7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment

7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment

7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment
7INCHES REAR VIEW BACKUP CAMERA SYSTEM CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. What’s in the box. 7 single view(not split) monitor X1. Waterproof color camera X1. 32ft extension cable X1. Monitor X-type bracket X1. This is a wired 7 backup camera system with a 32ft extension cable. It is designed solely to assist the driver by improving visibility and reducing known blind spots. It can be used for trucks, vans, mini buses, forklifts, skid loaders, excavators, farm equipments, motorhomes, rv, campers, etc. 7 HD Digital Color LCD Monitor? Monitor comes with digital LCD screen which provides clear image. It has free power input range DC12V36V. And it takes up to 3 – Channel video inputs. Monitor can be automatically activated by the trigger wire to display the camera when reversing. After reversing, it goes back to the original mode. It not only can be used for reversing, but also can be ON all the time. A short-circuit protector and a TVS device are built-in the monitor. Heavy Duty Color Camera? These ensure the camera work well in extreme conditions. With 18 IR lights, the driver also can see clearly what is in the blind spots at night or when the ambient light is low. The image can be rotated by buttons. It allows the camera to be mounted in any directions, up-side-down or horizontally, just press the button to get a right image on the monitor. This system has no different types of connectors. All of them are 4-pin connectors, you just need to plug them together one by one in sequence. Then power it by rear lamp, it works. Screen size: 7 inch single view (No split)? [16 : 9] wide screen display? Multiple menu languages:English, Dutch, French, Spanish, Russian, German, Italian. Support max 3 cameras video input? Monitor displays cameras one by one in single view, ? Normal/mirror image of each camera can be set separately by menu. Separate trigger control wire for each camera? Monitor will be automatically switched to the image of the camera which is triggered, and back to the last mode when the trigger stops. VThe trigger delay time can be adjusted (0-4s) on each camera. In standby mode, monitor will turn on automatically when triggered and will switch to the image of the triggered camera. Built-in short-circuit protectorWhen installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. Wide-Angle, Water-Proof, Night Vision? PAL / NTSC system (optional)? View angle: 120 degree? Horizontal Resolution : 420 TV Line? Video output : 1.0 Vp_p/75 ohm? S/N ratio : > 48 db? Electronic shutter : 1/60 1/10000 sec? How to connect the whole system? Please have a look at below picture guide. I’ve connected then well. It is very easy. By the way, there is a green wire in this picture, it is for reverse power. If you do not know where to connect it, please just keep it blank, the whole system still works. This picture also shows all the main parts of this system, including monitor, camera, extension cable, power cable. Monitor bracket and remote control(no li-battery) are not showed in this picture, but you also can find them in the packing box. Any question on this system, please feel free to send us a message. We will reply to you very fast. It usually takes about 3-7days to arrive any countries in the world. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “truckcamsolution” and is located in this country: US. This item can be shipped to United States.
  • Camera Connection Type: Wired
  • Screen Display: TFT – LCD
  • CABLE LENGTH: 10METERS
  • Brand: AP
  • Type: Rear View Camera Kit
  • Screen Size: 7\
  • POWER INPUT: DC12V~36V
  • Compatible Vehicle Make: Universal
  • Country of Manufacture: China
  • CAMERA: COLOR CCD, WATERPROOF, NIGHT VISION
  • MPN: 414207
  • UPC: 602938046725

7 Rear View Backup Camera Cab Observation System For Skid Steer/heavy Equipment