Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A
Ford Backup Camera Input Harness and CANopener Flash Programmer. For SYNC 1 4.2 Screen Systems. Have a question or need advice first? Send us a Message! Add the input and capability of a backup camera to your 4.2 Screen System (see screen compatibility below). There are 2 versions of this bundle for the 4.2 screen depending on model and year. Be sure to use the compatibility listing to ensure you are purchasing the correct bundle. Another in the line of CANopener products! This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle with SYNC 1 (MyFord) in three easy steps. Install our (optional) Plug n’ Play “T” harness behind the touchscreen. Plug the camera of your choice into our T harness. Easily enable the backup camera input using included CANopener Flash programmer. The CANopener Flash programmer plugs into your vehicle’s OBDII diagnostic port under your steering column. In a matter of seconds, the Flash will enable the backup camera feature on your vehicle’s touchscreen. It will show the attached backup camera when the vehicle is placed in reverse – just like it would from the factory! Camera Video “T” Harness. Easy Plug n’ Play install. Simple DIY vehicle programming. Programming with the CANopener Flash. (same procedure with 4.2 screen). CANopener Flash Programmer – YouTube. Video will open in a new window. 4.2 MyFord Screen – Backup Camera Compatibility Testing – YouTube. Our harness will support any vehicle backup camera with a standard RCA connection. Please note, you will need to follow the camera instructions for sourcing power. If your screen is not listed please refer to the compatibility testing video. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen. This kit does not include a camera. Our staff has been part of the car audio and accessory industry for many years – specifically we have been involved in the sale, repair and modification of these Ford navigation systems since they were introduced. Our narrow focus on Ford navigation systems and accessories combined with our years of experience allow us to truly be the experts on these units. We engineer many products and solutions allowing us to offer products not available anywhere else. Our engineering team has developed custom hardware \ software tools used to program, test and diagnosis these systems. We believe service is important, not only before the sale to help you understand the options and which might be best for you but also after the sale. Our friendly and experienced technical staff are here to help. Our technicians have actually done many of these installs\upgrades and can answer most questions quickly and accurately. Everyone says they offer top-notch service but unfortunately not everyone does, so don’t just take our word for it, find out for yourself. Give us a call, write us a message or catch us on instant chat and let us prove it. We believe we accomplish this with quality products, superior service and good pricing. The item “Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A” is in sale since Monday, December 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “4dtech” and is located in Webster, New York. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 4DT-FLASHCMB-02A
  • Brand: 4D Tech
  • Non-Domestic Product: No

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2 A

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2
Ford Backup Camera Input Harness and CANopener Flash Programmer. For SYNC 1 4.2 Screen Systems. Have a question or need advice first? Send us a Message! Add the input and capability of a backup camera to your 4.2 Screen System (see screen compatibility below). NOTE: There are 2 versions of this bundle for the 4.2 screen depending on model and year. Be sure to use the compatibility listing to ensure you are purchasing the correct bundle. Another in the line of CANopener products! This simple to install kit allows you to add a backup camera to any Ford or Lincoln vehicle with SYNC 1 (MyFord) in three easy steps. Install our (optional) Plug n’ Play “T” harness behind the touchscreen. Plug the camera of your choice into our T harness. Easily enable the backup camera input using included CANopener Flash programmer. The CANopener Flash programmer plugs into your vehicle’s OBDII diagnostic port under your steering column. In a matter of seconds, the Flash will enable the backup camera feature on your vehicle’s touchscreen. It will show the attached backup camera when the vehicle is placed in reverse – just like it would from the factory! Camera Video “T” Harness. Easy Plug n’ Play install. Simple DIY vehicle programming. Programming with the CANopener Flash. (same procedure with 4.2 screen). CANopener Flash Programmer – YouTube. Video will open in a new window. 4.2 MyFord Screen – Backup Camera Compatibility Testing – YouTube. Our harness will support any vehicle backup camera with a standard RCA connection. Please note, you will need to follow the camera instructions for sourcing power. If your screen is not listed please refer to the compatibility testing video. Please note, ALL Ford screens require the camera to be powered from an ignition switched power source (one that turns on and off with the vehicle). DO NOT CONNECT YOUR CAMERA TO THE REVERSE LIGHT. The delay in the reverse lights powering the camera will cause the Ford screen to be black with no image and / or an error message to show on the screen. This kit does not include a camera. Our staff has been part of the car audio and accessory industry for many years – specifically we have been involved in the sale, repair and modification of these Ford navigation systems since they were introduced. Our narrow focus on Ford navigation systems and accessories combined with our years of experience allow us to truly be the experts on these units. We engineer many products and solutions allowing us to offer products not available anywhere else. Our engineering team has developed custom hardware \ software tools used to program, test and diagnosis these systems. We believe service is important, not only before the sale to help you understand the options and which might be best for you but also after the sale. Our friendly and experienced technical staff are here to help. Our technicians have actually done many of these installs\upgrades and can answer most questions quickly and accurately. Everyone says they offer top-notch service but unfortunately not everyone does, so don’t just take our word for it, find out for yourself. Give us a call, write us a message or catch us on instant chat and let us prove it. We believe we accomplish this with quality products, superior service and good pricing. The item “Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2″ is in sale since Monday, December 10, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Interior\Other”. The seller is “4dtech” and is located in Webster, New York. This item can be shipped to United States, Canada.
  • Modified Item: No
  • Custom Bundle: No
  • Manufacturer Part Number: 4DT-FLASHCMB-02
  • Brand: 4D Tech
  • Non-Domestic Product: No

Backup Camera Programmer & Harness for SYNC 1 4 screens Rear Reverse 4.2