Alpine KCX-C2600B Universal 2-Camera Switcher

Alpine KCX-C2600B Universal 2-Camera Switcher

Alpine KCX-C2600B Universal 2-Camera Switcher
Dual-camera selector interface for use with aftermarket cameras and receivers. Enhanced for use with Alpine Direct cameras. Two proprietary inputs: compatible with two Alpine Direct cameras. One RCA input for use with non-Alpine multi-view camera. Select camera view from included remote. Includes required video and power cables. What’s in the box. Dual multi-camera selector interface module (attached 6.5′ power/ground/reverse-in wires and 19.5′ reverse out wire). Controller (attached 9.75′ cable). 6.5′ Composite video cable. Written by Crutchfield’s Alexander H. For two Alpine direct cameras The KCX-C2600B interface gives you the ability to switch between Alpine Direct front- and rear-view cameras (not included) using an aftermarket car stereo, afactory radio, or a monitor with an RCA input – a great help for parking, towing, and more. The included two-button controller lets you take advantage of multi-view functionality: rear, panorama, corner, and ground selectable views. Or for one aftermarket multi-view camera If you own a non-Alpine camera with a multi-view feature, Alpine gives you an RCA input so you can use the included controller to switch between views. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “crutchfield_electronics” and is located in this country: US. This item can be shipped to United States.
  • Brand: Alpine
  • MPN: KCX-C2600B
  • UPC: 793276040923
  • Model: Alpine KCX-C2600B

Alpine KCX-C2600B Universal 2-Camera Switcher

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome
This wired two-camera system is complete with a crystal clear 7 LED Panel color monitor with distance grid lines and mirror image capability, a power harness, two 120° color CCD 480TVL camera with 50 foot infra-red night vision and all the wires, connectors and mounts you will need. With built-in system memory, this innovative system automatically saves previous option settings even after it’s turned off. This system has two viewing options. The camera view can be triggered when the vehicle is put into reverse, or remain on continuously. IT CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. 7 WIRED SIGLE VIEW MONITOR1. WATERPROOF NIGHT VISION CAMERA. WITH 4 PIN CONNECTOR. 15METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. 10METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. U-type bracket for monitor 1. 1.7 TFT LCD monitor, 16:9 and 800RGB x480. Supports MAX 2 cameras. Separatedly set each camera’s mirror/normal image. Image also can be turned up-side-down. Support up to 2 video inputs, 1 way trigger wires. Free power input:DC12-24V. Power polarity reversed protection. Monitor only supplies camera which is in use with DC12V, Energy saving. Distance gride line can be turned on or off by menu. Aviation 4-pin connectors with screw-lock. Image can be rotated by menu to make it to be mirror/normal/up-side-down image. 7 Inch Wired Single View LCD monitor. Resolution: 800(RGB)480. Support 2 cameras video input. One trigger control wire. Menu to set up reversing image delay time 0-15s, mirror/normal image. Monitor will automatic switch-over the image to related camera and back to. The original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera image, Trigger end after shutdown. Built-in short-circuit protector When installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. 2.120 degree viewing angle. Aviation 4-pin connector with screw-lock. Sensor:1/3 Sharp CCD. Video format: PAL / NTSC optional. Infrared LED light: 6PCS. Waterproof Rate:IP69K, (Micro-dust can not come into the inside of the camera, and the camera can resist the high pressure water of 10000KPa from the spray nozzle, and no water come into the camera at all). Shell material: aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. It usually takes about 3-7days to arrive any countries in the world. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “truckcamsolution” and is located in this country: US. This item can be shipped to United States.
  • Camera Connection Type: Wired
  • Compatible Vehicle Make: Universal
  • Screen Display: TFT – LCD
  • Country of Manufacture: China
  • CAMERA: WATERPROOF, NIGHT VISION
  • Type: Reversing Camera
  • POWER INPUT: DC12V-24V
  • CABLE LENGTH: 15METERS*1, 10meters*1
  • Brand: AP
  • Screen Size: 7\
  • UPC: 602938046275

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Motorhome

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv
This wired two-camera system is complete with a crystal clear 7 LED Panel color monitor with distance grid lines and mirror image capability, a power harness, two 120° color CCD 480TVL camera with 50 foot infra-red night vision and all the wires, connectors and mounts you will need. With built-in system memory, this innovative system automatically saves previous option settings even after it’s turned off. This system has two viewing options. The camera view can be triggered when the vehicle is put into reverse, or remain on continuously. IT CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. 7 WIRED SIGLE VIEW MONITOR1. WATERPROOF NIGHT VISION CAMERA. WITH 4 PIN CONNECTOR. 15METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. 10METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. U-type bracket for monitor 1. 1.7 TFT LCD monitor, 16:9 and 800RGB x480. Supports MAX 2 cameras. Separatedly set each camera’s mirror/normal image. Image also can be turned up-side-down. Support up to 2 video inputs, 1 way trigger wires. Free power input:DC12-24V. Power polarity reversed protection. Monitor only supplies camera which is in use with DC12V, Energy saving. Distance gride line can be turned on or off by menu. Aviation 4-pin connectors with screw-lock. Image can be rotated by menu to make it to be mirror/normal/up-side-down image. 7 Inch Wired Single View LCD monitor. Resolution: 800(RGB)480. Support 2 cameras video input. One trigger control wire. Menu to set up reversing image delay time 0-15s, mirror/normal image. Monitor will automatic switch-over the image to related camera and back to. The original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera image, Trigger end after shutdown. Built-in short-circuit protector When installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. 2.120 degree viewing angle. Aviation 4-pin connector with screw-lock. Sensor:1/3 Sharp CCD. Video format: PAL / NTSC optional. Infrared LED light: 6PCS. Waterproof Rate:IP69K, (Micro-dust can not come into the inside of the camera, and the camera can resist the high pressure water of 10000KPa from the spray nozzle, and no water come into the camera at all). Shell material: aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. It usually takes about 3-7days to arrive any countries in the world. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “truckcamsolution” and is located in this country: US. This item can be shipped to United States.
  • Camera Connection Type: Wired
  • Compatible Vehicle Make: Universal
  • Screen Display: TFT – LCD
  • Country of Manufacture: China
  • CAMERA: WATERPROOF, NIGHT VISION
  • Type: Reversing Camera
  • POWER INPUT: DC12V-24V
  • CABLE LENGTH: 15METERS*1, 10meters*1
  • Brand: AP
  • Screen Size: 7\
  • UPC: 602938046428

7 Rear View Backup Reverse 2-camera System For Skid Steer, Box Truck, Van, Rv

7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor

7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor

7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor
This wired two-camera system is complete with a crystal clear 7 LED Panel color monitor with distance grid lines and mirror image capability, a power harness, two 120° color CCD 480TVL camera with 50 foot infra-red night vision and all the wires, connectors and mounts you will need. With built-in system memory, this innovative system automatically saves previous option settings even after it’s turned off. This system has two viewing options. The camera view can be triggered when the vehicle is put into reverse, or remain on continuously. IT CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. 7 WIRED SIGLE VIEW MONITOR1. WATERPROOF NIGHT VISION CAMERA. WITH 4 PIN CONNECTOR. 15METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. 10METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. U-type bracket for monitor 1. 1.7 TFT LCD monitor, 16:9 and 800RGB x480. Supports MAX 2 cameras. Separatedly set each camera’s mirror/normal image. Image also can be turned up-side-down. Support up to 2 video inputs, 1 way trigger wires. Free power input:DC12-24V. Power polarity reversed protection. Monitor only supplies camera which is in use with DC12V, Energy saving. Distance gride line can be turned on or off by menu. Aviation 4-pin connectors with screw-lock. Image can be rotated by menu to make it to be mirror/normal/up-side-down image. 7 Inch Wired Single View LCD monitor. Resolution: 800(RGB)480. Support 2 cameras video input. One trigger control wire. Menu to set up reversing image delay time 0-15s, mirror/normal image. Monitor will automatic switch-over the image to related camera and back to. The original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera imageTrigger end after shutdown. Built-in short-circuit protector When installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. 2.120 degree viewing angle. Aviation 4-pin connector with screw-lock. Video format: PAL / NTSC optional. Infrared LED light: 6PCS. Waterproof RateIP69K, (Micro-dust can not come into the inside of the camera, and the camera can resist the high pressure water of 10000KPa from the spray nozzle, and no water come into the camera at all). Shell material: aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. It usually takes about 3-7days to arrive any countries in the world. The item “7 REAR VIEW BACKUP REVERSE 2-CAMERA SYSTEM FOR SKID STEER, TRUCK, TRACTOR” is in sale since Thursday, August 6, 2020. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “truckcamsolution” and is located in Dallas, Texas. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.
  • Camera Connection Type: Wired
  • Compatible Vehicle Make: Universal
  • Screen Display: TFT – LCD
  • Country of Manufacture: China
  • CAMERA: WATERPROOF, NIGHT VISION
  • Type: Reversing Camera
  • POWER INPUT: DC12V-24V
  • CABLE LENGTH: 15METERS*1, 10meters*1
  • MPN: Does Not Apply
  • Brand: AP
  • Screen Size: 7″

7 Rear View Backup Reverse 2-camera System For Skid Steer, Truck, Tractor

9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System

9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System
9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System
9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System

9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System
9 INCHES DIGITAL WIRELESS REVERSING CAMERA SYSTEM CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, TRAILER, RV, 5TH WHEEL, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. DIGITAL WIRELESS CMOS WATERPROOF NIGHT VISION CAMERA. This is a digital wireless camera system. The monitor and the camera does not have built-in battery for recharging. They should be connected to 1132V DC, your vehicle power or a power source, when they are working. Wireless only means signal is transmitted without cable. POWER THEM, THEN THEY WILL WORK FOR YOU. SO EASY TO USE. NO INTERFERENCE, NO WORRY ABOUT RECEPTION. Characteristics of the monitor. Digital wireless signal receiver. There is no interference. Do not need to worry about the wireless reception. The monitor can be set as single view or split/dual view. This system includes two cameras, both of the cameras can be displayed on the monitor at the same time. The monitor also can be set as single view to display the camera one by one. When the monitor is displaying CAM1/CH1, there is a rear distance scale on the screen to show the distance between the rear bumper of vehicle and the object. And this rear distance scale also can be cancelled by menu. The mirror/non-mirror image of the cameras can be switched by menu on screen. Digital Wireless Receive Monitor. 9 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. Free Operating Voltage: DC1032V. Digital Wireless Waterproof IR Camera. Image Type: 1/4 inch Color CMOS(works as well as ccd). Built in 2.4GHz Digital wireless transmitter. Transmission Power18dBm with Power control. Line of Sight Range:100M. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 120°. Free Operating Voltage: DC10-32 Volts. Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). It will take about 10-days to arrive. The item “9 MONITOR DIGITAL WIRELESS REAR VIEW BACKUP 2-CAMERA CAB OBSERVATION SYSTEM” is in sale since Monday, July 04, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2012iloveit” and is located in Guangzhou. This item can be shipped worldwide.
  • Type: Rear View Camera Kit
  • Brand: APT
  • MPN: 044295
  • Screen Size: 9″ DIGITAL WIRELESS SCREEN
  • Country of Manufacture: China
  • CAMERA: DIGITAL WIRELESS, COLOR, WATERPROOF, NIGHT VISION
  • POWER INPUT: DC11-32V INPUT
  • FREQUENCY: DIGITAL 2.4GHZ WIRELESS

9 Monitor Digital Wireless Rear View Backup 2-camera Cab Observation System