LED Brake Light Rear View Camera + 7 Monitor Fit For Mercedes Sprinter Crafter

Posted on December 31, 2020 by admin

LED Brake Light Rear View Camera + 7 Monitor Fit For Mercedes Sprinter Crafter

Your car must have interior to mount the monitor, or not fit your car! The monitor is universal item, but the camera is special for Mercedes-Benz Sprinter. This camera is a bespoke reversing camera designed specifically for use with the Mercedes-Benz Sprinter. It will simply replace your existing rear high level brake light located at the top of the rear doors, integrating seamlessly with the lights original mounting clips/screws. The camera is designed to replicate the size and shape of the existing high level brake light but with the addition of a precision angled camera. Once correctly installed, the camera will automatically power on as soon as the vehicle is put into reverse delivering a PAL video signal via the included 10 metre RCA video cable signal to any monitor with an RCA reverse camera input -The camera is also compatible with any aftermarket car head unit with a suitable video input. If your aftermarket head unit has a dedicated camera input then the camera can be set up so that the rear-view image can be automatically displayed as soon as the car is put into reverse. The camera is not designed for use with original factory-fitted monitors or OEM displays, as vehicle manufacturers do not design their equipment with the required RCA video inputs used by aftermarket cameras. Uses with this item no more wonder what’s going on in the back -Displays a reversed camera image on the monitor to duplicate the normal view seen in a rear view mirror. Perfect solution to get rid if that poor rear view visibility on your car, boat, trailer, camper, truck, or any vehicle that has no rear-view mirror or poor rear vision. Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution. Mounted inside will fit into most vehicle key holes, no other installation needed. Small compact size Waterproof Low power consumption High sensitivity Low maintenance Easy and comprehensive installation Night vision Camera. Camera dimensions: (31cm between screw holes, 3.2cm wide) Van hole: (29cm long x 1.5cm wide) TV System:PAL Sensor:CMOS Effective Pixels:682504/728576 Horizontal Sync Frequency:15625KHz Vertical Sync Fre:50Hz Scanning System:2:1 Interlace Sync System: Internal White BalanceAuto Resolution: 420 -480TV lines Signal to noise ratio:> 48dB (AOC on) Current Consumpition:no more 150mA Minimum illumination: 0.5Lux Operating voltage: 12V DC Output line: power supply, signal line, ground Operating temperature: -20 +70 , RH95% MAX Storage temperature: -30 +80 , Rh95% MAX Lens Angle Deg. The monitor comes with dual video input i. V1 and V2, with V1 video as the default when the reverse gear is not engaged, once the reverse gear is engaged the monitor automatically switches to V2 video input. Switching between V1 and V2 inputs (when not reversing) can be done by pressing the V1/V2 button on the right side of display or using remote control key:’video select’ -The display automatically powers on when reverse gear is engaged, and if there is no video signal, the monitor can be turned on/off by pressing the power button. Screen size: 7 inches Size:25×10.8cm Aspect ratio:16:9 Resolution: 800×480 Contrast ratio: 350:1 Bluetooth: 2.0 Video input: Two video inputs, Automatically display when reversing. Input signal: AV Input standard: PAL / NTSC Current source: DC12V Power: 6W Operating temperature: -20-70 degrees Celsius. Rear view image screen can be up / down / left / right image flip Optional: Bluetooth, digital HD screen, with audio. 1x Camera 1x Monitor. Instruction Not Included, Professional Installation Is Highly Recommended. Please allow 1-3MM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. International buyers please note: a. These charges are buyers responsibility. The item “LED Brake Light Rear View Camera + 7 Monitor Fit For Mercedes Sprinter Crafter” is in sale since Tuesday, January 7, 2020. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “ynaan” and is located in Shenzhen. This item can be shipped worldwide.

Type: Rear View Camera Kit
MPN: Wke9716145
Features: Night Vision, Waterproof
Reversing Camera Type: Colour Camera Kits
Manufacturer Part Number: Wke9716145
Camera Connection Type: Wired
Screen Size: 7″
Fitment: For Mercedes Sprinter
Brand: AUDEW

3rd Brake Light Reversing Reverse Camera For Mercedes Sprinter W639 VW Crafter

Posted on February 20, 2020 by admin

3rd Brake Light Reversing Reverse Camera For Mercedes Sprinter W639 VW Crafter

3rd Brake Light Reversing Reverse Camera For Mercedes Sprinter W639 VW Crafter. UK Based VAT Registered Company. We Are Specialists In What We Sell. A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse (when wired correctly). Thanks to our RVC technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety. The high level brake lights with the built in rear view camera is a great piece of kit and will simply replace your existing 3rd brake light for easy installation. This bespoke nature of the camera is designed specifically for use with the vehicles on the fitment list. Its unique design means that no holes whatsoever need to be drilled! It will simply replace your existing 3rd brake light. This camera has been designed to replicate the size and shape of the existing high level brake light but with a discrete inbuilt camera. Our Direct Fit by Audio Tech Direct reverse cameras are simply amazing and offer many new technologies that make manoeuvring your vehicle easier and safer. Replaces The Brake Light. PLEASE NOTE: The rear view camera system runs on a +12v system. Some models with CANBUS have voltage drops on the reverse bulb power (for bulb out warnings on the dash). In such cases, a relay would be required with the camera. We have this available with part number CBS-CAMRELAY. The relay is not supplied with the camera. Bespoke design, retains the functionality of a 3rd brake light but with a high definition high level view reversing camera. Convenient RCA output means this camera can be used with any after-market monitor that will accept this cameras video signal. Your head unit or monitor will also require a CAM-In RCA connection. This will NOT work directly with any factory fitted monitors or head units. You will require an interface (if available) adaptor for a factory head unit to accept an after-market rear view camera. Replaces the high level brake light directly. Specially manufactured to replace the existing 3rd brake light, allowing for easy installation without the need for drilling or modification. The product will also retain the normal standard functionality of a boot handle too. Whilst we try and make every effort to make the fitment list as accurate as we can, we cannot cover all variants of each application. It is up to you, the customer, to ensure you double check that the item matches the existing space on the vehicle and also that the product that the camera will connect to will be able to connect and function with the head unit or monitor. DESIGNED TO FIT TO. NOTE: This vehicle list is a guide only. Camera Cable Length: 152cm. Camera Extension Cable Length: 6m. Power Requirement: 12V DC. Image Sensors: 1/3 Colour Sharp CCD. Working Power (DCV): 12V. The item “3rd Brake Light Reversing Reverse Camera For Mercedes Sprinter W639 VW Crafter” is in sale since Thursday, May 9, 2019. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “audiotechdirect” and is located in Shropshire | Yorkshire | Middlesex. This item can be shipped to all countries in Europe, United States, Canada, Australia.

Colour: Black
Compatible Vehicle Make: Please See Listing
Connectivity: Wired
Features: Clear Lens
Manufacturer Part Number: BLMB1
Placement on Vehicle: Rear
Brand: Direct Fit
Colour Camera: Yes

IR LED Brake Light Rear View Reversing Camera + 7 inch Monitor For Ford Transit

Posted on November 10, 2018 by admin

Rear View Reversing Camera + Monitor Kit Wire harness also are included. 1x Remote Control 1x User Manual. Aspect ratio:16:9 , Resolution: 800×480 Contrast ratio: 350:1 Bluetooth: 2.0 Video input: 2 way video, Automatically display when reversing. Ford Transit (2014 onwards). Designed to be fitted in place or rear roof brake light. Complete outer lens brake light with integrated reverse camera. Simply unscrew original outer brake light housing and replace with this combined unit. 4 Pin Connecter 10m Connection Video RCA The Monitor The monitor comes with dual video input i. V1 and V2, with V1 video as the default when the reverse gear is not engaged, once the reverse gear is engaged the monitor automatically switches to V2 video input. Switching between V1 and V2 inputs (when not reversing) can be done by pressing the V1/V2 button on the right side of display or using remote control key:’video select’. The display automatically powers on when reverse gear is engaged, and if there is no video signal, the monitor can be turned on/off by pressing the power button. International buyers please note: a. The item “IR LED Brake Light Rear View Reversing Camera + 7 inch Monitor For Ford Transit” is in sale since Thursday, May 3, 2018. This item is in the category “Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Parking Cameras”. The seller is “zhibinoppa” and is located in HK. This item can be shipped worldwide.

Brand: AUDEW
MPN: Ttu911864
Reversing Camera Type: Colour Camera Kits
Camera Connection Type: Wired
Manufacturer Part Number: Ttu911864
Compatible Vehicle Make: Ford
Features: Night Vision
Screen Size: 7″
Country/Region of Manufacture: Unknown
Lens Angle: 140 Degrees
Vertical Angle: 170
Night Vision Distance: 45 feet
Power: <=4W
Current source: DC 12V
Suitable for: For Ford Transit