 pin to AV cinch. · 1x1m Power Cable. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “yixinfan2010″ and is located in this country: CN. This item can be shipped worldwide.
  • Camera Connection Type: Wired
  • Screen Display: LCD, TFT – LCD
  • Brand: Unbranded
  • Type: Reversing Camera
  • Compatible Vehicle Make: Ford
  • Model: Ford Transit

HD Car Rear View Camera For Ford Transit Custom Brake Light Reverse Parking Cams

Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200

Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200

Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200
CCD image sensor, 600TV lines. Unlike other sellers that use cheap CMOS, our tailgate handle backup camera uses CCD sensor and has a resolution of 600TV lines, which means you can get very good video image. Clip-on 7inch Mirror monitor. This 7 inch mirror monitor features clip on design, which attaches your existing rear view mirror with pressure clips without taking up room on your dash. I ts camera lens can be changed vertically so that you can get best viewing angle. The camera features 6 infra-red lights to provide vision even in the dark night. This camera has 170 degrees diagonal viewing angel, which is well above industry standard of 120 degrees. Unlike traditional backup cameras that need you to drill holes on the roof of your vehicle, this OEM brake light camera ONLY require you to replace the third brake light in your vehicle with this camera for a very clean install. At Vardsafe, your satisfaction is 100% guaranteed. 3rd brake light camera. 1 X 7 inch clip-on mirror monitor. 1 X 10 meters video extension cable. 1 X 1.5 meter power supply cable. 1 X kit for installation. We not guarantee or promise that the user will not be in an accident or otherwise not collide with an object. We are not responsible for consequential damages of any kind. Feedback is very important for us. How to get wholesale price from Vardsafe. Ltd specializes rear view camera and monitor safety solutions, our products maintain good reputation from customers in United States, Canada, and European countries. Located in Shenzhen, China, we are committed to provide top quality products at an affordable price. Vardsafe featured backup cameras & monitors at trade show. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “vardsafe” and is located in this country: CN.
  • Camera Connection Type: Wired
  • Image Sensor: CCD
  • Model: VS200K
  • Country/Region of Manufacture: China
  • Compatible Vehicle Make: Nissan NV200 /Chevrolet City Express
  • Screen Display: LCD
  • Resolution: 600TV lines
  • Night Vision: Yes
  • TV System: NTSC/PAL
  • Waterproof: IP68
  • Viewing Angle: 170°
  • Type: Rear View Camera Kit
  • MPN: Vardsafe VS200K
  • Brand: Vardsafe
  • Screen Size: 7\
  • UPC: 603097376647

Vardsafe Brake Light Rear View Reverse Backup Camera Kit for Nissan NV200

Brake Light Reverse Backup Camera &5” Rear View Mirror Monitor for Iveco Daily

Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily

Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily
Important : this camera fits new Iveco Daily (sixth generation) from 2014 to present models. Brake light replacement camera. This brake light reverse camera is designed to replace your existing brake light for a easy and factory-like install. Acts like regular reflective Rear View Mirror as well as a LCD monitor. This 5 inch replacement mirror display acts like regular reflective rear view mirror as well as a HD LCD monitor. Clip-on 5 inch Mirror monitor. This 5 inch mirror monitor features clip on design, which attaches your existing rear view mirror with pressure clips without taking up room on your dash. Top sensor, 600 TV lines. Unlike other sellers that use cheap CMOS, however, our Vardsafe backup camera uses top CMOS sensor and has a resolution of 600TV lines, which means you can get very good video image. This backup Camera lens can be changed vertically if you need for best viewing angle. 12-24V wide voltage protection design. Most vehicles powered by 12V, but sometimes it actually run higher than 12V. In order to protect the camera from voltage fluctuation, it is designed with 12-24V. 1 X brake light rear view. 1 X 5 inch TFT LCD rear view monitor. 1 X 10 meters extension cable. 1 X installation kit. We not guarantee or promise that the user will not be in an accident or otherwise not collide with an object. We are not responsible for consequential damages of any kind. Personal information collected is only used for customer contact, customer identification, order fulfillment. If we have difficulty processing an order, the contact information is used to get in touch with the customer. All information is fully protected by SSL encryption technology. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “altycan” and is located in this country: CN.
  • Camera Connection Type: Wired
  • Model: VS618C
  • Country/Region of Manufacture: China
  • Compatible Vehicle Make: Iveco Daily (2014 – current)
  • Screen Display: TFT – LCD
  • Viewing angle: 120°
  • Power Supply: 12V-24V
  • Type: Rear View Camera Kit
  • Operating Temperature: -30℃~+70℃
  • Resolution: 756(H) X 504(V)
  • Voltage: DC 12V
  • Image Sensor: Top CMOS
  • TV line: 600TV lines
  • Camera waterproof rating: IP68
  • TV system: PAL/NTSC compatible
  • Materials: Plastic
  • Monitor type available: Clip-on Mirror monitor
  • Camera type: Brake light replacement
  • Brand: Unbranded
  • Screen Size: 5\

Brake Light Reverse Backup Camera &5'' Rear View Mirror Monitor for Iveco Daily

Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter

Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter

Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter
Camera lens can be changed vertically if you need. CCD sensor, 600TV lines. Unlike other sellers that use cheap CMOS, our Vardsafe VS608 brake light backup camera uses CCD sensor and has a resolution of 600TV lines, which means you can get very good video image. The rear view camera features 6 infra-red lights to provide vision even in the dark night. Clip-on 7 inch Mirror monitor. This 7 inch mirror monitor features clip on design, which attaches your existing rear view mirror with pressure clips without taking up room on your dash. 12-24V wide voltage protection design. 1 X 10 meters video extension cable. 1 X 7 inch mirror monitor. 1 X kit for installation. We not guarantee or promise that the user will not be in an accident or otherwise not collide with an object. We are not responsible for consequential damages of any kind. Personal information collected is only used for customer contact, customer identification, order fulfillment. If we have difficulty processing an order, the contact information is used to get in touch with the customer. All information is fully protected by SSL encryption technology. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “altycan” and is located in this country: CN.
  • Camera Connection Type: Wired
  • Viewing angle: 120°
  • Model: VS608K
  • Country/Region of Manufacture: China
  • Compatible Vehicle Make: Mercedes-Benz Sprinter
  • Screen Display: TFT – LCD
  • Power Supply: 12V-24V
  • Operating Temperature: -30℃~+70℃
  • Resolution: 756(H) X 504(V)
  • Voltage: DC 12V
  • Image Sensor: CCD
  • TV line: 600TV lines
  • Type: Rear View Camera Kit
  • Camera waterproof rating: IP68
  • TV system: PAL/NTSC compatible
  • Brand: Unbranded
  • Screen Size: 7\

Brake Light Reverse Backup Camera Mirror Monitor For Mercedes Benz MB Sprinter

7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer

7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer

7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer
IPoster Car Truck Electronics & Free Return &. Lastbus Electronics, more than 10 Years manufaturing exprience in this field. Dear customers, We are always working hard to ensure that orders are delivered on time. But inevitably there will be a very small number of orders may be delayed due to the worsening of the epidemic. Thank you for your support! HD 7 Car Rear View Mirror Monitor WITH CLIP, EASY INSTALLING & built-in IR sensor for remote control + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer. Screen Size: 7 inch. Screen Ratio: 16:9/4:3. Viewing Angle: U/D90° L/R120°. Resolution : NTSC – 976×494 pixels / PAL – 976×596 pixels. Power Supply: DC 12V. Dimension: 24.5x11cm(LxW). Shockproof, IP68, anti-interference and resistance to high/low temperature. High quality image capabilities, high resolution, high sensitivity and high signal to noise ratio. High-definition and 170 degree wide viewing angle. This camera can give you a full sight of the back of your car when you are driving. 7 inch TFT-LED (16:9) wide screen. Universal clip on existing mirror. (DVD / camera / game). Design for in-car use only. Product Name: Rear View Camera. Camera Connection Type: Wired. Sensor:1/3 NVP CCD. Night Vision distance: Approx. View angle: 170 °. Resolution: N: 976×494 pixels P: 976×596 pixels. Operating temperature: -20 to +70. Minimum illumination: 0.1Lux LED ON. 26.2×5.2×7.3cm. Import chip, image color high-definition, more realistic. Viewing angle 170 ° large viewing range, reversing more secure. With reversing reference line (electronic scale line), the obstacle distance at a glance. Digital photographic chip processing, night vision effect is obvious. Multi-layer waterproof design, truly high pressure washing and soaking waterproof. Video line connected to the monitor, the power cord connected to the car taillight power, reversing, reversing the monitoring system automatically began to work, you can clearly see the car, the situation. For Citroen Jumper and so on. 1 x 7 Inch Monitor. 1 x Power Harness. 1 x Remote(No Battery Inside). 1 x Reversing Camera. 1 x 10m video cable. 1 x 1m power cable. 1 x 4PIN to RCA connector converter cable. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need. All dimensions are measured by hand, Please allow 0.5-1 inch difference due to manual measurement. The item “7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer” is in sale since Saturday, January 30, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “iposter” and is located in Glenfield. This item can be shipped to all countries in Europe, United States, Canada, Australia.
  • Brand: iPoster
  • Manufacturer Part Number: Does Not Apply
  • Compatible Vehicle Make: For Fiat Ducato Citroen Relay Peugeot Boxer
  • Placement on Vehicle: Rear
  • Connectivity: Wired
  • Features: Marine/Waterproof
  • Type: Rear View Camera Kit
  • Detection Angle: 170°
  • Colour: Red
  • Colour Camera: Yes
  • Country/Region of Manufacture: China
  • UPC: Does not apply
  • EAN: Does not apply
  • Camera Connection Type: Wired
  • Model: Rear View Camera
  • MPN: Does Not Apply
  • Screen Display: LCD
  • Screen Size: 7″

7 Monitor + Car Rear Brake Light Reversing Camera For Fiat Ducato Peugeot Boxer

Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor

Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor

Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor
Reversing Camera & Flip Monitor For Renault Traffic. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Min illumination:0Lux (LED ON). Image sensors: 1/3 color HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. 4.3 Flip Monitor Description. Screen Size: 4.3(16:9). Display Size: 4.3. Item Size: Approx 13.4 11.2 2.5cm / 5.28 4.41 0.98in. Material Type: ABS plastic. Item Weight: 340 g. Please note that the image cannot be flipped on this monitor so it cannot be fitted upside down. Installation tips:Two-way video inputs will display a black screen when no there is no signal. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1). Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Folding design enables the monitor to close out of sight to protect against thieves. Brake light reversing camera. 4.3 Flip Monitor. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connection. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: Unbranded

Renault Traffic 2001 2014 Brake Light Reversing Camera Backup & Flip Monitor

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19
Reversing Camera & 7 Monitor For Transit Custom. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “FORD TRANSIT CUSTOM REVERSING CAMERA & 7 MONITOR BACK UP BRAKE LIGHT 14 19″ is in sale since Friday, December 28, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: Unbranded

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup
Reversing Camera & 7 Monitor For Vauxhall Vivaro. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Min illumination:0Lux (LED ON). Image sensors: 1/3 color HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: Unbranded

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light
Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light
Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light
Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light
Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light
Add To Favourite Sellers. We are available to answer questions. Safe & Secure Payments. A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse (when wired correctly). Thanks to our RVC technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety. The high level brake lights with the built in rear view camera is a great piece of kit and will simply replace your existing 3rd brake light for easy installation. This bespoke nature of the camera is designed specifically for use with the vehicles on the fitment list. Its unique design means that no holes whatsoever need to be drilled! It will simply replace your existing 3rd brake light. This camera has been designed to replicate the size and shape of the existing high level brake light but with a discrete inbuilt camera. Our Direct Fit by Audio Tech Direct reverse cameras are simply amazing and offer many new technologies that make manoeuvring your vehicle easier and safer. Replaces The Brake Light. PLEASE NOTE: The rear view camera system runs on a +12v system. Some models with CANBUS have voltage drops on the reverse bulb power (for bulb out warnings on the dash). In such cases, a relay would be required with the camera. We have this available with part number CBS-CAMRELAY. The relay is not supplied with the camera. Bespoke design, retains the functionality of a 3rd brake light but with a high definition high level view reversing camera. Convenient RCA output means this camera can be used with any after-market monitor that will accept this cameras video signal. Your head unit or monitor will also require a CAM-In RCA connection. This will NOT work directly with any factory fitted monitors or head units. You will require an interface (if available) adaptor for a factory head unit to accept an after-market rear view camera. Replaces the high level brake light directly. Specially manufactured to replace the existing 3rd brake light, allowing for easy installation without the need for drilling or modification. The product will also retain the normal standard functionality of a boot handle too. Whilst we try and make every effort to make the fitment list as accurate as we can, we cannot cover all variants of each application. It is up to you, the customer, to ensure you double check that the item matches the existing space on the vehicle and also that the product that the camera will connect to will be able to connect and function with the head unit or monitor. DESIGNED TO FIT TO. Mercedes-Benz Vito W447 (2014-On) TAILGATE LIFT ONLY. NOTE: This vehicle list is a guide only. Camera Cable Length: 152cm. Camera Extension Cable Length: 6m. Power Requirement: 12V DC. Image Sensors: 1/3 Colour Sharp CCD. Working Power (DCV): 12V. Audio Tech Direct Ltd has grown into one of the UKs largest authorised car audio, mobile and tech internet dealers, with thousands of satisfied online customers. We are all about trying to bring the best and most contemporary products available. We specialise mainly in the In Car Entertainment area, we offer a huge range of car stereos from single DIN units, double DIN units and car specific units plus a range of stereo accessories such as reversing cameras and media cables. In fact, we are the UK’s largest supplier of OEM-style fit head units with over 100 types to choose from and we are also the UK’s largest supplier of reversing cameras, with over 80 different variants to choose from. We are very passionate about our business and we spent months vetting our complete product range to make sure only the very best items made it onto our shelves and finally onto you. Our after sale support is second to none. Plus should an item ever need to come back to us for any reason then it will come back to a UK address and also be inspected by one of our in-house technicians. Overall, we offer excellent support and a stress-free UK retailer experience. From our head office facility in Shropshire, our dedicated team provide sales, marketing, technical and after sales service for all here for you. Orders are processed seamlessly throughout the day and our sophisticated despatch system utilises the latest technology to ensure the right products are released on time quickly and efficiently. We are based here in the UK, with a UK company number and VAT number. We have various UK warehouses; including large warehouses in Middlesex, Yorkshire & Hampshire plus a smaller one at our head office in Shropshire. We also have a worldwide warehouse operation with warehouses also located in Australia, Hong Kong (factory), USA & Germany so no matter where in the world you are, we can offer something for you. Please note that Availability DOES NOT indicate the amount of time it will take for an item or order to reach the customer. These are the Availability statuses that you will find on our product pages. Out of Stock: This item is not in stock and is not currently available from our suppliers. If we happen to be out of stock in the UK then we will check stock at our German warehouse and then other warehouses from there onwards to make sure we can get the item to you in the time frame suggested. If for any reason we need to send from an overseas warehouse we absorb the cost to get it to you in the time-frame listed. You will NEVER be charged Duty or VAT to receive any items from us. We try and inform you for the courier used on the listing page. We have many warehouses across the UK so you may find if your order two or more different products then they could possibly be dispatched separately. The items will arrive on the service specified for each item. Whether your item has developed a fault, is damaged or is no longer required, we can help you out. UNWANTED / NOT REQUIRED PRODUCTS. This can be the sales receipt, a bank statement or an online sales invoice. They must include all original packaging, be in as new condition and must not have been used, installed or had any data input on them. In all cases we reserve the right to inspect the product and verify the fault. We do not cover faults caused by accident, neglect, misuse or normal wear and tear. If you unpack your product and find it damaged, please let us know as soon as possible and please validate the claim of damage by supplying a picture of both the damaged contents and the parcel box it arrived in. We will assess the claim and resolve promptly. We will then arrange for your item to be repaired or replaced with a new product or provide details of the manufacturers local service centre. We are not responsible for installation costs under any circumstance. We strongly advise you to take care when returning items to us; for example, by ensuring the goods are correctly addressed & adequately packaged. Items that arrive back damaged or destroyed as a result of poor packaging will not be accepted. These items will be resent to the customer at the customer’s expense. If you have received a faulty or incorrect item: You must notify us within 10 days of receipt, we will then arrange to replace or repair the unit. This guarantee does not cover effects arising from accidental damage or misuse of the items, and is automatically lost if the item is opened by non-qualified or unauthorised people. Please note that minor issues may be resolved by supplying replacement parts or alternative solutions acceptable to both parties. Based on the manufacturers’ opinion, we will repair, (or at our sole option) replace such Goods with the same or superior Goods, without charge or not provide any of the aforementioned. Before returning any goods please read our Terms and Conditions. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Upon receipt, all products will be inspected and at our discretion, credit may be refused. Any damages must be reported to us within 24 hours for us to raise any claims with our courier. Any claims after 24 hours will be dismissed for a claim. Certain products are treated specially for legal and/or health and safety reasons, It is important for your own and our couriers safety that they are followed. As well as the above procedures the below must also be adhered to. The item “Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light” is in sale since Monday, March 8, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “audiotechdirect” and is located in Oswestry, Shropshire. This item can be shipped to all countries in Europe, United States, Canada, Australia, New Zealand.
  • Colour: Red
  • Compatible Vehicle Make: Mercedes-Benz
  • Type: Built-in Camera
  • System Standard: NTSC
  • Brand: Direct Fit
  • Connectivity: Wired
  • Features: Marine/Waterproof
  • Manufacturer Part Number: CBS-BL7SN
  • Placement on Vehicle: Rear
  • Colour Camera: Yes

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light