For Dodge Dakota (1997-2011) Chrome Tailgate Handle Backup Camera

Posted on October 26, 2022 by admin

For Dodge Dakota (1997-2011) Chrome Tailgate Handle Backup Camera

Tailgate WITH Backup Reverse Camera (Full Color Camera). Description: This is an aftermarket tailgate and camera, not OEM. For the power supply, you can connect it to any 12V power source. For example, if you wanted the camera to always be on, you can connect it to a 12v source that is on all the time, or if you only want it when you reverse you can connect it to the reverse taillights. Includes video and power extension cable, 8 Meters. Note: This is for the Tailgate Bezel only. Please use your existing handle with this Tailgate Bezel. Camera Specs: Sensor: ¼ On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic) Minimum Illumination. 1 Lux light sensitivity Signal System : NTSC/PAL Effective Pixel : NTSC: 728 x 582, PAL: 728 x 512 Video Output : 1.1Vp-p 75 Ohm Electronic Shutter : 1/50 to 1/100,000 seconds Resolution : 600 TV line Angle : 170 Degree Waterproof Rate : IP68 Current Consumption : 120mA Max. Power : DC 12V Cable Length : Video Cable: 8M Parking Grid Lines: Included with option to disable. Before purchasing check the back of your Monitor/Screen that you have a Yellow RCA input for easy installation. This tailgate handle is not recommended to be installed with Factory Navigation/Monitor units. It is possible but requires professional installation. 1 Lux light sensitivity [ANGLE]: Wide View 170 Degrees – Clearly see your Trailer Hitch! This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “tailgatesandmore” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Malaysia, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica.

Model: MT-DD97C
Compatible Vehicle Make: Dodge
MPN: MT-DD97C
Brand: Master Tailgaters
UPC: 819952025340

IBeam TE-DDTG Tailgate Handle Camera Dodge Dakota 2005-2011

Posted on April 9, 2022 by admin

IBeam TE-DDTG Tailgate Handle Camera Dodge Dakota 2005-2011

Car Harnesses & Interfaces. Car Stereos & Headunits. Blu-ray & DVD Players. LCD Screen Cleaning Kit. TV Mounts & Brackets. Exit Buttons and Devices. Junction Boxes / Mounts. Power Boxes (Power Supplies). Parking Sensor & Backup System. Ask question about this item. Upgrade older trucks with modern technology for better visibility while backing up. IBEAM’s replacement tailgate handle camera lets you add a backup camera with selectable parking lines and a high-quality sensor for nighttime viewing. This OE-style handle has a low-profile camera and is designed to match the original look and feel of the vehicle. Resolution: 400 TV lines. Field of view: 186. Minimum Illumination: 0.1 Lux. 26 feet of extension cable. Boxes on some of our items. International rates/services vary and are available upon request. At The Wires Zone, we want to make sure that you are completely satisfied. We can provide you with the information you will need and you will need to contact them directly. IBeam TE-CSC Chrome Micro Reverse Backup Camera 170 Degree Viewing Angle. Install Bay TE-SBC 170 Degree Viewing Angle Small Bullet Backup Reverse Camera. Rear View / Back-Up License Plate Cam Metal Base Waterproof 150° View w/Guidelin. IBeam TE-CCDL1 Adjustable 12 IR LED Universal Dual-View Commercial Camera. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “the_wires_zone” and is located in this country: US. This item can be shipped to United States.

Camera Connection Type: Wired
Model: TE-DDTG
MPN: TE-DDTG
Compatible Vehicle Make: Dodge
Brand: Ibeam
Type: Rear View Camera Kit
UPC: 086429413713

Rear View Camera Interface Kit for 2008-2010 Dodge Dakota Factory OEM Radio

Posted on May 16, 2017 by admin

Connecting a backup camera to your vehicle’s OEM radio has never been easier!! This complete OEM interface kit allows you to easily connect a backup camera and enable the backup / rearview camera feature directly on your OEM Radio No visit to the dealership required! Simply connect your backup camera to your factory radio screen using the included Auto-I Rearview Camera Input Harness then plug the genie programmer into your vehicle’s OBDII port (under your steering column). The programmer will enable the backup camera feature on your vehicle’s computer just like it would from the factory. Unplug the programmer and your navigation system is ready to display your backup camera. This revolutionary product allows just about any Chrysler Group owner to program their vehicle for backup / rear view camera. Installation is a breeze and takes only a few minutes. Simply install your backup camera to your factory radio screen then plug this programmer into your vehicle’s OBDII port (under your steering column). This programmer will work on any Chrysler, Dodge, Jeep, or Ram truck vehicle (excluding the 200, Cherokee, and Promaster). The vehicle must have a factory radio with a screen and be rear camera ready. When I put my vehicle in reverse will the camera turn on? The camera image will be shown on the factory radio when your vehicle is put into reverse. Does the programmer need to stay plugged in? No, the programmer is removed and no longer needed once installation is complete. It is our way of trying to reduce our impact on landfills. Where does the video harness plug into on the radio? The video harness plugs into the unused connector behind your radio. Will this work with any camera? Whether it is our camera or a camera of your choice, this product is compatible with any camera. The video connection is a RCA connector. How many vehicles can be programmed? Each programmer is capable of upgrading one vehicle. If you have multiple vehicles please message me. The item “Rear View Camera Interface Kit for 2008-2010 Dodge Dakota Factory OEM Radio” is in sale since Monday, May 15, 2017. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “backupcarcamera” and is located in West Hartford, Connecticut. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Brazil, Chile, Colombia, Costa rica.

MPN: JK-VID
Brand: Backup Car Camera