EASTMAN KODAK 8X10 VIEW CAMERA 2-D FOLMER GRAFLEX CORP. WithREAR EXTENSION RAIL

Posted on November 30, 2019 by admin

EASTMAN KODAK 8X10 VIEW CAMERA 2-D FOLMER GRAFLEX CORP. WithREAR EXTENSION RAIL

The lens is a Carl Zeiss Jena Tessar Red T 250mm, f4.5 in an Alphax 1/50th shutter. The lens is basically a display piece only as the shutter controls have all been removed and the aperture control is stuck. There is a small scratch on the rear element. Photos clearly show the cosmetic condition. Bellows appear light tight using a simple flashlight test. The strap is a replacement but is functional. The focus adjustment needs some help. You need to pull the front or rear out on the track but it will then rack back with the knobs. The rear extension rail is present and is numbered the same as the camera. This makes a beautiful display piece or with some adjustments could be a great user camera as well. Put a lens on it and fine tune the adjustment apparatus and you are good; or, display it as is. It is expensive but is the only way to get full tracking. Sorry, too many lost packages. The item “EASTMAN KODAK 8X10 VIEW CAMERA 2-D FOLMER GRAFLEX CORP. WithREAR EXTENSION RAIL” is in sale since Friday, November 29, 2019. This item is in the category “Cameras & Photo\Vintage Movie & Photography\Vintage Cameras\Other Vintage Cameras”. The seller is “smookman” and is located in Vacaville, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Finland, Japan, China, Sweden, South Korea, Taiwan, France, Hong Kong, Netherlands, Germany, Switzerland, Norway.

Country/Region of Manufacture: United States

EASTMAN KODAK 8X10 VIEW CAMERA 2-D FOLMER GRAFLEX CORP. WithREAR EXTENSION RAIL

Posted on November 13, 2019 by admin

The lens is a Carl Zeiss Jena Tessar Red T 250mm, f4.5 in an Alphax 1/50th shutter. The lens is basically a display piece only as the shutter controls have all been removed and the aperture control is stuck. There is a small scratch on the rear element. Photos clearly show the cosmetic condition. Bellows appear light tight using a simple flashlight test. The strap is a replacement but is functional. The focus adjustment needs some help. You need to pull the front or rear out on the track but it will then rack back with the knobs. The rear extension rail is present and is numbered the same as the camera. This makes a beautiful display piece or with some adjustments could be a great user camera as well. Put a lens on it and fine tune the adjustment apparatus and you are good; or, display it as is. It is expensive but is the only way to get full tracking. Sorry, too many lost packages. The item “EASTMAN KODAK 8X10 VIEW CAMERA 2-D FOLMER GRAFLEX CORP. WithREAR EXTENSION RAIL” is in sale since Monday, November 11, 2019. This item is in the category “Cameras & Photo\Vintage Movie & Photography\Vintage Cameras\Other Vintage Cameras”. The seller is “smookman” and is located in Vacaville, California. This item can be shipped to United States, Canada, United Kingdom, Denmark, Finland, Japan, China, Sweden, South Korea, Taiwan, France, Hong Kong, Netherlands, Germany, Switzerland, Norway.

Country/Region of Manufacture: United States

Pioneer Double DIN Apple CarPlay In-Dash Car Stereo Receiver withRear view Camera

Posted on October 21, 2019 by admin

Pioneer Double DIN Apple CarPlay In-Dash Car Stereo Receiver withRear view Camera

Pioneer AVH-1400NEX In-Dash Receiver. IDataLink Maestro ready: Just get the right module for your car to get lots of vehicle info on your stereo. Peak: 50 watts x 4 channels. RMS: 17 watts x 4 channels. CD text information display. 6.2 WVGA touchscreen. MP3 ID3 Tag Display (Title/Artist/Album). Navigation add on available. Also available via Apple CarPlay. Playback and Audio Features. CD/CD-R/RW, DVD/DVD-R/RW, MP3/WMA/AAC Playback. MP3/WMA/AAC/MP4 Playback via USB. 13-band graphic/parametric equalizer with selectable tone curves. 3 Sets of preamp outputs (front, rear and subwoofer). Built-in Bluetooth technology for hands-free talking and audio streaming. Cache Night Vision Car License Plate Rearview Camera -Silver CAM810S. Viewing Angle 90 °(Default) /170 ° (optional). Image Solution 712 x 486 pixels. Synchronous system Internal synchonization. Scanning System 2:1 interlaced scanning. Vertical sunc frequency 60Hz. The item “Pioneer Double DIN Apple CarPlay In-Dash Car Stereo Receiver withRear view Camera” is in sale since Friday, May 17, 2019. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Audio\Car Audio In-Dash Units”. The seller is “googol_shop” and is located in Los Angeles, California. This item can be shipped to United States.

California Prop 65 Warning: YES
Brand: Pioneer
Manufacturer Part Number: AVH-1400NEX-CAM810S

Tailgate Replacement Handle withRear View Camera for 2009-2016 Doge Ram Trucks

Posted on January 18, 2017 by admin

The Tailgate replacement handle rear view camera is specifically designed for select Dodge Ram trucks. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input. With the Tailgate replacement handle rear-view camera, you’ll be able to view what’s behind you on your in-dash receiver’s video monitor when you put your vehicle in reverse. Dodge Ram Tailgate Replacement Handle Rear View Camera. The tailgate replacement handle rear-view camera will replace the original tailgate handle. You will need to remove the factory Dodge Ram tailgate handle and then install the new tailgate handle camera a. In place of it. Power & Signal Connections. The tailgate replacement handle camera includes a 23′ composite video cable which will need to be routed through a hole in the bed behind the tailgate and up to the dash, where it connects to the aftermarket head unit. A 30 power/ground cable is supplied on the camera end to tap into power and ground at the reverse light. Parking guide lines are provided on the video signal to aid you in backing up the vehicle. If you do not want this feature, two unconnected white wires on the video cable should be connected together and insulated to delete the guide lines. Tailgate Replacement Handle Rear-View Camera. NTSC wide-angle rear view camera compatible with select Dodge Ram trucks. Resolution: 420 TV lines. 160° wide viewing angle. Super CMOS technology provides a sharper picture day and night. This item is brand new. (never opened, never used, not refurbished). The item “Tailgate Replacement Handle withRear View Camera for 2009-2016 Doge Ram Trucks” is in sale since Friday, October 14, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “eclectic_mart” and is located in Atlanta, Georgia. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, BR, CL, CO, CR, DO.

Type: Rear View Camera Kit
Brand: Dodge
Model: RAMTCAM
MPN: RAMTCAM
Screen Size: Not Applicable
Compatible Vehicle Make: 2009-2016 Dodge Ram Trucks
Camera Connection Type: Wired

Tailgate Replacement Handle withRear View Camera withZoom for 2009-2016 Doge Ram

Posted on November 3, 2016 by admin

The Tailgate replacement handle rear view camera is specifically designed for select Dodge Ram trucks. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input. With the Tailgate replacement handle rear-view camera, you’ll be able to view what’s behind you on your in-dash receiver’s video monitor when you put your vehicle in reverse. Dodge Ram Tailgate Replacement Handle Rear View Camera. The tailgate replacement handle rear-view camera will replace the original tailgate handle. You will need to remove the factory Dodge Ram tailgate handle and then install the new tailgate handle camera a. In place of it. Power & Signal Connections. The tailgate replacement handle camera includes a 23′ composite video cable which will need to be routed through a hole in the bed behind the tailgate and up to the dash, where it connects to the aftermarket head unit. A 30 power/ground cable is supplied on the camera end to tap into power and ground at the reverse light. Parking guide lines are provided on the video signal to aid you in backing up the vehicle. If you do not want this feature, two unconnected white wires on the video cable should be connected together and insulated to delete the guide lines. Tailgate Replacement Handle w/HD Camera. 10 Degree Angle Down, 30% Zoom. NTSC wide-angle rear view camera compatible with select Dodge Ram trucks. Resolution: 420 TV lines. 160° wide viewing angle. Super CMOS technology provides a sharper picture day and night. This item is brand new. (never opened, never used, not refurbished). The item “Tailgate Replacement Handle withRear View Camera withZoom for 2009-2016 Doge Ram” is in sale since Friday, October 14, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “eclectic_mart” and is located in Atlanta, Georgia. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, BR, CL, CO, CR, DO.

Type: Rear View Camera Kit
Brand: Dodge
Model: RAMTCAMZOOM
MPN: RAMTCAMZOOM
Screen Size: Not Applicable
Compatible Vehicle Make: 2009-2016 Dodge Ram Trucks
Camera Connection Type: Wired