9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 9 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 9 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 9 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1132V. Monitor can be set. Monitor can be set in single view mode. When the monitor is in single view mode and displaying the image of camera1, there will be a rear distance scale on the screen. Digital Wireless Receive Monitor(Model:SP-966M2). 9 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. Free Operating Voltage: DC1032V. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS2). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1 with mirror image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. Thanks for your business! If have questions on how to install the system, please contact me! The item “9 DIGITAL WIRELESS SPLIT LCD REAR VIEW BACKUP CAMERA SYSTEM NO INTERFERENCE” is in sale since Wednesday, May 11, 2011. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: VEISE
  • Model: DF-966M2361
  • MPN: DF-966M2361
  • Screen Size: 9″
  • Country/Region of Manufacture: China
  • Wireless BACK-UP Camera System: WATERPROOF&IR&SHOCKPROOF
  • Monitor: 9″ WIRELESS SPLIT TFT LCD MONITOR
  • Camera: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
  • WIRELESS TRANSMITTING: 2.GHZ DIGITAL WIRELESS SIGNAL

9 Digital Wireless Split LCD Rear View Backup Camera System No Interference

Incoming search terms:

  • interference in rearview camera

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
DIGITAL BACK UP CAMERA SYSTEM 7 WIRELESS REAR VIEW LCD, NO INTERFERENCE. 7 wireless backup system+1. Digital Wireless Receive Monitor 7 Digital Screen TFT LCD Monitor with Removable Sun Visor Built in 2 CH 2.4GHz Digital Wireless Receiver Operation Frequency:2400 2483.5MHz Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE) Overlapping Hopping Channel:80 Color System:PAL/NTSC Display Resolution: 800RGB(H) X 480(V) dot Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65 Brightness (cd/m2): 450 Contrast ratio: 500:1 Operating temperature: -20 to +70 Storage temperature: -30 to +80 Free Operating Voltage: DC1032V Digital Wireless Waterproof IR Camera Image Type: 1/4 inch Color CMOS(same performance as CCD) Built in 2.4GHz Digital wireless transmitter CAM1 with mirror image Wireless Range:10M Horizontal Resolution:420TV Lines Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V) Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark) Free viewing angle: 115° Waterproof: IP69K Shockproof: 10G Free Operating Voltage: DC10-32 Volts Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). 7 WIRELESS LCD MONITOR1 2. WIRES FOR POWER 4. ACCESSORIESThis kit does not have remote control. It is easy and safe. Check will be held until cleared. Otherwise, Unpaid Item dispute will. If you can’t get your items in time, please contact to us first, we will check and solve it for you soon. PlPlease check with your. Local custom for duty rate. It is not included in this price. And should undertake it themselves. The item “DIGITAL BACK UP CAMERA SYSTEM 7 WIRELESS REAR VIEW LCD, NO INTERFERENCE” is in sale since Thursday, December 17, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “exsupply2000″ and is located in Hebron, Kentucky. This item can be shipped to United States, to all countries in Europe, to Canada, to Mexico, to Japan, to Australia.
  • Type: Rear View Camera Kit
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • Screen Size: 7″
  • Camera Connection Type: Wireless
  • UPC: Does not apply

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference

7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference
7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference
7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference

7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 7 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 with mirror image, CAM2 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. Monitor in split view mode. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-766M2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS2). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. We supply the monitor and the camera with power extension cables(about 1.2meters long) as showed in below picture. When installing them, you just need to plug the power. Cables to the camera and the monitor, then connect the power. Cables to your vehicle power positive polarity 11-32V DC and negative polarity. Then the whole system will work. Thanks for your business! If have questions on how to install the system, please contact me! The item “7 DIGITAL WIRELESS SPLIT REAR VIEW BACKUP CAMERA SYSTEM FARM, NO INTERFERENCE” is in sale since Wednesday, May 11, 2011. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: VEISE
  • MPN: DF-766M2362
  • Screen Size: 7″
  • Country/Region of Manufacture: China
  • CAMERA: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
  • MONITOR: 7″ SPLIT TFT LCD MONITOR
  • WIRELESS TRANSMITTING: 2.4GHZ, DIGITAL SINGAL

7 Digital Wireless Split Rear View Backup Camera System Farm, No Interference

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference
We offers Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL Wireless TFT LCD Monitor X1. DIGITAL Wireless IR Camera X1. Power cable for camera. This is a digital wireless camera system. It means only the signal is wireless. The monitor and the camera do not have built-in batteries. They should be connected to power to work. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split/Non-split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 an CAM2 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed450cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. 7 Digital Wireless TFT LCD Monitor. Digital Screen displays more clear than analog screen monitor. NO INTERFERENCE, NO WORRY ABOUT RECEPTION. In the above picture the red wire is for DC10-32V positive polarity. The black one for negative polarity. The brown one is the trigger wire for camera1. It can be connected to reverse lamp power or kept blank. The blue one is the trigger wire for camera2. Please keep it blank. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-723H2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (185X122X28mm) without mounting Sun Visor. Digital screen, built-in digital wireless video receiver. Screen can be set as single view and dual view. Image can be adjusted horizontally and vertically to set mirror or non-mirror image. If the monitor works with two cameras, it can be set to scan automatically between cameras by the UP and DOWN keys. CH1 has rear distance scale which can be set as ON/OFF. The ambient backlit of the monitor can be turn ON/OFF, so at night the light of LCD screen will not dazzle the driver to ensure a safe drive. Monitor passed the load dump and ESD tests. Digital Wireless Wateproof Shockproof Camera. 1/3 COLOR CMOS Camera, 500tvl high resolution. (the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. How to install this system? Power the monitor’s red and black wires by vehicle power DC10-32V. Power the camera’s red and black wires also by vehicle battery DC10-32V or reverse lamp power. Then the whole system will work. It’s very easy. Digital Wireless Waterproof IR Camera(MODEL:DF-8275H-SFS2). Image Type: 1/3 inch Color CMOS. Horizontal Resolution:500TV Lines. Built in 2.4GHz Digital wireless transmitter. Transmission Power18dBm with Power control. Effective pixel:NTSC:720(H)X480(V);PAL:720(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 120°. Free Operating Voltage: DC10-32 Volts. Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). Digital wireless video transmitter built-in. High resolution 500TV Lines. If have questions on how to install the system, please contact me! Thanks for your business! The item “DIGITAL BACK UP CAMERA SYSTEM 7 WIRELESS REAR VIEW LCD, NO INTERFERENCE” is in sale since Thursday, February 10, 2011. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: VEISE
  • MPN: DF-723H2361-1
  • Screen Size: 7″
  • MONITOR: 7″ DIGITAL WIRELESS
  • CAMERA: WIRELESS HQ COLOR CAMERA WITH NIGHT VISION
  • FRQUENCY: 2.4GHZ
  • POWER INPUT: DC10-32V FREE POWER INPUT

Digital Back Up Camera System 7 Wireless Rear View Lcd, No Interference

7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference

7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference
7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference
7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference

7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL Wireless TFT LCD Monitor X1. DIGITAL Wireless IR CCD Camera X2. Power cables for monitor and camera. This is a digital wireless camera system. It means only the signal is wireless. The monitor and the camera do not have built-in batteries. They should be connected to power to work. Monitor has two kinds of view mode which can be set by button. Single view, to see the camera one by one by press the switch button on the panel. Split view, to see both cameras at the same time on the screen. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split/Non-split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 an CAM2 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed450cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. 7 Digital Wireless TFT LCD Monitor. Digital Screen displays more clear than analog screen monitor. NO INTERFERENCE, NO WORRY ABOUT RECEPTION. In the above picture the red wire is for DC10-32V positive polarity. The black one for negative polarity. The brown one is the trigger wire for camera1. It can be connected to reverse lamp power or kept blank. The blue one is the trigger wire for camera2. It can be connected to left/right turning power or kept blank. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-723H2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (185X122X28mm) without mounting Sun Visor. Digital screen, built-in digital wireless video receiver. Screen can be set as single view and dual view. Image can be adjusted horizontally and vertically to set mirror or non-mirror image. If the monitor works with two cameras, it can be set to scan automatically between cameras. CH1 has rear distance scale which can be set as ON/OFF. The ambient backlit of the monitor can be turn ON/OFF, so at night the light of LCD screen will not dazzle the driver to ensure a safe drive. Monitor passed the load dump and ESD tests. Digital Wireless Wateproof Shockproof CCD Camera. 1/3 COLOR CMOS Camera, 500tvl high resolution. (the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. How to install this system? Power the monitor’s red and black wires by vehicle power DC10-32V. Power the camera’s red and black wires also by vehicle battery DC10-32V or reverse lamp power. Then the whole system will work. It’s very easy. Digital Wireless Waterproof IR Camera(MODEL:DF-8275H-SFS2). Image Type: 1/3 inch Color CMOS. Horizontal Resolution:500TV Lines. Built in 2.4GHz Digital wireless transmitter. Transmission Power18dBm with Power control. Effective pixel:NTSC:720(H)X480(V);PAL:720(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 120°. Free Operating Voltage: DC10-32 Volts. Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). Digital wireless video transmitter built-in. High resolution 500TV Lines. If have questions on this system, please feel free to contact me! Thanks for your business! The item “7 INCH DIGITAL WIRELESS SPLIT LCD REAR VIEW BACKUP CAMERA SYSTEM NO INTERFERENCE” is in sale since Thursday, February 10, 2011. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Camera Kit
  • Brand: VEISE
  • MPN: df-723h2362
  • Screen Size: 7″
  • Camera Connection Type: Wireless
  • MONITOR: 7 Inch wireless TFT LCD with DIGITAL SIGNAL
  • CAMERA: Waterproof, IR, wireless

7 Inch Digital Wireless Split LCD Rear View Backup Camera System No Interference

9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference

9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference
9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference
9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference

9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 9 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 9 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 9 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1132V. Monitor can be set as split view mode or single view mode. When the monitor is in single view mode and displaying the image of camera1, there will be a rear distance scale on the screen. Digital Wireless Receive Monitor(Model:SP-966M2). 9 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. Free Operating Voltage: DC1032V. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS2). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1 with mirror image, CAM2 with mirror image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). Thanks for your business! If have questions on how to install the system, please contact me! The item “9 DIGITAL WIRELESS REAR VIEW BACKUP CAMERA SYSTEM KIT SPLIT LCD NO INTERFERENCE” is in sale since Monday, March 10, 2014. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Camera Kit
  • Brand: VEISE
  • MPN: DF-966M2362
  • Screen Size: 9″
  • Country of Manufacture: China
  • CAMERA: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
  • MONITOR: 9″ WIRELESS SPLIT TFT LCD MONITOR
  • WIRELESS TRANSMITTING: 2.4GHZ, DIGITAL SIGNAL

9 Digital Wireless Rear View Backup Camera System Kit Split LCD No Interference

Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference

Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference
Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference
Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference

Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL WIRELESS REARVIEW BUCKUP CAMERA SYSTEM, 2.4GHZ WIRELES DIGITAL TRANSMITTER, NO INTERFERENCE. 7 WIRELESS LCD MONITOR1. ACCESSORIESThis kit does not have remote control. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split/Non-split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed400cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. Monitor in split view mode. Monitor in single view mode with rear distance scale. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-766M2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity -86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Color System:PAL/NTSC(AUTO). Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (199 x 128 x 28mm) without mounting Sun Visor. 1/4 COLOR CMOS Camera(the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. Digital Wireless Waterproof IR Camera(MODEL:DF-8275SFS1). Image Type: 1/4 inch Color CMOS(same performance as CCD). Built in 2.4GHz Digital wireless t ransmitter. CAM1/2 with mirror image. Horizontal Resolution:420TV Lines. Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 115°. Free Operating Voltage: DC10-32 Volts. 106(W) x 75(H) x 70.4(D) mm (without mounting). The monitor image can be set as non-mirror, mirror, upside down by menu. We supply the monitor and the camera with power extension cables(about 1.2meters long) as showed in below picture. When installing them, you just need to plug the power. Cables to the camera and the monitor, then connect the power. Cables to your vehicle power positive polarity 11-32V DC and negative polarity. Then the whole system will work. Thanks for your business! If have questions on how to install the system, please contact me! The item “REAR VIEW BACKUP CAMERA SYSTEM 7 DIGITAL WIRELESS MONITOR, NO INTERFERENCE” is in sale since Thursday, January 23, 2014. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Camera Kit
  • Brand: VEISE
  • MPN: DF-766M2361
  • Screen Size: 7″
  • Country of Manufacture: China
  • CAMERA: 1/4 inch Color CMOS, WATERPROOF, NIGHT VISION
  • MONITOR: 7″ WIRELESS SPLIT TFT LCD MONITOR
  • WIRELESS TRANSMITTING: 2.4GHZ, DIGITAL SIGNAL

Rear View Backup Camera System 7 Digital Wireless Monitor, No Interference

7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference

7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference
7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference
7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference

7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference
We offer Rear View Back up Camera System, Reversing Camera System, TFT LCD Monitor, Auto Shutter Camera and CCTV Camera for Car, Heavy Truck, Trailer, SUV, Farm Tractor, Forklift, Compactor Vehicle, Street Sweeper, Mobile Home, Passenger Bus and Mining Vehicle. We’ve been in this field since 1997 producing cctv cameras and car rear view camera systems. In 1999 we were the First factory producing infrared waterproof camera in China. Since then we served thousands of customers perfectly. We absolutely know we do not have the lowest price on the internet. All of the products are designed by ourselves, we choose the best materials from USA and Japan, we do not use any electrical components made in our China, because we need high quality material to ensure the stability of our products. We have professional engineers who have ten years’ experience in this field. So we can help our clients to solve any fault in use. We are top quality, we passed following tests. Load dump means the disconnection of a powered load. It can cause 2 problems. Failure of supply to equipment or customers II. Large voltage spikes from the inductive generator(s) In automotive electronics, it refers to the disconnection of the vehicle battery from the alternator while the battery is being charged. Due to such a disconnection of the battery, other loads connected to the alternator see a surge in power line. The peak voltage of this surge may be as high as 120 V and the surge may take up to 400 ms to decay. The transient high voltage which ususally occurs in automotive will damage the rear view camera system, if the system has no protection circuit. Our monitor uses a special component inside to avoid the damage. The transient high voltage will never damage our monitor. Following shows the test procedure. Connect power supply to DC input of load dump generator. Connect output of the load dump generator to component power supply lines. Set DC supply so that DC voltage to the component is 13.8VDC measured at the component. Chassis of DUT shall be physically isolated from the ground plane, and the DC supply should be electrically grounded to the ground plane. After test our monitor has no damage at all. Ri = 0.4. Electrostatic discharge (ESD) is the sudden flow of electricity between two objects caused by contact, an electrical short, or dielectric breakdown. ESD can be caused by a buildup of static electricity by tribocharging, or by electrostatic induction. ESD includes spectacular electric sparks, but also less dramatic forms which may be neither seen nor heard, yet still be large enough to cause damage to sensitive electronic devices. Electric sparks require a field strength above about 4 KV/cm in air, as notably occurs in lightning strikes. Other forms of ESD include corona discharge from sharp electrodes and brush discharge from blunt electrodes. The ESD will do harm to rear view camera system if there is no ESD protection circuit. When user operate and touch the monitor, the high electrostatic voltage of 2kv/4kv/5kv/6kv/8kv will discharge between the user and monitor, and the high voltage will damage the monitor. The high electrostatic voltage will never damage our monitor. Test methods: contact or air discharge are both acceptable. Isolate the DUT from ground-plate. We apply the discharge of 2kv/4kv/5kv/6kv/8kv to every point that the user may touch when operating our monitor. After test, our monitor still work well, no damage at all. IP69K Waterproof and Dust-proof Test. NOZZLE WATER SPRAY TEST. 7 DIGITAL Wireless TFT LCD Monitor X1. DIGITAL Wireless IR COLOR Camera X1. Power cables for monitor and camera. This is a digital wireless camera system. It means only the signal is wireless. The monitor and the camera do not have built-in batteries. They should be connected to power to work. What is the difference between analog wireless camera system and the above digital wireless camera system? Both of them use the same 2.4GHz frequency technology. The 2.4GHz frequency is very common , many of our wireless device use this frequency, such as wireless router, bluetooth, etc. So the analog wireless camera system sometimes receives signal wireless routers, bluetooth and cellphone, and interferenced caused. There is no other device can transmits the same digital signal as the camera. Digital Wireless Split/Non-split Monitor Camera system. No Need to Run Cables Through Farm TractorHorse Trailer, Allow You to View Your Horses and Back View. 7 Digital Split Screen TFT LCD Monitor Built-in 2.4GHz Digital Wireless Receiver, NO INTERFERENCE AT ALL. Monitor Using Techwell(made in USA) main chipset, industrial grade chipset, specially for auto electronics, more stable. CAM1 with rear view distance scale. CAM1 an CAM2 with mirror image. Image Modes: single view or split view. When monitor displays in split view mode, the rear view distance scale will not be displayed on screen. DC14+87V(Td400mS) 5pulses Load Dump Test Passed450cd/m2 Brightnes. 2.4GHz Digital Wireless Camera Aluminum Camera IP69K Waterproof and 10G Vibration, IR LEDs for Night Vision. Free Operating Voltage: DC1032V. 7 Digital Wireless TFT LCD Monitor. Digital Screen displays more clear than analog screen monitor. NO INTERFERENCE, NO WORRY ABOUT RECEPTION. In the above picture the red wire is for DC10-32V positive polarity. The black one for negative polarity. The brown one is the trigger wire for camera1. It can be connected to reverse lamp power or kept blank. The blue one is the trigger wire for camera2. Please keep it blank. We’ve tested that the temperature given out by the electric components inside the monitor can increase as high as 80 centigrade, which may cause the monitor to stop working and shorten the life of all the electrinc components inside. Plenty of radiation windows ensure there is no high temperature inside the monitor. Monitor housing can resist high temperature in cab. Especially in summer, when we park our truck in the open air, the temperature in the cab is rather high. In the market there are huge number of monitors whoes housings are made from PC, because it is cheap. The high temperature may distort the housing of this kind of low-end monitor. But, please do not worry, the housing of our monitor is made from PC+ABS, which has a higher ability in resisting high temperature inside the cab. Our monitor uses TECHWELL chip solution which is made in USA. TECHWELL chip is industrial grade solution. It is special desgined for auto electronic, more stable than the comsumer-electronic chip. Digital Wireless Receive Monitor(Model:SP-723H2). 7 Digital Screen TFT LCD Monitor with Removable Sun Visor. Built in 2 CH 2.4GHz Digital Wireless Receiver. Operation Frequency:2400 2483.5MHz. Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE). Overlapping Hopping Channel:80. Display Resolution: 800RGB(H) X 480(V) dot. Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65. Contrast ratio: 500:1. Operating temperature: -20 to +70. Storage temperature: -30 to +80. External dimensions:(L x W x T) (185X122X28mm) without mounting Sun Visor. Digital screen, built-in digital wireless video receiver. Screen can be set as single view and dual view. Image can be adjusted horizontally and vertically to set mirror or non-mirror image. If the monitor works with two cameras, it can be set to scan automatically between cameras. CH1 has rear distance scale which can be set as ON/OFF. The ambient backlit of the monitor can be turn ON/OFF, so at night the light of LCD screen will not dazzle the driver to ensure a safe drive. Monitor passed the load dump and ESD tests. Digital Wireless Wateproof Shockproof Camera. 1/3 COLOR CMOS Camera, 500tvl high resolution. (the same performance as ccd camera). Waterproof, Night Vision, Wireless Digital Transmitter Built-in. How to install this system? Power the monitor’s red and black wires by vehicle power DC10-32V. Power the camera’s red and black wires also by vehicle battery DC10-32V or reverse lamp power. Then the whole system will work. It’s very easy. Digital Wireless Waterproof IR Camera(MODEL:DF-8275H-SFS2). Image Type: 1/3 inch Color CMOS. Horizontal Resolution:500TV Lines. Built in 2.4GHz Digital wireless transmitter. Transmission Power18dBm with Power control. Effective pixel:NTSC:720(H)X480(V);PAL:720(H)X480(V). Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark). Free viewing angle: 120°. Free Operating Voltage: DC10-32 Volts. Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). Digital wireless video transmitter built-in. High resolution 500TV Lines. If have questions on this system, please feel free to contact me! Thanks for your business! The item “7 DIGITAL WIRELESS REAR VIEW BACKUP CAMERA SYSTEM IR REVERSE NO INTERFERENCE” is in sale since Friday, August 22, 2014. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “1stsafe” and is located in Guangzhou. This item can be shipped to United States, to all countries in Europe, to all countries in continental Asia, to Canada, to Australia.
  • Type: Rear View Monitor w/Cam Kit
  • Brand: VEISE
  • MPN: DF-723H2361
  • Screen Size: 7″ digital lcd
  • Camera Connection Type: Wireless
  • Wireless BACK-UP Camera System: WATERPROOF&IR&SHOCKPROOF
  • Monitor: 7″ LCD with built-in digital wireless receiver
  • Camera: ONE Camera with 18 LED IR lights

7 Digital Wireless Rear View Backup Camera System Ir Reverse No Interference

9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE

9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE

9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
9 DIGITAL WIRELESS SPLIT MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE. Please note : Other Areas except USA will send through China Warehouse after Chinese New Year , please consider it carefully before ordering, thanks. 9 WIRELESS LCD MONITOR1 2. WIRES FOR POWER 4. ACCESSORIESThis kit does not have remote control. Digital Wireless Receive Monitor 9 Digital Screen TFT LCD Monitor with Removable Sun Visor Built in 2 CH 2.4GHz Digital Wireless Receiver Operation Frequency: 2400 2483.5MHz Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE) Overlapping Hopping Channel:80 Color System:PAL/NTSC Display Resolution: 800RGB(H) X 480(V) dot Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65 Brightness (cd/m2): 450 Contrast ratio: 500:1 Operating temperature: -20 to +70 Storage temperature: -30 to +80 Free Operating Voltage: DC1032V Digital Wireless Waterproof IR Camera Image Type: 1/4 inch Color CMOS(same performance as CCD) Built in 2.4GHz Digital wireless transmitter CAM1 with mirror image Wireless Range:100M Horizontal Resolution:420TV Lines Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V) Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark) Free viewing angle: 115° Waterproof: IP69K Shockproof: 10G Free Operating Voltage: DC10-32 Volts Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). The item “9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE” is in sale since Thursday, February 12, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2012carmm” and is located in Hebron, Kentucky. This item can be shipped worldwide.
  • Type: Rear View Camera Kit
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • Screen Size: 9″

9 DIGITAL WIRELESS AGRICULTURE REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE

7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE

7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE

7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE
7 DIGITAL WIRELESS SPLIT MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE. 7 WIRELESS LCD MONITOR1 2. WIRES FOR POWER 4. ACCESSORIESThis kit does not have remote control. Digital Wireless Receive Monitor 7 Digital Screen TFT LCD Monitor with Removable Sun Visor Built in 2 CH 2.4GHz Digital Wireless Receiver Operation Frequency: 2400 2483.5MHz Receiving Sensitivity-86dBm(1MHZ QPSK MD300RE) Overlapping Hopping Channel:80 Color System:PAL/NTSC Display Resolution: 800RGB(H) X 480(V) dot Wide view angle(CR>10):(up/ down): 45/65 (left/right): 65/65 Brightness (cd/m2): 450 Contrast ratio: 500:1 Operating temperature: -20 to +70 Storage temperature: -30 to +80 Free Operating Voltage: DC1032V Digital Wireless Waterproof IR Camera Image Type: 1/4 inch Color CMOS(same performance as CCD) Built in 2.4GHz Digital wireless transmitter CAM1 with mirror image Wireless Range:100M Horizontal Resolution:420TV Lines Effective pixel:NTSC:640(H)X480(V);PAL:640(H)X480(V) Usable Illumination : 0Lux (Built in 18pcs IR LED’s for Picture Support in the Dark) Free viewing angle: 115° Waterproof: IP69K Shockproof: 10G Free Operating Voltage: DC10-32 Volts Dimensions: 106(W) x 75(H) x 70.4(D) mm (without mounting). The item “7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE” is in sale since Monday, August 10, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2012carmm” and is located in Hebron, Kentucky . This item can be shipped worldwide.
  • Type: Rear View Camera Kit
  • Brand: Unbranded/Generic
  • MPN: Does Not Apply
  • Screen Size: 7″
  • Camera Connection Type: Wireless

7 DIGITAL WIRELESS MONITOR REAR VIEW BACKUP CAMERA SYSTEM, NO INTERFERENCE