Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Posted on December 14, 2021 by admin

Ford Transit Custom Reversing Camera & 7 Monitor Back Up Brake Light 14 19

Reversing Camera & 7 Monitor For Transit Custom. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “FORD TRANSIT CUSTOM REVERSING CAMERA & 7 MONITOR BACK UP BRAKE LIGHT 14 19″ is in sale since Friday, December 28, 2018. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup

Posted on November 18, 2021 by admin

Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup

Reversing Camera & 7 Monitor For Vauxhall Vivaro. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Min illumination:0Lux (LED ON). Image sensors: 1/3 color HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Vauxhall Vivaro 2001 2014 Brake Light Reversing Camera & 7 Monitor Backup” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Sprinter 3rd Brake Stop + Rear View Camera for Mercedes 2007 2017 9068200456

Posted on November 18, 2021 by admin

Sprinter 3rd Brake Stop + Rear View Camera for Mercedes 2007 2017 9068200456

For full item description. Auto Parts and Supplies. Body Electrical & Body Trim. Injectors and Fuel Rail Parts. Suspension and Drive Shaft. 3rd Brake Stop Lamp + Rear View Camera Mercedes Dodge Sprinter 2007+ 9068200456. 3rd Brake Stop Lamp With OUT Socket + Rear View Camera. Fits the following vehicles. Mercedes Sprinter 2007 – 2017. Dodge Sprinter 2007 – 2009. Freightliner Sprinter 2007 – 2017. Description: Chip: SONY 4140+673 TV System: PAL System Lens angel :120 degree Waterproof: IP68 Horizontal Resolution: 700TVL Night Vision function: 6pcs LED lamp Material: ABS Plastic Voltage: DC9V-12V±0.5V Size: Show as the picture Video Cable Length: approx. 6m Power Cable Length: approx. 152cm Distance between two holes: approx. 30.7cm Perfect to replace your old or broken camera. Package includes: 1 x Reversing Camera 1 x Video cable 1 x Power cable 1 x Sticker. View more great items. Whatever is easiest and most convenient for you we will accommodate. Sprinter Supplier is truly passionate about Sprinters and our customers. Our service is unmatched because we put our customers needs first. TRACKED AND INSURED packages. Our warehouse is full of spare Sprinter parts, both genuine and aftermarket. If you see something missing from our catalog give us a call and we will source it from a dealer for you at a 20% discount off their retail price. We are here and happy to help! Sprinter Supplier LLC spare parts are certified by TUV with certificate number: 12 300 0617 and proof has been furnished that the requirements according to: TS EN ISO 9001: 2008 are fulfilled. The use of Sprinter Supplier parts and components may impact the performance characteristics of other systems of the vehicle. When operating properly, Sprinter Supplier performance engines, performance parts and components have the potential to adversely impact other systems of the vehicle. Such damage is the sole responsibility of the consumer and is not covered. Consumers are solely and completely responsible for evaluating their vehicle to ensure that the vehicle, and each part of that vehicle, is appropriate for this part or component. It is the consumer? S sole responsibility to have the parts properly installed on their vehicle along with any modifications necessary for the proper performance of the vehicle. Vehicle damage caused by a consumer? S failure to modify the vehicle properly for use of one or more Sprinter Supplier LLC parts and components is not covered and is the sole responsibility of the consumer; where the vehicle has been damaged due to a consumer? S failure to modify the vehicle properly as necessary for use of Sprinter Supplier LLC parts and components. All Sprinter Supplier LLC parts are aftermarket parts. Sprinter Supplier LLC are not Genuine Mercedes, Dodge or Frieghtliner Parts. Therefore, they may not be used in any application that requires the use of Genuine Mercedes, Dodge or Frieghtliner Parts. In no event shall the liability of Sprinter Supplier LLC, whether in tort, contract or otherwise, exceed the cost of the part or vehicle. All associated medical costs and injuries to person(s) or people are not in anyway connected to Sprinter Supplier LLC. No vehicle or part in this catalog or offering is street legal or certified under federal motor vehicle safety standards and regulations. Vehicles and parts that are not street legal or certified under federal motor vehicle safety standards and regulations are neither intended nor certified for use on public roads. Many of the parts in this catalog are not designed or tested for crashworthiness or to meet the safety needs of the motoring public. The spare parts could conceivably be combined in an infinite combination, and the use of some parts on some vehicles could adversely affect the performance of the vehicle or other replacement or original parts. Please keep the original packaging! Items must be received in the same condition they arrived to you. Packaging is important as we will have to restock these items. Add to Favorite Sellers. Sign up to Newsletter. Side Marker Lamp Lights Dodge Mercedes Sprinter OEM 2007+ BG82084. Rear View Camera 3rd Brake Light for Reversing fits Mercedes Sprinter & Dodge. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “Sprinter 3rd Brake Stop + Rear View Camera for Mercedes 2007 2017 9068200456″ is in sale since Saturday, August 25, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Lighting & Lamps\Other Lighting & Lamps”. The seller is “sprintersupplier” and is located in Philadelphia, Pennsylvania. This item can be shipped to United States.

Modified Item: No
Custom Bundle: No
Interchange Part Number: 68012885AA 068012885AA A 906 820 04 56
2007 2008 2009 2010 2011 2012 2013 2014: 2015 2016 2017 2018
Manufacturer Part Number: 9068200456 A9068200456
Placement on Vehicle: Rear
Brand: AFM
Non-Domestic Product: No

Incoming search terms:

https://rearviewvideocamera net/2021/11/sprinter-3rd-brake-stop-rear-view-camera-for-mercedes-2007-2017-9068200456/

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light

Posted on October 23, 2021 by admin

Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light

Add To Favourite Sellers. We are available to answer questions. Safe & Secure Payments. A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse (when wired correctly). Thanks to our RVC technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety. The high level brake lights with the built in rear view camera is a great piece of kit and will simply replace your existing 3rd brake light for easy installation. This bespoke nature of the camera is designed specifically for use with the vehicles on the fitment list. Its unique design means that no holes whatsoever need to be drilled! It will simply replace your existing 3rd brake light. This camera has been designed to replicate the size and shape of the existing high level brake light but with a discrete inbuilt camera. Our Direct Fit by Audio Tech Direct reverse cameras are simply amazing and offer many new technologies that make manoeuvring your vehicle easier and safer. Replaces The Brake Light. PLEASE NOTE: The rear view camera system runs on a +12v system. Some models with CANBUS have voltage drops on the reverse bulb power (for bulb out warnings on the dash). In such cases, a relay would be required with the camera. We have this available with part number CBS-CAMRELAY. The relay is not supplied with the camera. Bespoke design, retains the functionality of a 3rd brake light but with a high definition high level view reversing camera. Convenient RCA output means this camera can be used with any after-market monitor that will accept this cameras video signal. Your head unit or monitor will also require a CAM-In RCA connection. This will NOT work directly with any factory fitted monitors or head units. You will require an interface (if available) adaptor for a factory head unit to accept an after-market rear view camera. Replaces the high level brake light directly. Specially manufactured to replace the existing 3rd brake light, allowing for easy installation without the need for drilling or modification. The product will also retain the normal standard functionality of a boot handle too. Whilst we try and make every effort to make the fitment list as accurate as we can, we cannot cover all variants of each application. It is up to you, the customer, to ensure you double check that the item matches the existing space on the vehicle and also that the product that the camera will connect to will be able to connect and function with the head unit or monitor. DESIGNED TO FIT TO. Mercedes-Benz Vito W447 (2014-On) TAILGATE LIFT ONLY. NOTE: This vehicle list is a guide only. Camera Cable Length: 152cm. Camera Extension Cable Length: 6m. Power Requirement: 12V DC. Image Sensors: 1/3 Colour Sharp CCD. Working Power (DCV): 12V. Audio Tech Direct Ltd has grown into one of the UKs largest authorised car audio, mobile and tech internet dealers, with thousands of satisfied online customers. We are all about trying to bring the best and most contemporary products available. We specialise mainly in the In Car Entertainment area, we offer a huge range of car stereos from single DIN units, double DIN units and car specific units plus a range of stereo accessories such as reversing cameras and media cables. In fact, we are the UK’s largest supplier of OEM-style fit head units with over 100 types to choose from and we are also the UK’s largest supplier of reversing cameras, with over 80 different variants to choose from. We are very passionate about our business and we spent months vetting our complete product range to make sure only the very best items made it onto our shelves and finally onto you. Our after sale support is second to none. Plus should an item ever need to come back to us for any reason then it will come back to a UK address and also be inspected by one of our in-house technicians. Overall, we offer excellent support and a stress-free UK retailer experience. From our head office facility in Shropshire, our dedicated team provide sales, marketing, technical and after sales service for all here for you. Orders are processed seamlessly throughout the day and our sophisticated despatch system utilises the latest technology to ensure the right products are released on time quickly and efficiently. We are based here in the UK, with a UK company number and VAT number. We have various UK warehouses; including large warehouses in Middlesex, Yorkshire & Hampshire plus a smaller one at our head office in Shropshire. We also have a worldwide warehouse operation with warehouses also located in Australia, Hong Kong (factory), USA & Germany so no matter where in the world you are, we can offer something for you. Please note that Availability DOES NOT indicate the amount of time it will take for an item or order to reach the customer. These are the Availability statuses that you will find on our product pages. Out of Stock: This item is not in stock and is not currently available from our suppliers. If we happen to be out of stock in the UK then we will check stock at our German warehouse and then other warehouses from there onwards to make sure we can get the item to you in the time frame suggested. If for any reason we need to send from an overseas warehouse we absorb the cost to get it to you in the time-frame listed. You will NEVER be charged Duty or VAT to receive any items from us. We try and inform you for the courier used on the listing page. We have many warehouses across the UK so you may find if your order two or more different products then they could possibly be dispatched separately. The items will arrive on the service specified for each item. Whether your item has developed a fault, is damaged or is no longer required, we can help you out. UNWANTED / NOT REQUIRED PRODUCTS. This can be the sales receipt, a bank statement or an online sales invoice. They must include all original packaging, be in as new condition and must not have been used, installed or had any data input on them. In all cases we reserve the right to inspect the product and verify the fault. We do not cover faults caused by accident, neglect, misuse or normal wear and tear. If you unpack your product and find it damaged, please let us know as soon as possible and please validate the claim of damage by supplying a picture of both the damaged contents and the parcel box it arrived in. We will assess the claim and resolve promptly. We will then arrange for your item to be repaired or replaced with a new product or provide details of the manufacturers local service centre. We are not responsible for installation costs under any circumstance. We strongly advise you to take care when returning items to us; for example, by ensuring the goods are correctly addressed & adequately packaged. Items that arrive back damaged or destroyed as a result of poor packaging will not be accepted. These items will be resent to the customer at the customer’s expense. If you have received a faulty or incorrect item: You must notify us within 10 days of receipt, we will then arrange to replace or repair the unit. This guarantee does not cover effects arising from accidental damage or misuse of the items, and is automatically lost if the item is opened by non-qualified or unauthorised people. Please note that minor issues may be resolved by supplying replacement parts or alternative solutions acceptable to both parties. Based on the manufacturers’ opinion, we will repair, (or at our sole option) replace such Goods with the same or superior Goods, without charge or not provide any of the aforementioned. Before returning any goods please read our Terms and Conditions. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. Upon receipt, all products will be inspected and at our discretion, credit may be refused. Any damages must be reported to us within 24 hours for us to raise any claims with our courier. Any claims after 24 hours will be dismissed for a claim. Certain products are treated specially for legal and/or health and safety reasons, It is important for your own and our couriers safety that they are followed. As well as the above procedures the below must also be adhered to. The item “Reversing Reverse Camera For Mercedes Benz Vito W447 2014-2018 High Brake Light” is in sale since Monday, March 8, 2021. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Parking Cameras”. The seller is “audiotechdirect” and is located in Oswestry, Shropshire. This item can be shipped to all countries in Europe, United States, Canada, Australia, New Zealand.

Colour: Red
Compatible Vehicle Make: Mercedes-Benz
Type: Built-in Camera
System Standard: NTSC
Brand: Direct Fit
Connectivity: Wired
Features: Marine/Waterproof
Manufacturer Part Number: CBS-BL7SN
Placement on Vehicle: Rear
Colour Camera: Yes

Mercedes Sprinter/VW Crafter Rear Brake Light Sony CCD Reversing Camera Kit

Posted on October 14, 2021 by admin

Mercedes Sprinter/VW Crafter Rear Brake Light Sony CCD Reversing Camera Kit

Mercedes Sprinter/VW Crafter Brake Light Sony CCD Reversing Camera Kit. CAMERA: 1/3 Sony CCD, 700TVL camera in a Mercedes Sprinter, VW Crafter high level brake light lens. It has a 120 degree lens, 9 LEDs for good night vision and is waterproof to IP 68 standard. It has RCA Phono connectors. The monitor is a 7 TFT LCD dash mounting colour monitor with stand and remote control. CABLE: 10 meters approx. 33ft of video cable is included. What’s in the box. 1 x High level brake light Sony CCD camera. 1 x 7 Dash mount monitor with stand and remote contol. 1 x 10 meter video cable with RCA/Phono connectors 2 x 12v power lead. It is your responsibility to pack the item securely to make sure it arrives back here in good condition. If you believe we have delivered what we advertised and in a timely manner, then please leave 5 star positive. Because this is what we are striving for. The item “Mercedes Sprinter/VW Crafter Rear Brake Light Sony CCD Reversing Camera Kit” is in sale since Monday, July 28, 2014. This item is in the category “Vehicle Parts & Accessories\Car Parts & Accessories\Advanced Driver Assistance Systems\Parking Assistance\Camera, Monitor & Sensor Kits”. The seller is “drw7246″ and is located in Kidderminster. This item can be shipped worldwide.

Brand: DRW Electronics
Reversing Camera Type: Colour Camera Kits
Camera Connection Type: Wired
Manufacturer Part Number: RVS-27
Features: Waterproof
Screen Size: 7″
Compatible Vehicle Make: Mercedes Sprinter, VW Crafter
Placement on Vehicle: Rear
Colour Camera: Yes
Camera Type: Brake light camera
Monitor Type: Standalone Monitor
Connectivity: Wired
Detection Angle: 120°

Vauxhall Movano Reversing Camera Brake Light & 7” Monitor 2010 on Reverse Cam

Posted on October 10, 2021 by admin

Vauxhall Movano Reversing Camera Brake Light & 7'' Monitor 2010 on Reverse Cam

Vauxhall Movano Reversing Camera & 7 Monitor. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 color HD CMOS/CCD. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Power Consumption: Around 8W. Contrast Ratio: 100:1. Screen: Colour 7 LCD TFT. Item Size: Approx 19513525mm (LWD). Material Type: ABS plastic. Item Weight: 379 g. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1)Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Installation tips:Two-way video inputs will display a black screen when no there is no signal. Please note screen can be rotated if you wish to mount upside down. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Vauxhall Movano Reversing Camera Brake Light & 7” Monitor 2010 on Reverse Cam” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Non-Domestic Product: No
Modified Item: No
Compatible Vehicle Make: Nissan
Custom Bundle: No
Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Renault Master Reversing Camera Brake Light & 4.3” Flip Monitor 2010 On Reverse

Posted on September 14, 2021 by admin

Renault Master Reversing Camera Brake Light & 4.3'' Flip Monitor 2010 On Reverse

Reversing Camera & 4.3 Flip Monitor For Renault Master. Please note this is an aftermarket part designed to fit Renault Master. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS/CCD. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. 4.3 Flip Monitor Description. Screen Size: 4.3(16:9). Display Size: 4.3. Item Size: Approx 13.4 11.2 2.5cm / 5.28 4.41 0.98in. Material Type: ABS plastic. Item Weight: 340 g. Please note that the image cannot be flipped on this monitor so it cannot be fitted upside down. Installation tips:Two-way video inputs will display a black screen when no there is no signal. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1). Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Folding design enables the monitor to close out of sight to protect against thieves. Brake light reversing camera. 4.3 Flip Monitor. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Renault Master Reversing Camera Brake Light & 4.3” Flip Monitor 2010 On Reverse” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Non-Domestic Product: No
Modified Item: No
Compatible Vehicle Make: Nissan
Custom Bundle: No
Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Ford Transit Custom Reversing Camera & Mirror Monitor Brake Light 2014 2019

Posted on August 28, 2021 by admin

Ford Transit Custom Reversing Camera & Mirror Monitor Brake Light 2014 2019

Reversing Camera & Mirror Monitor For Transit Custom. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Full colour LED backlight display. With 2 video input: White video cable connects to car rearview camera, yellow one to other video equipment. Parking rearview priority: The monitor will start up automatically display the video from rearview camera when you are reversing and then close itself afterwards. Supports Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. With menu buttons, Brightness/contrast/hue/saturation/language (Chinese/English/Spanish) adjustable. No Audio input or output. Please note: This monitor is used to clip over an existing mirror. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connection. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “FORD TRANSIT CUSTOM REVERSING CAMERA & MIRROR MONITOR BRAKE LIGHT 2014 2019″ is in sale since Thursday, January 31, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Vauxhall Vivaro Reversing Camera & 4.3 Flip Monitor 3rd Brake Light 2014 On

Posted on August 25, 2021 by admin

Vauxhall Vivaro Reversing Camera & 4.3 Flip Monitor 3rd Brake Light 2014 On

Reversing Camera & 4.3 Flip Monitor For Vauxhall Vivaro. Please note this is an aftermarket part designed to fit Vauxhall Vivaro vans from years 2014 Onwards. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 colour HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. 4.3 Flip Monitor Description. Screen Size: 4.3(16:9). Display Size: 4.3. Item Size: Approx 13.4 11.2 2.5cm / 5.28 4.41 0.98in. Material Type: ABS plastic. Item Weight: 340 g. Please note that the image cannot be flipped on this monitor so it cannot be fitted upside down. Installation tips:Two-way video inputs will display a black screen when no there is no signal. 2-channel video input:V1/ V2 auto switching(V1 display first). Note: Please Connect the Rearview camera’s video cable with LCD’s yellow cable (Video V1). Then the LCD will show Camera’s video when you are Reversing, and stop playing movie (auto switching). Folding design enables the monitor to close out of sight to protect against thieves. Brake light reversing camera. 4.3 Flip Monitor. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Vauxhall Vivaro Reversing Camera & 4.3 Flip Monitor 3rd Brake Light 2014 On” is in sale since Wednesday, February 27, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Camera Connection Type: Wired
Reversing Camera Type: Colour Camera Kits
Non-Domestic Product: No
Modified Item: No
Compatible Vehicle Make: Renault
Custom Bundle: No
Manufacturer Part Number: Does Not Apply
Brand: Unbranded

Vauxhall Vivaro Reversing Camera & Rear View Monitor Brake Light 2014 Present

Posted on August 24, 2021 by admin

Vauxhall Vivaro Reversing Camera & Rear View Monitor Brake Light 2014 Present

Reversing Camera & Mirror Monitor For Vauxhall Vivaro. Please note this is an aftermarket part designed to fit Vauxhall Vivaro vans from years 2014 Onwards. This camera is designed to replace the 3rd brake light situated on the rear of the vehicle. Please note this listing comes with everything required to install this system. The old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle. Please see the instructions below to see installations instructions. Cable Length – 10 Meters. Min illumination:0Lux (LED ON). Image sensors: 1/3 color HD CMOS. Perfect IR night vision, 8 pcs IR LED. Night Vision distance:30ft. White Balance: Auto, Video Colour: Colourful. Effective Pixels : 756(H)504(V). Pixel Resolution : 600TV lines. Video Output: 1.0Vp-p, 75. S/N ratio: Better Than 48db. Operation Temperature: -20°C+70°C RH95%. Storage Temperature: -40°C+100°C RH95%. Working Power (DC): 12V/1,5. Watt Current consumption: 90mA Max. Video cable is RCA connector. Full colour LED backlight display. With 2 video input: White video cable connects to car rearview camera, yellow one to other video equipment. Parking rearview priority: The monitor will start up automatically display the video from rearview camera when you are reversing and then close itself afterwards. Supports Car DVD, VCD, camera, STB, satellite receiver, and other video equipment. With menu buttons, Brightness/contrast/hue/saturation/language (Chinese/English/Spanish) adjustable. No Audio input or output. Please note: This monitor is used to clip over an existing mirror. Brake light reversing camera. 10 meter 4 pin extension cable. Male to Male connection. 4 Pin accessory Cable. 12v Power adaptor for camera. 12v Power adapter for Monitor. Please refer to the diagram for reference which can be found in the in images for this listing. We recommend before installing the product in place test everything to check that it works. First thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by. Using the wire signal coming from when reverse is engaged. Using the reverse gear signal wire on the loom for an aftermarket stereo. Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle. This power source can be used for the camera. (1) and the monitor (7) should you want them both to turn on only when reverse is engaged. Below is a description of each wire. (1) Red – 12v power supply. (2) Black – Ground. (3) Yellow – CameraCamera side wiring. (4) Red – Positive from existing brake light. (5) Black – Ground from existing brake light. (6) 4 pin connectionMonitor wires. (7) Red – 12v power supply (fused) Can use same power feed as camera. 8 Black – Ground. (9) Yellow – Av source 1 (Camera). (10) White – Av source 2 (DVD player or Dash cam). (11) Male to Male Av connector Used to connect cables (3) & (9) together. If the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom. Ideally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust. Should you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched. The Stock house is a small business where you will find great products at bargain prices. We specialise in getting you the products you want when you need them. Stocking a wide range of products we are dedicated to giving you a good customer service. We hope you enjoy your shopping experience and we look forward to welcoming you back soon. We aim to answer all questions within 24 hours, excluding weekends and holidays. The item “Vauxhall Vivaro Reversing Camera & Rear View Monitor Brake Light 2014 Present” is in sale since Monday, May 21, 2018. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “the-stock-house” and is located in caerphilly, Caerphilly. This item can be shipped worldwide.

Non-Domestic Product: No
Modified Item: No
Compatible Vehicle Make: Renault
Custom Bundle: No
Manufacturer Part Number: Does Not Apply
Brand: Unbranded