Backup Camera System 7 LCD Screen Rear View Safety Audio RV Truck Motorhome Bus

Posted on July 23, 2016 by admin

This backup camera system is complete with a crystal clear 7 DIGITAL TFT LCD Color monitor with mirror image capability, a 3 channel multiplexer (can connect a dvd player or other cameras) with automatic system switch, 130° SHARP CCD backup camera with 50 foot infra-red night vision and all the wires, connectors and mounts you will need. Commercial grade – weather & shock resistant. 7 THIN COLOR LCD monitor – Mirror image capability. 3 channel multiplexer which allows you to add 2 additional cameras. 130° ccd camera with 18 infra-red illuminators night vision. Automatic system switch – Microphone – See & Hear whats behind you. The item “Backup Camera System 7 LCD Screen Rear View Safety Audio RV Truck Motorhome Bus” is in sale since Sunday, May 17, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “sanhern” and is located in USA. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, BR, CL, CO, CR.

Screen Size: 7″
MPN: RVS-770613
Brand: RVS

Dual Reversing Camera Fitted To Motorhome Rear View Mirror Monitor Parking Camera

Posted on July 20, 2016 by admin

7 Rear View Reversing Camera Kit System For Camper Motorhome Truck Farm Ag

Posted on July 19, 2016 by admin

7INCHES REAR VIEW BACKUP CAMERA SYSTEM CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. This is the extension cable that we supply. How to connect/install the whole system. We supply with a 15 meters and a 10 meters extension cables for this system. Connect one end of the 15 meters extension cable to the black connector which is marked with FOR CAM1 in the above picture. Connect one end of the 10 meters extension cable to the black connector which is marked with FOR CAM2 in the above picture. Then connect the two cameras to the other ends of the 15 meter and the 10 extension cables. Power the monitor with DC12-24V from your vehicle. Power + for the red wire, and the black wire for Ground/. The green wire, it can be kept blank or powered by reverse power. Then the whole system will work. Screen size: 7 inch (diagonal length). [16 : 9] wide screen display. 2 ways video inputs, 1 ways trigger. AV-in in front of the panel. Build-in display delay function when reversing with 25 seconds adjustable. PAL & NTSC auto switching. Power supply: DC 12-24V. Built in speaker(camera without microphone). Remote control, OSD menu. Image can be adjusted upside down. Support multi languages: Chinese, English, Japanese, French, Spanish, Arabic, Germany, etc. View angel range:(left/right)65º (top)40º (down)15º. Touch button control. With Stand & U shape bracket – Dimension: 180x121x23mm. Sensor1/3 SONY Color CCD. Resolution :420 TV lines. Video format: PAL / NTSC optional. Infrared LED light: 18PCS. Waterproof RateIP69K, (Micro-dust can not come into the inside of the camera, and the camera can resist the high pressure water of 10000KPa from the spray nozzle, and no water come into the camera at all). Shell material: aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. It usually takes about 3-7days to arrive any countries in the world. The item “7 REAR VIEW REVERSING CAMERA KIT SYSTEM FOR CAMPER MOTORHOME TRUCK FARM AG” is in sale since Friday, July 01, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2012iloveit” and is located in Guangzhou. This item can be shipped worldwide.

Type: Rear View Camera Kit
Brand: AP
MPN: 812053
Screen Size: 7″ DIGITAL SCREEN
Country of Manufacture: China
CAMERA: COLOR CCD, WATERPROOF, NIGHT VISION
POWER INPUT: DC12-24V
CABLE LENGTH: 15METERS*1, 10METERS*1

Twin Rear View Camera Carmedien CM-DRFK1 for Van RV Motor Home Motorhome Backup

Posted on July 12, 2016 by admin

Twin Rear View Camera CM-DRFK1. Carmedien offer you with the Twin Rear View Camera CM-DRFK1 a special Version with two camera modules. One Module is for safety parking and the other one is “digital mirror” camera. Perfect safety for Van, RV and Truck. Twice safe: The new Twin Rear View Camera CM-DRFK1 with base and roof made of stainless steel. The body is made of aluminum die casting and everything is additionally. Special coated, that protects against corrosion and enables water roll off. Thanks to the two camera modules you can use the model CM-DRFK1 for. Observation of the near and far range behind your vehicle. The first cam featured with 1/3 Sony CCD Sensor and visible 120° field of view: perfect to see the direct range. And the second one also with 1/3 Sony CCD Sensor and visible 60° field of view: developed to see the far range during the trip (Digital Rear View Mirror). Both cameras can be adjusted manual in angle to your needs and are featured with 12 IR LED for perfect night vision (automatic switch on). Thanks to 120 ° field of view the model CM-DRFK1 is a full rear view camera for observation of the. Near range behind your vehicle. Additionally you have with the 60° module a “digital rear-view mirror” for observation of the. F ixed connection: Camera and cable are connected via a water-resistant screwed plug. Monitor connection: Connector cable and monitor are simply connected via RCA. Moreover there is a switching pulse cable for the back-up light available (auto on). Two adjustable camera modules. 120 ° field of view for near range. 60 ° field of view for far range (the traffic behind the vehicle). Each with digital 1/3. 12 high-end IR LED for perfect night vision. Perfect color/contrast because of digital sensor. Igh resolution (pixel) 500(H)×582(V) – 420 TV lines (horizontal). Screwed connection between camera and connector cable. A ll-over special coating. 15m connector cable, roof and base (made of stainless steel) and fitting material. Operating voltage 12V / 4W (2W per module). 100(W)x86(H)x50(D). Camera sided screwed connection (weatherproof) also for outboard laying and monitor sided. Video output via RCA. This allows connection to many monitors or multimedia systems. The special feature of this cable is the. Integrated wire for reverse gear switch, for Auto On function during reversing. (if supported by your monitor). You only need to install one cable through the vehicle it manages all connections. Most competitors offer cameras without multifunctional cable -> additional cables must be installed. Why should you choose the reverse camera CM-DRFK1? Meanwhile a lot of replicas are available on the market. Base and roof made of stainless steel with special all-over white coating, two high-quality Sony CCD sensors, 12 IR diodes per module and the special 15m connector cable are just a few highlights that distinguish this model. The detection angle is important also: For the near range we use an angle of 120 °, so you observe with a mounting height of 2.30m more than 4m in width (with virtual no distortion). That affords perfect parking. Other models use 150° and more, that causes strong distortion in image border. For the far range we use 60° to see the far range behind the vehicle primary. Other models work here with 90° or more, they image too much content in width, thereby far away objects are shown simply too small. Here we summarize the highlights once again. 2 Camera Modules with High-Quality Sony CCD Sensor. 120° Field Of View For Near Range. 60° Field Of View For Far Range. 12 Infrared Diodes Per Camera Module. Holder and Roof made Of Stainless Steel. A ll-Over White Special Coating. I ncluding 15m Special – Connectr-Cable (Only One Cable To Install). Connector Cable With Internal Switching Pulse For Back-Up Light. More information about us! Here you get perfect Service from Germany. Our catalog (only in German language at the moment). Some of our references. For iPhone or iPad. Safety on the road. Warum sind Sie bei uns gut aufgehoben sind. Möchten Sie per Nachname zahlen? Weitere Informationen erhalten Sie auf unserer mich – Seite. Wir arbeiten als reiner Versandhandel, Abholungen sind dennoch willkommen. Carlights wurde im Dezember 2002 durch den Inhaber Christian Jurtz gegründet. Unter der Eigenmarke Carmedien erfolgt die Produktion und Vertrieb diverser Car Multimedia Artikel, Rückfahrsysteme und Rückfahrkameras. Bei Interesse an Produkten dieser Art sind Sie als Kunde bei Carlights in besten Händen. Sie erwartet eine fachlich kompetente Beratung , hervorragende Produkte und eine professionelle Abwicklung… The item “Twin Rear View Camera Carmedien CM-DRFK1 for Van RV Motor Home Motorhome Backup” is in sale since Friday, February 07, 2014. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “carlightsde” and is located in Felixsee. This item can be shipped worldwide.

Brand: Carmedien
Camera Connection Type: Wired
Reversing Camera Type: Color Camera with high Quality CCD Sensor
Version: Double Backup Camera
MPN: Art. 1501

Rear View Backup Camera System 7 Digital Wireless Split Monitor For Motorhome

Posted on May 22, 2016 by admin

We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 7 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 with mirror image, CAM2 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. Monitor in split view mode. Monitor in single view mode with rear distance scale. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-766M2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS2). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. We supply the monitor and the camera with power extension cables(about 1.2meters long) as showed in below picture. When installing them, you just need to plug the power. Cables to the camera and the monitor, then connect the power. Cables to your vehicle power positive polarity 11-32V DC and negative polarity. Then the whole system will work. Thanks for your business! If have questions on how to install the system, please contact me! The item “REAR VIEW BACKUP CAMERA SYSTEM 7 DIGITAL WIRELESS SPLIT MONITOR FOR MOTORHOME” is in sale since Tuesday, November 26, 2013. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.

Type: Rear View Camera Kit
Brand: VEISE
MPN: DF-766M2362
Screen Size: 7″
Country of Manufacture: China
CAMERA: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
MONITOR: 7″ WIRELESS SPLIT TFT LCD MONITOR
WIRELESS TRANSMITTING: 2.4GHZ, DIGITAL SIGNAL

7 DIGITAL WIRELESS REAR VIEW BACKUP CAMERA SYSTEM FOR MOTORHOME 5TH WHEEL

Posted on April 26, 2016 by admin

We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. It can be used as a vision solution. 7 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. Monitor in single view mode with rear distance scale. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-766M2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1 with mirror image, CAM2 with non-mirror/normal image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). Thanks for your business! If have questions on how to install the system, please contact me! The item “7 DIGITAL WIRELESS REAR VIEW BACKUP CAMERA SYSTEM FOR MOTORHOME 5TH WHEEL” is in sale since Monday, September 29, 2014. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.

Type: Rear View Camera Kit
Brand: VEISE
MPN: Does Not Apply
Screen Size: 7″
Country of Manufacture: China
Wireless BACK-UP Camera System: 2.4GHz Digital Wireless Signal
CAMERA: ONE WIRELESS CAMERAS WITH NIGHT VISION
MONITOR: 7″ WIRELESS TFT LCD MONITOR

9 DIGITAL WIRELESS SPLIT LCD+1 BACKUP CAMERA REAR VIEW SYSTEM FOR RV MOTORHOME

Posted on April 26, 2016 by admin

We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 9 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 9 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 9 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1132V. Monitor can be set as split view mode or single view mode. When the monitor is in single view mode and displaying the image of camera1, there will be a rear distance scale on the screen. Digital Wireless Receive Monitor(Model:SP-966M2). 9 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. Free Operating Voltage: DC1032V. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS1). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1 with mirror image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. Thanks for your business! If have questions on how to install the system, please contact me! The item “9 DIGITAL WIRELESS SPLIT LCD+1 BACKUP CAMERA REAR VIEW SYSTEM FOR RV MOTORHOME” is in sale since Thursday, July 30, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.

Type: Rear View Camera Kit
Brand: VEISE
MPN: DF-966M2361
Screen Size: 9″
Country of Manufacture: China
CAMERA: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
MONITOR: 9″ WIRELESS SPLIT TFT LCD MONITOR
WIRELESS TRANSMITTING: 2.4GHZ, DIGITAL SIGNAL