4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch

4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch

4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch
4 Camera Image Combiner Split Full View Parking Monitor Video Recorder w/ Switch. Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC. This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state. When the voltage is restored back to normal will automatically open parking video surveillance state. DVD and DVR Dual Output/Real-Time Video Recording, Parking Video Recording/TF Memory Card. Intelligent automatic recognition NTSL / PAL system and displays split screen Automatic intelligent trigger control / manual control Overcurrent and overload protection electronic fuse, automatic recovery 9-36 V wide voltage which can provide a stable 12 volts to cameras Automatically start-up , shut-off and switches dvd screen Compact housing, low power consumption, designed intelligent energy-saving less than 2 watt for driving inhabits. (1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control. Button is on, press ESC or. Stop recording (The default boot automatically start recording). Press the “MENU” button to enter the first page of the menu. Press again to switch SETUP menu page, select FORMAT. Press the REC or. Press the left and right buttons to select EXECUTE, press “ESC or”. (2)Modify the system date and time: Press the “MENU” button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again. Key to enter the interface, press the “left” or “right” key to switch to the SET. Button to enter the date and time. By switching the left and right. Press” MENU “button to confirm and switch, press REC or. Button to confirm, press the” MENU “to exit. (3) Playback: Press ESC or. Stop video playback again. To enter the Playback menu. Press the “left” or “right” button to select the video file. Press the” MENU “button to fast forward. Blue background is selected, the yellow background is not selected. Supports all N or P system camera signal inputpower on the product will automatically recognize the camera system standard. Front/Rear/Left/Right four directions around, 360 degree panoramic monitor display, complete eliminate the car visual dead in front and back. Using the most advanced split-screen technology, easily switch monitor position, arbitrary control of the vehicle to avoid the obstacle 5. Suitable for the current urban parking environment, easy to rub when parking in narrow spaces narrow spaces. It is more easier when parking in complex environment, the driver can be visually detected in the surrounding to avoid collision when parking. Video inputs 4-CH inputs Video system PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) Video parameters Resolution 640480, 25FPS, Vp-p:1.0V, impedance: 75 Video Interface 4 inputs (RCA connector), 2 outputs (RCA connector) Control mode trigger control:High Trigger/Remote control/ One key control Auto display mode Auto display Various Modes Mirror OFF/ON Operating temperature -10 to +65 Power Consumption hosts running: 2W; power-saving mode: 1W Output Power 12V / 0.8A (camera power supply) Rated voltage DC 12V/24V Best Image Quality VAG Audio Frequency1 input 1 output TF Card Memory 64G (TF card Not Included in Package) N. Size 915323mm (L W H). (1) Power Led, Power, the lights lit, whe. N the voltage is lower than 9v, the power light flashes; when the system. Enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V. (2) trigger line and manual keys can select the image in any way 4-way camera. 3In Trigger state, hand the keys effectively. When you press the manual key “Quad” of or H button. The trigger is invalid, Undo “QUAD” trigger to be effective. 4 After triggering undo, image delay three seconds, and enters the standby state. (5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line. Corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen. (6) can connect up to four cameras, and automatically split video screen. (7) car camera powered by the device for easy wiring. (8) DVD display device triggered by a switch, wiring and display convenience. (9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect. Package includes: 1Video Cables 31cm×6pcs 2Display Video Cable1M 3Remote Control 4Micro SD Card Reader 5IR Receiver&SMD switch 69V-36V Power Votage 7Video control box 8Camera Trigger LINE 94×camerasFront back Leftright 10User Manul 11Guarantee Card. Handle Time: PDT 01:00 / GMT 09:00. In One Day (Excluded Sunday & Holiday). Customer Services & Feedback. Customer Services Time (Excluded Holiday). 00:00-04:00 20:00-00:00. 00:00-01:00 17:00-00:00. Solve any problems with you in friendly way after communication. Well-Packed protects your items with suitable material so as to avoid damage during transit. ECheque will be held until cleared. The item “4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch” is in sale since Tuesday, May 09, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mouldings & Trim”. The seller is “fcdx1600″ and is located in CN. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Left
  • Warranty: 90 Day
  • Size: 91*53*23mm
  • Item: DVR Night Vision Full View Monitoring Box
  • Color: Black
  • Rated voltage: DC 12V/24V
  • Operating temperature: -10 to +65
  • Video Interface: 4 RCA inputs, 2 RCA outputs
  • Video system: PAL/NTSC

4 Camera Image Combiner Split Full View Parking Monitor Video Recorder with Switch

Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring

Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring

Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring
360° Full Parking View With Front/Rear/Rig. Ht/Left 4 Cameras DVR&Video Monitoring. Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC. This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state. When the voltage is restored back to normal will automatically open parking video surveillance state. DVD and DVR Dual Output/Real-Time Video Recording, Parking Video Recording/TF Memory Card. Intelligent automatic recognition NTSL / PAL system and displays split screen Automatic intelligent trigger control / manual control Overcurrent and overload protection electronic fuse, automatic recovery 9-36 V wide voltage which can provide a stable 12 volts to cameras Automatically start-up , shut-off and switches dvd screen Compact housing, low power consumption, designed intelligent energy-saving less than 2 watt for driving inhabits. (1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control. Button is on, press ESC or. Stop recording (The default boot automatically start recording). Press the “MENU” button to enter the first page of the menu. Press again to switch SETUP menu page, select FORMAT. Press the REC or. Press the left and right buttons to select EXECUTE, press “ESC or”. (2)Modify the system date and time: Press the “MENU” button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again. Key to enter the interface, press the “left” or “right” key to switch to the SET. Button to enter the date and time. By switching the left and right. Press” MENU “button to confirm and switch, press REC or. Button to confirm, press the” MENU “to exit. (3) Playback: Press ESC or. Stop video playback again. To enter the Playback menu. Press the “left” or “right” button to select the video file. Press the” MENU “button to fast forward. Blue background is selected, the yellow background is not selected. Supports all N or P system camera signal inputpower on the product will automatically recognize the camera system standard. Front/Rear/Left/Right four directions around, 360 degree panoramic monitor display, complete eliminate the car visual dead in front and back. Using the most advanced split-screen technology, easily switch monitor position, arbitrary control of the vehicle to avoid the obstacle 5. Suitable for the current urban parking environment, easy to rub when parking in narrow spaces narrow spaces. It is more easier when parking in complex environment, the driver can be visually detected in the surrounding to avoid collision when parking. Video inputs 4-CH inputs Video system PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) Video parameters Resolution 640480, 25FPS, Vp-p:1.0V, impedance: 75 Video Interface 4 inputs (RCA connector), 2 outputs (RCA connector) Control mode trigger control:High Trigger/Remote control/ One key control Auto display mode Auto display Various Modes Mirror OFF/ON Operating temperature -10 to +65 Power Consumption hosts running: 2W; power-saving mode: 1W Output Power 12V / 0.8A (camera power supply) Rated voltage DC 12V/24V Best Image Quality VAG Audio Frequency1 input 1 output TF Card Memory 64G (TF card Not Included in Package) N. Size 915323mm (L W H). (1) Power Led, Power, the lights lit, whe. N the voltage is lower than 9v, the power light flashes; when the system. Enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V. (2) trigger line and manual keys can select the image in any way 4-way camera. 3In Trigger state, hand the keys effectively. When you press the manual key “Quad” of or H button. The trigger is invalid, Undo “QUAD” trigger to be effective. 4 After triggering undo, image delay three seconds, and enters the standby state. (5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line. Corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen. (6) can connect up to four cameras, and automatically split video screen. (7) car camera powered by the device for easy wiring. (8) DVD display device triggered by a switch, wiring and display convenience. (9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect. Package includes: 1Video Cables 31cm×6pcs 2Display Video Cable1M 3Remote Control 4Micro SD Card Reader 5IR Receiver&SMD switch 69V-36V Power Votage 7Video control box 8Camera Trigger LINE 94×camerasFront back Leftright 10User Manul 11Guarantee Card. Handle Time: PDT 01:00 / GMT 09:00. In One Day (Excluded Sunday & Holiday). Customer Services & Feedback. Customer Services Time (Excluded Holiday). 00:00-04:00 20:00-00:00. 00:00-01:00 17:00-00:00. Solve any problems with you in friendly way after communication. Well-Packed protects your items with suitable material so as to avoid damage during transit. ECheque will be held until cleared. The item “Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring” is in sale since Monday, May 08, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Mouldings & Trim”. The seller is “chunlianzha_8″ and is located in CN. This item can be shipped worldwide.
  • Placement on Vehicle: Left
  • Manufacturer Part Number: Does not apply
  • Brand: Unbranded
  • Warranty: 90 Day
  • Interchange Part Number: Does not apply
  • Other Part Number: Does not apply
  • Color: Black
  • Operating temperature: -10 to +65
  • Best Image Quality: VAG
  • Audio Frequency: 1 input 1 output
  • TF Card Memory: 64G (TF card Not Included in Package)
  • Size: 91*53*23mm (L * W * H)
  • Video inputs: 4-CH inputs
  • Output Power: 12V / 0.8A (camera power supply)
  • Rated voltage: DC 12V/24V

Car 360° Full Parking View System Split Image & 4 Cameras DVR Video Monitoring

Incoming search terms:

  • cars with 360 monitoring system 2017

9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV

9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV

9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV
You may also like. 9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV. 9 TFT LCD 4-SPlit Screen Car Rear View Backup Parking Monitor. +4x 18 IR LEDs Night Vision Waterproof REAR VIEW Backup CCD Color Camera with Guide Lines for Parking Security + 4x 10M / 33Ft Video Cable & Power Cable. This is a 9 inch color TFT LCD car rearview monitor with 4 video input, works perfectly with car rearview cameras, supports car DVD/serveillance camera/STB/satellite receiver/other video equipment. Comes with an IR remote controller for easy operation. 100% brand new and high quality. Easy installation, without damaging any parts of the car, clip on the original mirror. Special optical lens substitute the original rearview mirror. Supports car DVD, VCD, camera, and other video equipment. With 4 video input port AV2 connects to car rearview camera, AV1 connects to DVD or VCD. When parking the car, the rearview image appears onto the screen automatically. Operation mode: touch buttons and remote control operation. With the menu buttonbrightness/contrast/hue/ language is adjustable. No audio input or output. Professionally designed system with industrial leading components/parts. CCD camera with 2.1mm wide angle lens. This offers a super wide field of view angle at 120°. Most other manufacturers use 3.6mm or 2.8mm lens, the view angle is much narrower. You can see more areas by using 2.1mm lens. Builtin 18 IR LEDs for over 20ft nightvision view. Heavyduty 10M (33ft) video + power cable with a waterproof aerospacetype connector. Waterproof camera body with a sunvisor and metal bracket. Easy to mount on any flat surface of the vehicle. Rubber seat for video cable to go through inside the cabinet without scratching the surface. 12V DC power input range to fit most of the medium to large vehicles on the road. Allinone design to get rid of the bulky converter power box, very easy to setup. The TFT SCREEN has the switches to change between normal to mirrored image of the 2 cameras. Camera selection is done via remote controller or by pressing button on the monitor. Rear view camera is turned on automatically when vehicle is put on reverse gear. The most advanced part is that the 2 cameras can switch on in turn automatically depending on the status of your vehicle, like opening the door. Aerospacetype cinch connectors are used for all connections. This is more reliable and simple to install. Lightweight 16:9 wide angle view 9 TFT LCD color monitor with remote controller. Special heatventilation design for longer life of use. 9 inch Rearview monitor with Touch Button. High Sensitive Touch Button for Easy Operation. Four video inputs, Auto switch to V4 when reversing. Resolution:800(W)X3(RGB)X234(H)High resolution wide screen. Split 2 images display or 3 images display or 4 images or full screen Single image. Last memory play function. View angle:up30; down30; left60; right60. Screen Type: 16:9. Dimension:273(w)X110(h)X26(D)mm. 1 X digital 9 TFT LCD color monitor. 1 X Mount/stand. 4 X Water-proof CCD Color cameras with IR LEDs Night Vision. 4 X 33ft/10M 4Pin extension cable for cameras. 1 X Remote control (Without Battery). 1 X Power connection wire(video connectors are built-in this wire). 1 X Screw kit for installation. 1 X User manual. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. Your recognition will make us more confident to develop business and serve you better. We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem. We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. Your satisfaction is important to us. The item “9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV” is in sale since Tuesday, March 28, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2014zhaowei123″ and is located in Shenzhen. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Unbranded
  • UPC: Does not apply
  • EAN: Does not apply
  • Screen Size: 9″

9 Quad Split Screen Monitor 4x Backup REAR VIEW CCD Camera System For Truck RV

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 9 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 9 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 9 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1132V. Monitor can be set. Monitor can be set in single view mode. When the monitor is in single view mode and displaying the image of camera1, there will be a rear distance scale on the screen. Digital Wireless Receive Monitor(Model:SP-966M2). 9 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. Free Operating Voltage: DC1032V. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS2). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1 with mirror image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. Thanks for your business! If have questions on how to install the system, please contact me! The item “9 DIGITAL WIRELESS SPLIT LCD REAR VIEW BACKUP CAMERA SYSTEM NO INTERFERENCE” is in sale since Wednesday, May 11, 2011. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: VEISE
  • Model: DF-966M2361
  • MPN: DF-966M2361
  • Screen Size: 9″
  • Country/Region of Manufacture: China
  • Wireless BACK-UP Camera System: WATERPROOF&IR&SHOCKPROOF
  • Monitor: 9″ WIRELESS SPLIT TFT LCD MONITOR
  • Camera: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
  • WIRELESS TRANSMITTING: 2.GHZ DIGITAL WIRELESS SIGNAL

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

Incoming search terms:

  • interference in rearview camera

9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv

9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv
9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv
9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv
9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv

9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. One 9 DIGITAL QUAD LCD Monitor + FOUR CCD Cameras with night vision +15M Extension Cable2 +10M Extension Cable2+Accessories. 9 Inch DIGITAL QUAD/SPLIT TFT LCD Monitor, Image will be more clear and vivid than analog monitor’s. TO DISPLAY FOUR IMAGES SIMULTANEOUSLY ON SCREEN. SINGLE/DUAL/TRIPLE/QUAD MODES CAN BE SET BY MENU. Multiple menu languages: English, Dutch, French, Spanish, Russian, German, Italian. Single, dual, triple, quad image for optional. When connecting cameras and monitor, users often make short-circuit by connecting connector pins improperly. With the protector, the monitor will not be damaged by the improper operation. Color CCD Rear View Camera with night vision , waterproof IP69K. Four pin female connector. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. Extension cables with 4 pin screw connector. Thanks for your business! The item “9 DIGITAL QUAD SPLIT MONITOR REAR VIEW BACK UP CAMERA SYSTEM FOR BUS TRUCK RV” is in sale since Tuesday, August 27, 2013. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: LUVIEW
  • MPN: Does Not Apply
  • Screen Size: 9″
  • Country of Manufacture: China
  • CAMERA: Sharp CCD, IR,Waterproof,dustproof,anti-acid
  • MONITOR: 9″ Digital QUAD/SPLIT TFT LCD
  • POWER INPUT: DC12-32V FREE POWER INPUT
  • EXTENSION CABLE: 15m and 10m cable with 4pin waterproof connector
  • Camera Connection Type: Wired
  • Screen Display: TFT – LCD

9 Digital Quad Split Monitor Rear View Back Up Camera System For Bus Truck Rv

Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera

Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera

Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera
360° Full Parking View With Front/Rear/Rig. Ht/Left 4 Cameras DVR&Video Monitoring. Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC. This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state. When the voltage is restored back to normal will automatically open parking video surveillance state. DVD and DVR Dual Output/Real-Time Video Recording, Parking Video Recording/TF Memory Card. Intelligent automatic recognition NTSL / PAL system and displays split screen Automatic intelligent trigger control / manual control Overcurrent and overload protection electronic fuse, automatic recovery 9-36 V wide voltage which can provide a stable 12 volts to cameras Automatically start-up , shut-off and switches dvd screen Compact housing, low power consumption, designed intelligent energy-saving less than 2 watt for driving inhabits. (1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control. Button is on, press ESC or. Stop recording (The default boot automatically start recording). Press the “MENU” button to enter the first page of the menu. Press again to switch SETUP menu page, select FORMAT. Press the REC or. Press the left and right buttons to select EXECUTE, press “ESC or”. (2)Modify the system date and time: Press the “MENU” button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again. Key to enter the interface, press the “left” or “right” key to switch to the SET. Button to enter the date and time. By switching the left and right. Press” MENU “button to confirm and switch, press REC or. Button to confirm, press the” MENU “to exit. (3) Playback: Press ESC or. Stop video playback again. To enter the Playback menu. Press the “left” or “right” button to select the video file. Press the” MENU “button to fast forward. Blue background is selected, the yellow background is not selected. Supports all N or P system camera signal inputpower on the product will automatically recognize the camera system standard. Front/Rear/Left/Right four directions around, 360 degree panoramic monitor display, complete eliminate the car visual dead in front and back. Using the most advanced split-screen technology, easily switch monitor position, arbitrary control of the vehicle to avoid the obstacle 5. Suitable for the current urban parking environment, easy to rub when parking in narrow spaces narrow spaces. It is more easier when parking in complex environment, the driver can be visually detected in the surrounding to avoid collision when parking. Video inputs 4-CH inputs Video system PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) Video parameters Resolution 640480, 25FPS, Vp-p:1.0V, impedance: 75 Video Interface 4 inputs (RCA connector), 2 outputs (RCA connector) Control mode trigger control:High Trigger/Remote control/ One key control Auto display mode Auto display Various Modes Mirror OFF/ON Operating temperature -10 to +65 Power Consumption hosts running: 2W; power-saving mode: 1W Output Power 12V / 0.8A (camera power supply) Rated voltage DC 12V/24V Best Image Quality VAG Audio Frequency1 input 1 output TF Card Memory 64G (TF card Not Included in Package) N. Size 915323mm (L W H). (1) Power Led, Power, the lights lit, whe. N the voltage is lower than 9v, the power light flashes; when the system. Enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V. (2) trigger line and manual keys can select the image in any way 4-way camera. 3In Trigger state, hand the keys effectively. When you press the manual key “Quad” of or H button. The trigger is invalid, Undo “QUAD” trigger to be effective. 4 After triggering undo, image delay three seconds, and enters the standby state. (5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line. Corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen. (6) can connect up to four cameras, and automatically split video screen. (7) car camera powered by the device for easy wiring. (8) DVD display device triggered by a switch, wiring and display convenience. (9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect. Package includes: 1Video Cables 31cm×6pcs 2Display Video Cable1M 3Remote Control 4Micro SD Card Reader 5IR Receiver&SMD switch 69V-36V Power Votage 7Video control box 8Camera Trigger LINE 94×camerasFront back Leftright 10User Manul 11Guarantee Card. Handle Time: PDT 01:00 / GMT 09:00. In One Day (Excluded Sunday & Holiday). Customer Services & Feedback. Customer Services Time (Excluded Holiday). 00:00-04:00 20:00-00:00. 00:00-01:00 17:00-00:00. Solve any problems with you in friendly way after communication. Well-Packed protects your items with suitable material so as to avoid damage during transit. ECheque will be held until cleared. The item “Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera” is in sale since Tuesday, May 09, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Electrical Components\Other Electrical Components”. The seller is “eurofeiyan66″ and is located in HK. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: Unbranded
  • Fitment: PAL/NTSC
  • Rated Voltage: DC 12V/24V
  • Warranty: YES

Car 360° Full Parking View Split Image Screen Front/Rear/Right/Left +4 HD Camera

360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR

360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR

360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR
360° Full Parking View With Front/Rear/Rig. Ht/Left 4 Cameras DVR&Video Monitoring. Parking monitoring starting voltage must be greater than 12.5V (car batteries generally 13-14V), then the battery power, and a fifth DIP switch to dial up sign Parking REC. This product has a power loss protection, voltage less than 11.5V off automatically enter the sleep state. When the voltage is restored back to normal will automatically open parking video surveillance state. DVD and DVR Dual Output/Real-Time Video Recording, Parking Video Recording/TF Memory Card. Intelligent automatic recognition NTSL / PAL system and displays split screen Automatic intelligent trigger control / manual control Overcurrent and overload protection electronic fuse, automatic recovery 9-36 V wide voltage which can provide a stable 12 volts to cameras Automatically start-up , shut-off and switches dvd screen Compact housing, low power consumption, designed intelligent energy-saving less than 2 watt for driving inhabits. (1)Before using TF card format: TF card is inserted, power boot into POST mode (display automatically turns off after five seconds into standby) by remote control. Button is on, press ESC or. Stop recording (The default boot automatically start recording). Press the “MENU” button to enter the first page of the menu. Press again to switch SETUP menu page, select FORMAT. Press the REC or. Press the left and right buttons to select EXECUTE, press “ESC or”. (2)Modify the system date and time: Press the “MENU” button to enter the menu, press the switch to the SETUP menu page, select DATE INPUT again. Key to enter the interface, press the “left” or “right” key to switch to the SET. Button to enter the date and time. By switching the left and right. Press” MENU “button to confirm and switch, press REC or. Button to confirm, press the” MENU “to exit. (3) Playback: Press ESC or. Stop video playback again. To enter the Playback menu. Press the “left” or “right” button to select the video file. Press the” MENU “button to fast forward. Blue background is selected, the yellow background is not selected. Supports all N or P system camera signal inputpower on the product will automatically recognize the camera system standard. Front/Rear/Left/Right four directions around, 360 degree panoramic monitor display, complete eliminate the car visual dead in front and back. Using the most advanced split-screen technology, easily switch monitor position, arbitrary control of the vehicle to avoid the obstacle 5. Suitable for the current urban parking environment, easy to rub when parking in narrow spaces narrow spaces. It is more easier when parking in complex environment, the driver can be visually detected in the surrounding to avoid collision when parking. Video inputs 4-CH inputs Video system PAL/NTSC(automatic identification system, attention, connect the camera before power on, The equipment support hybrid system) Video parameters Resolution 640480, 25FPS, Vp-p:1.0V, impedance: 75 Video Interface 4 inputs (RCA connector), 2 outputs (RCA connector) Control mode trigger control:High Trigger/Remote control/ One key control Auto display mode Auto display Various Modes Mirror OFF/ON Operating temperature -10 to +65 Power Consumption hosts running: 2W; power-saving mode: 1W Output Power 12V / 0.8A (camera power supply) Rated voltage DC 12V/24V Best Image Quality VAG Audio Frequency1 input 1 output TF Card Memory 64G (TF card Not Included in Package) N. Size 915323mm (L W H). (1) Power Led, Power, the lights lit, whe. N the voltage is lower than 9v, the power light flashes; when the system. Enters standby mode, the power light flashes. This product is the normal input voltage of 12 / 24V. (2) trigger line and manual keys can select the image in any way 4-way camera. 3In Trigger state, hand the keys effectively. When you press the manual key “Quad” of or H button. The trigger is invalid, Undo “QUAD” trigger to be effective. 4 After triggering undo, image delay three seconds, and enters the standby state. (5) the trigger condition, no priority, when the trigger line when more than two trigger, then the trigger line. Corresponding channel full-screen image, only three seconds, and then jumps automatically split image screen. (6) can connect up to four cameras, and automatically split video screen. (7) car camera powered by the device for easy wiring. (8) DVD display device triggered by a switch, wiring and display convenience. (9) Each image can be set to forward / mirroring respectively, RCA connectors can be configured to connect. Package includes: 1Video Cables 31cm×6pcs 2Display Video Cable1M 3Remote Control 4Micro SD Card Reader 5IR Receiver&SMD switch 69V-36V Power Votage 7Video control box 8Camera Trigger LINE 94×camerasFront back Leftright 10User Manul 11Guarantee Card. Handle Time: PDT 01:00 / GMT 09:00. In One Day (Excluded Sunday & Holiday). Customer Services & Feedback. Customer Services Time (Excluded Holiday). 00:00-04:00 20:00-00:00. 00:00-01:00 17:00-00:00. Solve any problems with you in friendly way after communication. Well-Packed protects your items with suitable material so as to avoid damage during transit. ECheque will be held until cleared. The item “360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR” is in sale since Tuesday, May 09, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Interior Parts & Furnishings\Other Interior Parts & Trim”. The seller is “eurofeiyan66″ and is located in Hong Kong. This item can be shipped worldwide.
  • Brand: Unbranded
  • Manufacturer Part Number: Does Not Apply
  • Placement on Vehicle: Front
  • Fitment: PAL/NTSC
  • Warranty: YES
  • Rated Voltage: DC 12V/24V

360° Full Parking View Front/Rear/Right/Left Split Image Screen 4HD Cameras DVR

9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA

9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA

9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA
New Generation Wired Heavy Vehicle CCD Reversing Complete Kit 4-pin connector, one cable does it all! 9 Quad Monitor + 3X CCD Waterproof Metal Cover Camera. A luxury solution for car reverse & all sides. 2X Side View CCD waterproof IR camera with wide view angle. 1x Rear View CCD waterproof IR camera with wide view angle. 3X 10m length video cable for bus/truck Quad 9 High quality TFT LCD monitor 4X channel video inputs Easy installation. This item is 12V-24V version. There are 11 different modes to display, meeting different needs. The CCD image sensor outputs digital signals that improve picture’s clarity, color contrasting and sharpness to a better level than CMOS camera. With its 18 individual Infrared (IR) LED, CCD camera shows clear images in low light conditions especially at night circumstances. This heavy duty CCD camera is hard metal cased, waterproof and mud proof. Can last for a longer time without heating up, providing rearview at all time. The advantages of 4-pin connector cable. One cable solution deals with both power and singal transmission. No power cable is needed to connect cameras. Special thick hard wire can shield vehicle’s circuit interference better than normal AV cable. 18 infrared lamp used in the low light condition. You can easily adjust the angle at Multi-level. 120 degree angle lens, ensure cars rear side for effective reversing and parking operation. This item is for 12V-24V power input vehivles. Monitor cable is approx. 2.5m (7.4ft) long. Video cable is 10m(33ft) long. 1x 9” TFT LCD Monitor. 1 x Rearview Camera. 2x Side View Camera. 1 x Power Cable. 1 x Remote Controller (Batteries are not included). 3 x 10m 4-Pin Cable. 1/4” High Performance Color SHARP CCD. PAL:720(H)586(V) , NTSC:720(H)480(V). 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). 9” CAR TFT LCD Monitor. 9-inch panel (diagonal length). (left/right) 65 degrees(top) 40 degrees (up). 2 images/4 images adjustable. One way volume input. This will be calculated when you checkout your shopping cart. We make sure each order arrives on time and damage free. State the items that you would like to return and the reason for the return. Return item must be in its original/unused condition. IPOSTER Electronics Enterprise was founded in 2005. We have our onw factory in Dong Guan, Guang Dong Province. What’s more, We work with many different suppliers and also import electronics from worldwide. We do our best to insure that every customer is happy since your happiness is our success! We guarantee to solve your problems in a way you’ll be satisfied! We normally reply to emails within 48 hours. The item “9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA” is in sale since Tuesday, August 02, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “iposter” and is located in Shenzhen,Guangdong. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: iPoster
  • MPN: Does Not Apply
  • Screen Size: 9″
  • Camera Connection Type: Wired
  • Screen Display: LCD
  • Country/Region of Manufacture: China

9 Split Screen CAR REAR VIEW CAMERA SYSTEM REVERSING CAMERA 2x SIDE VIEW CAMERA

9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck

9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck

9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck
New Generation Wired Heavy Vehicle CCD Reversing Complete Kit 4-pin connector, one cable does it all! 9 Quad Monitor + 4X CCD Waterproof Metal Cover Camera. A luxury solution for car reverse & all sides. 4 X CCD waterproof IR camera with wide view angle. 4 X 10m length video cable for bus/truck. Quad 9 High quality TFT LCD monitor. 4 X channel video inputs. This item is 12V-24V version. Screen size:9-inch TFT Color Monitor. Power Supply:12-24V DC. Contrast:Color, brightness adjustable. Video:4-channel video inputs. Audio:one way volume input. Pick-up Device:1/3SONY CCD. TV System:PAL(CCIR) NTSC(EIA). Scanning system:PAL:625 lines 50Field;NTSC:525 lines 60Field. Lens:2.8mm(Option). Number of pixels:500(H)x582(V), 510(H)x492(V). Horizontal Resolution:420TV Lines. Scan frequeny:50Hz, 60Hz. Electronic Shutter:1/501/100(sec), 1/601/100,000(sec). S/N Ratio:48dB(AGC OFF). Minimun Illumiation:0.8LUX/F1.2. Gain Control(AGC):AUTO. Video Output:1.0Vp-p. Synchronous System:Intemal Synhronization. Power supply:DC 12V-24V. Wired Heavy Vehicle CCD Reversing Complete Kit 4-pin connector, one cable does it all. Quad 9 High quality TFT Color monitor. Single View/ Split/ Quad Image View Selectable. Suitable for back view/ side cameras. Monitor can be ceiling mounted. There are 11 different modes to display, meeting different needs. 18 infrared lamp used in the low light condition. You can easily adjust the angle at Multi-level. Easy and safe to mount. The advantages of 4-pin connector cable. One cable solution deals with both power and singal transmission. No power cable is needed to connect cameras. Special thick hard wire can shield vehicle’s circuit interference better than normal AV cable. The CCD image sensor outputs digital signals that improve picture’s clarity, color contrasting and sharpness to a better level than CMOS camera. With its 18 individual Infrared (IR) LED, CCD camera shows clear images in low light conditions especially at night circumstances. This heavy duty CCD camera is hard metal cased, waterproof and mud proof. Can last for a longer time without heating up, providing rearview at all time. Default four cameras are all mirror image. If you need non-mirror image cameras please inform us ASAP. 1 x 9 TFT LCD Rearview Monitor (DC 12-24V). 4 x CCD Camera (DC 12-24V). 1 x Mounting Plate. 1 x Remote Controller (batteries are not included). 4 x 10m 4pin video cable. 1 x 4pin(female) to av & dc cable. The item “9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck” is in sale since Friday, July 28, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “ehappyroad” and is located in Walton KY. This item can be shipped to United States.
  • Type: Rear View Monitor w/Cam Kit
  • Model: 4Pin Wired
  • Screen Size: 9in
  • Compatible Vehicle Make: Truck
  • Camera Connection Type: Wired
  • Screen Display: TFT – LCD
  • Country/Region of Manufacture: China
  • UPC: Does Not Apply
  • EAN: Does Not Apply
  • Brand: Ehotchpotch
  • MPN: Does not apply

9 Split Quad Car Rear View Monitor + 4x 4Pin Backup CCD Camera 33Ft For Truck

9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv

9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv

9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv
9 Quad Car TFT LCD Reversing Monitor 4 Channel. CCD Backup Camera 24V-12V. 9” CAR TFT LCD Monitor. (left/right)65 degrees(top) 40degrees(up). 2 images/4 images adjustable. Contrast, Colors, brightness adjustable. One way volume input. APAL:720(H)586(V) , NTSC:720(H)480(V). What’s in the box. 1 x 9 inch TFT LCD Monitor 4 x Rearview Camera 1 x Power Cable 4 x 10m 4-Pin Cable 1 x Remote Controller (Batteries are not included) 1 x Instruction. The item “9 QUAD SPLIT SCREEN MONITOR BACKUP REAR VIEW CAMERA SYSTEM FOR TRUCK TRAILER RV” is in sale since Friday, July 28, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “car_dreamstore” and is located in KY. This item can be shipped worldwide.
  • Type: Rear View Monitor w/Cam Kit
  • Model: 9″ Monitor/Camera Car Kit
  • Screen Size: 9″ Split screen
  • Camera Connection Type: Wireless
  • Screen Display: TFT – LCD
  • Image Device: 1/3 Color CCD
  • TV System: PAL / NTSC
  • Effective Pixels: 800 (H) × 480 (V) RGB
  • Horizontal Resolution: 420 TV lines
  • Electronic Shutter: 1/60-1/15,000 seconds
  • Minimum Illumination: 0.1-0.5Lux/F = 1.2 (0Lux with IR on)
  • Power Requirement: DC12V-24V 60mA (MAX 300mA with IR on)
  • Operating Temperature: -10°C~ 50°C, RH95% Max
  • Brand: Ehotchpotch
  • MPN: Does not apply

9 Quad Split Screen Monitor Backup Rear View Camera System For Truck Trailer Rv