This is the new Volkswagen rotating VW logo camera replacing the VW logo at the rear. You need to take out the original VW logo, then installing this fliping camera. It is Fashionable and cool design. Compatible cars: VW Passat CC/ Golf / Magotan / Phaeton or other VW cars, who’s VW logo at the rear can be replaced. Your monitor or headunit must have the video input. For Volkswagen Vw: Magotan, Magotan B6/B7, Golf 6, Golf7, Golf GTI, Golf R CC Golf 7. VGIC:Beetle, Polo, EOS, Lamando. Also will fit Golf 5. Logo on your trunk is removable and it is a locking mechanism that flips up to unlock the trunk. Key Features: Imaging sensor: 1/3 SONY CCD Effective Pixels : 1 million Angle Wide: Angle of 170 degrees Motor: imported motor Switch : Japan Omron switch Scanning Area: 1/4:3.62.7MM2 1/3:4.93.7MM2 Video output : 1.1Vp-p 75 Shutter Speed : 1/50-1/100000(s) Horizontal Resolution: 520TVlines Power : DC12V ± 10% 250MA ± 10% Gamma value: 0.45 Lowest illumination : 0.01Lux/F1.2 0.5Lux /F1.2 Waterproof Rate : IP67/68 Note:This unit just fit the car’s radio with screen. RGB Decoder for radio. How to distinguish between RCD510 and RNS315/ RNS510 1. RNS510 With Navigation system. RCD510 and RNS315 Without navigation system. One side of RCD510’S Key number is Three, one side RNS315’s key number is Four. Water pipe: connect 1 to white color water outlet of camera, number8. Bigger end in the boot side. Connector for Truck switch: number 2 connect to lock of boot. Parking Line: connect this wire, Parking line on; don’t connect it, Parking line off. Red color wire: 12V”+” positive. Need to connect to car dvd player 12V “+” yellow color Battery wire. Please don’t connect to ACC wire, or you can’t open your boot. Black color wire: 12V”-“negative. Need to connect to car dvd player 12V “-” black color GND wire. Don’t connect to iron of car, its wrong way. Blue color wire: reverse signal wire. Connect to car reverse light 12V “+” 7. RCA video out: connect to car dvd player “camera video in” RCA plug. Water outlet of camera: connect to number 1 pipe. Camera power connector: connect to number 10. Connect to number 9. 11-12 camera video: number 11 connect to number 12. 13: reverse control wire: camera reverse control wire need to connect to car dvd player reverse control wire. After installation the flip camera, please use the following tools to activate the rearview function of the headunit: The following software are not included. It is the example of how to activate the rearview function. These charges are the buyers responsibility. We are not responsible for wrong or undeliverable address. If there is any delay, it may be caused by bad weather or custom inspection. We try our best to make you get your desired products as soon as possible. Please read the item’s instruction detailly. Our working time: 9:30AM18:00PM Monday-Friday Chinese Time. If you are interested in an item that isn’t listed in our online shop, but you think that we might be able to offer related information, then please feel free to let us know. We can shop together! The item “Vw Emblem Logo Reverse Camera for RNS315/510 RCD510 iPAS RVC CAM Badge 5053 data” is in sale since Sunday, June 12, 2016. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “honfox2012″ and is located in ShenZhen, . This item can be shipped to North, South, or Latin America, to all countries in Europe, to all countries in continental Asia, to Australia.

• Type: Rear View Camera Kit
• Brand: Unbranded/Generic
• MPN: does no apply
• Country/Region of Manufacture: China
• Country of Manufacture: China