Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer

Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer
Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer
Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer
Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer

Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer
7INCHES REAR VIEW BACKUP CAMERA SYSTEM CAN BE USED FOR FARM TRACTOR, SCHOOL BUS, GARBAGE TRUCK, SWEEPER, AGRICULTURE EQUIPMENTS, HEAVY EQUIPMENTS, MOTORHOME TO ELIMINATE THE BLIND SPOT BEHIND THE VECHILES. 7 WIRED SIGLE VIEW MONITOR1. CCD WATERPROOF NIGHT VISION CAMERA. WITH 4 PIN CONNECTOR. 15METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. 10METERS EXTENSION CABLE WITH 4 PIN CONNECTOR1. The 15 meters and 10 meters extension cables that we supply. How to connect/install the whole system. We supply with a 15 meters and a 10 meters extension cables for this system. There are three black connectors which are marked. With TO CONNECT CAMERA(S) in the above picture. Connect the 15 meters and the 10 meters extension cables to two of the black connectors. Then connect the camera to the other ends of the 15 meter. And the 10 meters extension cables. Power the monitor with DC12-24V from your vehicle. Power + for the red wire, and the black wire for Ground/. There are two trigger wires in the picture, green and blue. You can see them in the picture, you can power. One by reverse power or keep both trigger wires blank. Then the whole system will work. Monitor can shows rear distance scale. It can be set or cancelled by OSD menu. Image displayed by monitor also can be adjusted as mirror or non-mirror. By OSD menu: reverse from left to right, turn upside down. 7 Inch Wired Color Single View LCD monitor. Resolution: 800 3(RGB)480. Support 3 cameras video input. Separate trigger control wires for AV2/AV3. Menu to set up reversing image delay time 0-15s, mirror/normal image. Monitor will automatic switch-over the image to related camera and back to. The original mode when the trigger stops. In standby mode, monitor will turn on automatically when triggered and will switch to back up camera imageTrigger end after shutdown. Keys with LED backlit. Built-in short-circuit protector When installing and connecting the kit, people connects the female 4-pin connectors to the male one from the camera and monitor, they sometimes connect the video pin of the camera to the power pin of the monitor. It may cause a short-cut, the built-in protector may keep the monitor away from being burnt. Waterproof ccd color rear view camera with night vision, 4pin connector. Sensor1/3 SHARP Color CCD. Resolution :420 TV lines. Video format: PAL / NTSC optional. Infrared LED light: 18PCS. Waterproof RateIP69K, (Micro-dust can not come into the inside of the camera, and the camera can resist the high pressure water of 10000KPa from the spray nozzle, and no water come into the camera at all). Shell material: aluminum alloy camera never gets rusty, and has a higher ability in heat radiation than iron housing. Dustproof, waterproof, hydrochloric acid prevention, explosion prevention. It will take about 10-days to arrive. The item “REAR VIEW BACKUP CAMERA SYSTEM CCTV 7 MONITOR WITH TWO CAMERAS FOR SKID STEER” is in sale since Friday, August 28, 2015. This item is in the category “Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits”. The seller is “2012iloveit” and is located in Guangzhou. This item can be shipped worldwide.
  • Type: Rear View Camera Kit
  • Brand: AP
  • MPN: 812046
  • Screen Size: 7″, WIRED SIGNLE VIEW LCD SCREEN
  • Country of Manufacture: China
  • CAMERA: COLOR CCD, WATERPROOF, NIGHT VISION
  • POWER INPUT: DC12V-36V
  • CABLE LENGTH: 15METERS*1,10METERS*1

Rear View Backup Camera System Cctv 7 Monitor With Two Cameras For Skid Steer

Comments are closed.