Land Rover Defender 4×4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001

Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001
Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001
Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001
Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001

Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001
Land Rover Defender 4×4 Rear View Reversing Camera w/ 3.5 LCD Monitor – GRC001. Waterproof Rear View or Reverse Camera with 3.5 inch LCD Monitor. Easy to install, drill a 10mm hole in the number plate light plinth LR Part No. 345597, not included and secure with supplied nylon nut. IP68 rated camera is water and dust tight, full submersion, jet washing and mud will not damage it. Incredibly useful for actually seeing the tow ball when hitching up or just normal reversing. 3.5 inch monitor can be mounted next to the vent with supplied 3M adhesive pad. The robust discreet camera is approx 3cm Wide by 3cm Deep and is IP68 rated. Comes with 13 metres of cable, each connect is 10mm making it easy to route. For further details see the Product Description below. Why would I want one? Seeing exactly what is behind a 4×4 is not easy using conventional mirrors. This kit is a practical driver assistance device with the primary objective of helping the driver to see things that they may not otherwise see when reversing. Designed in Silicon Valley, California, the product is engineered to the highest standards with a focus on making it simple to install, robust and discreet. What is in the kit? The kit consists of an IP68 rated Black Lacquer MicroBlock camera which when installed can offer a view of the tow ball and entire area behind the vehicle when reversing. Black IP68 rated camera, with 10mm thread – Control box (brain) – Extension cables (13 metres) – 3.5 LCD Monitor. How does it work? One connection is made to the reversing light circuit and ground to the bodywork. A single cable is then fed through the vehicle from the back to the front to connect the camera to the 3.5 slim line monitor. No other work is involved. When the vehicle is put into reverse gear, a sharp and vivid image is instantly displayed on the screen. How long will it last? The camera is the only external part and much like the vehicle it will be installed on it can be submerged in water, it can be blasted by a jet wash, sprayed with mud. Effectively there is very little that can be done to damage the camera, short of hitting it with a solid object. But even then it can withstand some abuse. Can you add a other AmeriCam products or a DVR using the same screen? – Forward facing – High mount rear cams – Trailer cams (wired) – SD or HDD DVR. 30cm x 20cm x 20cm. Carriage costs are for UK mainland ONLY. Highlands and Islands are not included within the UK Mainland. (Post codes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE PO30, PO34-40, IM, BT & Channel Islands). However we will not accept claims of damage in transit or if products not meeting their description outside this period. If your product has been damaged in transit it must be reported within 24 hours of receipt. After this time, we may not accept responsibility. How do I arrange a return? Tiger Parts UK Lund Court Farm Nawton York North Yorkshire YO62 7TZ. T: +44(0)1751 430 693. The item “Land Rover Defender 4×4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001″ is in sale since Tuesday, December 06, 2016. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “tiger_parts” and is located in York. This item can be shipped worldwide.
  • Brand: – -
  • Manufacturer Part Number: – -

Land Rover Defender 4x4 Rear View Reversing Camera with 3.5 LCD Monitor GRC001