Kenwood CMOS-320 Multi View Rear Camera water dust proof Backup JAPAN import F/S. Our products are 100% authentic. Output image: wide angle mirror image (for backward check) / wide angle normal image (for forward confirmation) Shooting element: 1 / 3.6 type color CMOS sensor Number of pixels: Approximately 330,000 pixels Lens: wide angle, focal length f = 1.05 mm F value 2.0 Field of view: horizontal about 195 degrees / vertical about 145 degrees Power supply voltage: 14.4 V (9 to 16 V) Maximum current consumption: approx. 100 mA Video output: 1 Vp-p (75) Illuminance range: about 0.9 to 100,000 lux Cable length: Camera section 1.5 m Power supply cable 7.5 m Switch unit section 1 m External dimensions (W x H x D): Camera section 23.4 x 23.4 x 26.1 mm Stitch unit section 27.5 x 32.8 x 12 mm (excluding projections) Weight: About 23 g (excluding cord) of the camera part Switch unit part Approximately 10 g (excluding cord). Secure high visibility in the anteroposterior direction. CMOS sensor with improved sensitivity compared with the conventional model is mounted, realizing balanced natural drawing. By connecting with the corresponding navigation, you can do various operations on the touch panel of the navigation main unit. Also, it is possible to switch to 4 view modes. You can switch to a normal image that can be used as a guide line display for parking assist or as a front view camera. Abundant screen display Four view modes are installed. You can select from four view modes including “Ultra Wide View” which realizes horizontal angle of view of about 195 degrees, “bird’s eye view” of a viewpoint looking down from directly above. An image without smear noise which is not jammed by light such as the sun. By adopting the CMOS sensor, there is no smear noise such that the line of light enters up and down due to strong light such as the sun. Switch between mirror image and normal image Front view camera compatible. It is possible to switch to a mirror image that can be seen in the same direction as the room mirror and a normal image when used as a front view camera. Ultrahigh sensitivity CMOS sensor and industry’s highest level of night vision ability through high performance lenses. Corresponds to the minimum subject illuminance 0.9 lux, it is possible to check backward at night by just the light of the back lamp. Supports even poor environments Industry’s highest level of dustproof and waterproofing. Dustproof and waterproofing equivalent to IP 67 is realized. It corresponds to exterior installation which will be a bad environment. We are the careful packing. We can try to find other Japanese products if you wish. Note : This product is available in Japan. Most products have Japanese in its instructions or contents. Please understand that for your shopping. We highly recommend using EMS service for safety and smoothly. Especially t o South America and Africa. Germany custom takes really long time to check the item. All of my item is genuine item, I never sell any kind of third party item. T worry about it. International Buyers – Please Note. We will find any item for you. The item “Kenwood CMOS-320 Multi View Rear Camera water dust proof Backup JAPAN import F/S” is in sale since Wednesday, May 17, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “japan_atmarket” and is located in Hyogo. This item can be shipped worldwide.

• Type: Rear View Monitor
• Brand: Kenwood
• Model: CMOS-320
• MPN: CMOS-320