7 INCHES WIRED SINGLE VIEW MONITOR X1 B. AHD 1080P WATERPROOF CAMERA X1 C. 15METERS EXTENSION CABLE X1 D. MONITOR POWER CABLE X1 MONITOR SPECIFICATION: 7 Inch Wired Color Single View AHD monitor Resolution: 1080P TV System: NTSC/PAL Multiple menu languages Brightness;450cd/m2 Support 3 cameras video input Separate trigger control wires forAV1, AV2, AV3. Menu to set up reversing image delay time 0-15s, mirrorrmal image. Monitor will automatic switch-over the image to related camera and back to the original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera image, Trigger end after shutdown Working voltage: DC10V to 36V Keys with LED backlit Built-in short-circuit protectorWhen installing and connecting the kit, people connects the female 4 pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a shortcut, the builtin protector may keep the monitor away from being burnt. ? Guide line appears when it is set as ON and monitor is triggered by the trigger wire CAMERA SPECIFICATIONS: sensor: AHD 1080P Video format:NTSC optional Lens:2.5mm Lens Angle: 120 degree Infrared LED light: 18PCS IR Distance:35ft Waterproof Rate:IP69K, Housing:aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention [APPLICATIONS]This is an upgraded industrial grade WIRED one camera system. [SINGLE VIEW MONITOR]A 7 LCD AHD 1080P color monitor (NOT SPLIT SCREEN, so the full/split/quad view buttons don’t work) with U-type metal bracket. This monitor is not waterproof. It is compatible with most of the vehicles with a free power input range DC10-36V and supports with max 3 cameras. TVS device is built in to protect the monitor from being damaged by the transient high power of vehicles. And this monitor only supplies camera which is in use with DC12V, it saves energy. [HEAVY DUTY CAMERA] It is a color AHD 1080P camera. It provides clear and color image, and no delay. The viewing angle is 120 degree. The buttons have automatic LED backlight, drivers can operate exactly at night. Monitor has a built-in protector for protecting monitor from being damaged by power polarities reversed. With built-in innovative system previous option settings memory even after it’s turned off. Camera’s image can be set as mirror, non-mirror or up-side-down by OSD menu. Turn the distance grid line on by menu, then connect trigger wire to power, it will show. Monitor has 3 trigger wires. Monitor will be triggered to turn on automatically to display camera image when reversing. After reversing, the monitor will be back to the pervious mode. This system has two viewing options(view when reverse or remain on continuously). We uses waterproof Aviation 4-pin screw connectors, NO BNC/RCA. Why power/av/m/-+ buttons not work? —Disconnect the trigger wire, it will work. Trigger wire needs to be connected to power of rear lamp. The full/split/quad view buttons from the right of the monitor don’t work? As a non-quad monitor, these three buttons no need to work. Distance grid/guide line don’t show? Firstly turn it on by menu on one of the channels, e. AHD1, and connect trigger wire 1 to power +, then the grid line will show on screen. Where to connect the triger wire? The trigger wire determines the operation of the monitor. The default installation is to connect this to the positive side of the reverse light. By doing so, the monitor will start displaying video once the gear is in reverse. For manual operation, just keep this disconnected. [Customer Service]When you recieve the item and find the item defective, missing parts, not working or don’t know how to connect the wires, please don’t worry, the first best step is to turn to our team via the Amazon Message immediately. We are keeping our eye on all the messages from our customers.
